The catalyst for oxidative coupling of methane prepared from zirconyl chloride and sodium pyrophosphate

Add time:08/02/2019    Source:sciencedirect.com

The catalysts prepared from zirconyl chloride and sodium pyrophosphate exhibited high activity and selectivity for the oxidative coupling of methane. We suggest that the catalytically active substances are most likely to be NaCl-promoted sodium zirconium phosphates and NaCl plays a key role in activity and selectivity of the catalyst system. The highest C2+ selectivity was 79% at the methane conversion of 28% (C2+ yield 22%) and the highest C2+ yield was about 30% with the C2+ selectivity of 66–70% at the methane conversion of 41–44%. The ethene/ethane ratio higher than 10 and the C3+ selectivity of about 10–20% were obtained. Over the catalysts with the Na/Zr ratio greater than about 2, the C2+ selectivity did not decrease much with time on-stream in spite of the significant decrease of the activity. The main reason for the catalyst deactivation is probably the disappearance of NaCl.

We also recommend Trading Suppliers and Manufacturers of Zirconyl hydroxide (cas 12161-08-9). Pls Click Website Link as below: cas 12161-08-9 suppliers

Prev:The effect of processing parameters on particle size in ammonia-induced precipitation of zirconyl chloride under industrially relevant conditions
Next:Industrial precipitation of zirconyl chloride: The effect of pH and solution concentration on calcination of zirconia)