Investigation of nanomechanical and adhesion behavior for AlN coating and AlN/Fe2-3N composite coatings created by Active Screen Plasma Nitriding on Al 1050

Add time:07/17/2019    Source:sciencedirect.com

This study investigated the effect of nitriding time and temperature on the mechanical properties of the composite AlN/Fe2-3N coating deposited on the pure aluminium substrate using the novel Active Screen Plasma Nitriding (ASPN) method. ASPN treatment was performed for 2, 5, 10, 15 h at temperatures of 450,500, and 550 °C and Conventional Plasma Nitriding (CPN) treatment was carried out for 5 h at 500 °C. All treatments were performed at the 10 KHz frequency with 80% duty cycle on the Al1050 substrate under 20%H2+80%N2 atmosphere. Phase and microstructure studies were performed using, respectively, the grazing incidence x-ray diffraction (GIXRD) system and the field emission - scanning electron microscopy (FE-SEM) system equipped with energy-dispersive spectroscopy (EDS) analyzer. The mechanical strength of the coating was evaluated by the roughness, nano-hardness, nano-scratch, and adhesion strength tests performed on coated and uncoated specimens. According to the results, the uncoated Al1050 specimen, the CPN-treated specimen, and the ASPN-treated specimen had a mean nano-hardness of 0.7 ± 0.1 GPa, 10.9 ± 0.6 GPa, and 9.6 ± 0.5 GPa, respectively. It was also found that the single-phase AlN coating has a better adhesion strength and scratch strength (LC3 = 12 N) than the composite AlN/Fe2-3N coating (LC3 = 10 N). Examination of scratch mechanisms in hard AlN and AlN + Fe2-3N coatings deposited on a soft aluminium substrate showed that the failures in these coatings are due to tensile-type Hertzian cracks. However, as the load increases, the substrate undergoes increasing deformation and failures shift to chipping and interfacial spallation.

We also recommend Trading Suppliers and Manufacturers of Aluminum nitride (AlN) (cas 24304-00-5). Pls Click Website Link as below: cas 24304-00-5 suppliers

Prev:First-principles calculations of aluminium nitride monolayer with chemical functionalization
Next:Preparation of aluminum nitride by combustion of a Mg-Al alloy)