Preparation of CADMIUM STANNATE (cas 12185-56-7) films by spray pyrolysis technique

Add time:08/02/2019    Source:sciencedirect.com

CADMIUM STANNATE (cas 12185-56-7) thin films were prepared by spray pyrolysis technique using cadmium acetate and tin(II) chloride precursors at substrate temperatures 450 °C and 500 °C. XRD pattern confirms the formation of orthorhombic (1 1 1) cadmium stannate phase for the film prepared at substrate temperature of 500 °C, whereas, films prepared at 450 °C are amorphous. Film formation does not occur at substrate temperature from 300 to 375 °C. SEM images reveal that the surface of the prepared Cd2SnO4 film is smooth. The average optical transmittance of ∼86% is obtained for the film prepared at substrate temperature of 500 °C with the film thickness of 400 nm. The optical band gap value of the films varies from 2.7 to 2.94 eV. The film prepared at 500 °C shows a minimum resistivity of 35.6 × 10−4 Ω cm.

We also recommend Trading Suppliers and Manufacturers of CADMIUM STANNATE (cas 12185-56-7). Pls Click Website Link as below: cas 12185-56-7 suppliers

Prev:Effect of calcining temperature on electrical and dielectric properties of CADMIUM STANNATE (cas 12185-56-7)
Next:Transparent front contact optimization in dye sensitized solar cells: use of CADMIUM STANNATE (cas 12185-56-7) and titanium oxide by sputtering)