Promoting sulfidation of smithsonite by zinc sulfide species increase with addition of ammonium chloride and its effect on flotation performance
-
Add time:07/13/2019 Source:sciencedirect.com
The sulfidation-flotation method is commonly used for the treatment of zinc oxide minerals. However, few studies have been conducted on the promoting sulfidation-flotation behavior and mechanism of smithsonite. In this paper, we investigate the promoting sulfidation of smithsonite by zinc sulfide species increase with addition of ammonium chloride (NH4Cl) and its effect on flotation performance. The micro-flotation experiment results concluded that the addition of the ammonium chloride improved smithsonite flotation recovery by ∼17%. Zinc ion adsorption experiments and Visual MINTEQ model analysis showed that more zinc sulfide species were produced in the presence of NH4Cl. Zeta potential analysis indicated that additional sulfide ion species and isoamyl xanthate ions (IX−) from the pulp solution adhered to the smithsonite surface as NH4Cl was added, and the SEM-EDS study and the contact angle results further confirmed the positive influence of NH4Cl on the smithsonite sulfidation process. The TOF-SIMS results provided strong evidence for an increase in zinc sulfide species on the smithsonite surface and an increase in the sodium isoamyl xanthate (NaIX) molecular adsorption on the surface of sulfidized smithsonite with the addition of NH4Cl. The thickness of zinc sulfide species formed after promoting sulfidation was ∼29.20 nm, and the thickness of xanthogenate species formed was a few nanometers. The promotion in sulfidation may be due to the combined effect of the improvement of sphalerite precipitation adsorption and the ion-exchange reaction between the sulfide ions and the carbonate ions on the surface of the smithsonite.
We also recommend Trading Suppliers and Manufacturers of ZINC AMMONIUM CHLORIDE (cas 14639-97-5). Pls Click Website Link as below: cas 14639-97-5 suppliers
Prev:Efficiently enriching zinc(II) from and into ammonium chloride media with species regulation and Aliquat336
Next:Chitosan coatings ionically cross-linked with ammonium paratungstate as anticorrosive coatings for zinc) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Hydrometallurgical extraction of zinc from CaO treated EAF dust in ammonium chloride solution07/18/2019
- Solvent extraction of zinc from chloride solutions using dialkyl derivatives of 2,2′-bibenzimidazole as extractants07/17/2019
- Electrorefining zinc dross in ammoniacal ammonium chloride system07/16/2019
- Selective process of zinc extraction from spent Zn–MnO2 batteries by ammonium chloride leaching07/15/2019
- Chitosan coatings ionically cross-linked with ammonium paratungstate as anticorrosive coatings for zinc07/14/2019
- Efficiently enriching zinc(II) from and into ammonium chloride media with species regulation and Aliquat33607/12/2019
- Leaching kinetics of zinc silicate in ammonium chloride solution07/11/2019
-
Health and Chemical more >
-
Related Products
- Ammonium (-)-3-bromo-8-camphorsulfonate
- Ammonium (S)-5-((4-amino-4-carboxy-1-oxobutyl)amino)-2-nitrobenzoate
- Ammonium 1-pyrrolidinedithiocarbamate
- Ammonium 2,4-dichlorophenoxyacetate
- Ammonium 2-hydroxyethanesulphonate
- Ammonium 4-nitrobenzoate dihydrate
- Ammonium acetate
- Ammonium adipate
- Ammonium alginate
- Ammonium azide


