Strength-toughness improvement of martensite-Austenite (cas 12244-31-4) dual phase deposited metals after Austenite (cas 12244-31-4) reversed treatment with short holding time

Add time:08/07/2019    Source:sciencedirect.com

To obtain a better strength-toughness balance of martensite-Austenite (cas 12244-31-4) dual phase deposited metals, an austenite reversed treatment (ART) with short holding time (namely S-ART), combining with the advantage of quenching & partitioning (Q&P) is proposed. The dual phase deposited metal is heated to the intercritical region (620 °C) for austenite reversion with a short holding time of 0.5 h. Compared to the conventional ART (C-ART) with the holding time of 2.0 h, S-ART provides significant improvement in yield strength, elongation and impact toughness. Due to the stronger partitioning effect of carbon, the carbon concentration of the retained austenite (RA) during S-ART is higher than that of C-ART and as-welded. Therefore, the stability of the RA in S-ART state increases dramatically and induces sustained transformation induced plasticity (TRIP) effect, which contributes to the enhancement of yield strength, ductility and toughness. Moreover, after S-ART, the volume fraction of RA increases and the dislocation density in martensite decreases significantly, further improving the ductility and toughness.

We also recommend Trading Suppliers and Manufacturers of Austenite (cas 12244-31-4). Pls Click Website Link as below: cas 12244-31-4 suppliers

Prev:Isolation of a novel lipid hapten, cytolipin S, from rat spleen
Next:Evidence of Austenite (cas 12244-31-4) memory in PH 15-5 and assessment of its formation mechanism)