Electropolymerization, characterization and corrosion performance of poly(N-Ethylaniline (cas 103-69-5)) on copper

Add time:08/12/2019    Source:sciencedirect.com

Poly(N-ethylaniline) (PNEA) coatings were grown by cyclic voltammetry technique on copper from 0.1 M N-ethylaniline (NEA) in 0.3 M oxalic acid solution. The optimum conditions (e.g. upper potential limit, scan rate and cycle number) effect on corrosion performance of synthesized PNEA films were determined in order to obtain best protection results against corrosion. The electrodeposited coatings were characterized by cyclic voltammetry (CV), Fourier Transform Infrared-Attenuated Total Reflectance (FTIR-ATR) spectroscopy and scanning electron microscopy (SEM). Redox parameters were found after electrochemical tests and results of stability tests of these films impart an electroactive behavior that is composed of both diffusion control and thin film behavior. In addition, corrosion performance of PNEA coatings were investigated in 0.1 M H2SO4 by Tafel extrapolation and electrochemical impedance spectroscopy (EIS) techniques.

We also recommend Trading Suppliers and Manufacturers of N-Ethylaniline (cas 103-69-5). Pls Click Website Link as below: cas 103-69-5 suppliers

Prev:Fabrication of poly(N-Ethylaniline (cas 103-69-5))/lignosulfonate composites and their carbon microspheres
Next:A strategy of two-step tandem catalysis towards direct N-alkylation of nitroarenes with ethanol via facile fabricated novel Co-based catalysts derived from coordination polymers)