Effect of electrolyte and monomer concentration on anticorrosive properties of poly(N-methylaniline) and poly(N-Ethylaniline (cas 103-69-5)) coated mild steel

Add time:08/19/2019    Source:sciencedirect.com

The electrosynthesis of poly(N-methylaniline) (PNMA) and poly(N-ethylaniline) (PNEA) coatings on mild steel in aqueous oxalic acid solutions was carried out by potentiodynamic synthesis technique. The effects of monomer and electrolyte concentrations on electrochemical growth of PNMA and PNEA coatings on mild steel substrates were investigated. Repassivation peak did not appear during electrosynthesis of PNMA and PNEA coatings from solutions containing 0.1 M monomer and 0.1 M electrolyte. The tests for corrosion protection of the polymer coated and uncoated mild steel substrates were done in 3% NaCl solutions by dc polarization and electrochemical impedance spectroscopy (EIS) techniques. Corrosion tests revealed that PNMA and PNEA coatings exhibited effective anti-corrosive properties. The acidity of the polymerization solution was found to influence the anticorrosive behavior of the polymer coating.

We also recommend Trading Suppliers and Manufacturers of N-Ethylaniline (cas 103-69-5). Pls Click Website Link as below: cas 103-69-5 suppliers

Prev:Poly(N-Ethylaniline (cas 103-69-5)) coatings on 304 stainless steel for corrosion protection in aqueous HCl and NaCl solutions
Next:Electrical properties of collodion/N-Ethylaniline (cas 103-69-5) membranes)