Full Length ArticleCompatibilization of acrylonitrile-butadiene-styrene terpolymer/poly(ethylene glycol-co-1,4-Cyclohexanedimethanol (cas 105-08-8) terephthalate) blend: effect on morphology, interface, mechanical properties and hydrophilicity

Add time:08/20/2019    Source:sciencedirect.com

The compatibilization of acrylonitrile-butadiene-styrene terpolymer (ABS) and poly(ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate) (PETG) blends was first investigated. Styrene-acrylonitrile-glycidyl methacrylate terpolymer (SAG) and ABS grafted with maleic anhydride (ABS-g-MAH) were selected as reactive compatibilizers for the ABS/PETG blends. The compatibilization effect was assessed by scanning electron microscope (SEM), differential scanning calorimetry (DSC) and mechanical properties. And the effect of compatibilizers on the hydrophilicity of the blends was evaluated as well. SEM observation and DSC analysis confirmed that both SAG and ABS-g-MAH compatibilizers could improve the compatibility between ABS and PETG, leading to an improvement in toughness of the blend. The possible cause for the improvement of compatibility was the reaction between compatibilizers and PETG, which could in situ turn out compatibilizers that acted as interfacial agents to enhance the interfacial interaction in the blend. Especially, the addition of SAG significantly decreased the dispersion phase size and the interface voids almost disappeared. Since the in situ reactions between the epoxy groups of SAG and the end groups (COOH or OH) of PETG generated PETG-co-SAG copolymer at the blend interface, and the cross-linking reactions proposed to take place between SAG and the PETG-co-SAG copolymer, acting as compatibilizer, could significantly increase the interfacial interaction. The addition of SAG also enhanced the stiffness of the blends. Moreover, the addition of SAG made the blend more hydrophilic, whereas the addition of ABS-g-MAH made the blend more hydrophobic. Therefore, SAG was a good compatibilizer for the ABS/PETG blends and could simultaneously provide the blends with toughening, stiffening and hydrophilic effects.

We also recommend Trading Suppliers and Manufacturers of 1,4-Cyclohexanedimethanol (cas 105-08-8). Pls Click Website Link as below: cas 105-08-8 suppliers

Prev:Alkali resistance of poly(ethylene terephthalate) (PET) and poly(ethylene glycol-co-1,4-Cyclohexanedimethanol (cas 105-08-8) terephthalate) (PETG) copolyesters: The role of composition
Next:Surface hydrophilic modification of acrylonitrile-butadiene-styrene terpolymer by poly(ethylene glycol-co-1,4-Cyclohexanedimethanol (cas 105-08-8) terephthalate): Preparation, characterization, and properties studies)