Graft copolymerization of methyl acrylate onto pullulan using ceric ammonium nitrate as initiator

Add time:08/20/2019    Source:sciencedirect.com

Water absorption resins of pullulan graft methyl acrylate (PU-g-MA) using ceric ammonium nitrate (CAN) as an initiator has been investigated under nitrogen atmosphere in aqueous medium. The percentage grafting (%PG) is favoured by increasing reaction time but is affected by higher concentration of initiator and monomer, and high temperature. Experiments showed that the optimal conditions for grafting were: [CAN] = 0.004 mol/l which was added in 1 mol/l nitric acid; [MA] = 0.0465 mol/l; reaction time; 180 min and temperature, 40 °C. The graft copolymer was analyzed by infrared spectroscopy. The water absorption capacity of the resins decreased significantly with the increase in %PG.

We also recommend Trading Suppliers and Manufacturers of ACRYLATE, AMMONIUM (cas 10604-69-0). Pls Click Website Link as below: cas 10604-69-0 suppliers

Prev:Research PaperExperimental investigation of the inerting effect of crystalline II type Ammonium Polyphosphate on explosion characteristics of micron-size Acrylates Copolymer dust
Next:Effect of ammonium-containing polyalkyl acrylate on the rheological properties of crude oils with different ratio of resins and waxes)