A tin disulfide nanosheet wrapped with interconnected carbon nanotube networks for application of lithium sulfur batteries

Add time:08/15/2019    Source:sciencedirect.com

The shuttle effect of lithium polysulfides (LiPSs) seriously affects the cycle and rate capability performances of lithium sulfur batteries (LSBs) and restricts their commercial application. In order to suppress availably the shuttle effect of LiPSs, herein a holistic design strategy for using tin disulfide nanosheet wrapped with interconnected carbon nanotube networks (SnS2@CNT) as the sulfur host and separator of LSBs is put forward. Based on the advantages of physical internment and chemistry absorption for LiPSs as well fast electron/lithium ion transport of SnS2@CNT, the LSBs with SnS2@CNT/S-SnS2@CNT release a high initial discharge specific capacity of 1375 mAh g−1 at 0.1C. After 800 cycles a high reversible specific capacity of 555 mAh g−1 can still be obtained even at a high current density of 2C. Besides, the LSBs with the high sulfur loading of 4.8 mg cm−2 can exhibit a reversible areal capacity of 4.5 mAh cm−2 after 50 cycles. Therefore, the design strategy provides a beneficial exploration for the commercialization of high-performance LSBs.

We also recommend Trading Suppliers and Manufacturers of Tin(IV) disulfide (cas 1315-01-1). Pls Click Website Link as below: cas 1315-01-1 suppliers

Prev:The effect of structural and optical properties on the photocatalytic efficiency of Zinc Sulphide nanoparticles obtained by hydro/solvothermal decomposition of Zinc N,N-diethyldithiocarbamate
Next:Fabrication of tin disulfide/graphene oxide nanoflower on flexible substrate for ultrasensitive humidity sensing with ultralow hysteresis and good reversibility)