Extracting antimony from high arsenic and gold-containing STIBNITE (cas 1317-86-8) ore using slurry electrolysis
-
Add time:08/16/2019 Source:sciencedirect.com
This study investigated the leaching and electrowinning of antimony from a complex, high arsenic and gold-containing STIBNITE (cas 1317-86-8) concentrate ore (As-Au-Sb ore) using slurry electrolysis (SE). The results indicated that the leaching efficiency of antimony was higher than 98%, and those of iron and arsenic were about 5.50% and 1.14%, respectively. An energy consumption (Ah) of 1.1 times the ‘benchmark’ value, a duration of 6 h, temperature of 60 °C, 30 g/L HCl, 5 g/L Fe, 30 g/L antimony, and an anodic current density of 80 A/m2 were found to be the optimal experimental conditions. The SE selectively leached antimony, while gold and arsenic were retained in the residue as a raw material for further gold extraction. The antimony content in the cathode antimony was >98%, and arsenic content was less than or equal to 0.21%. The As-Au-Sb ore consisted of stibnite (Sb2S3), pyrite (FeS2), arsenopyrite (FeAsS), and quartz (SiO2), along with a small amount of muscovite (KAl2(AlSi3O10)(OH)2) and other gangue phases. Antimony mainly occurred in stibnite. During the SE, stibnite disappeared, leaving behind elemental sulfur. We proposed a comprehensive procedure for the separation and recovery of antimony from the As-Au-Sb ore. In this process, antimony was recovered in a single step in the form of cathode antimony (> 98%), thereby resolving the technical problem of antimony and arsenic separation and hence, preventing the contamination of plenty of arsenic soda slag and low-concentration SO2 that exists in the traditional pyrometallurgical process. The process was environmentally friendly and had advantages such as short flow and high resource utilization rate.
We also recommend Trading Suppliers and Manufacturers of STIBNITE (cas 1317-86-8). Pls Click Website Link as below: cas 1317-86-8 suppliers
Prev:Separation and purification Sb2S3 from STIBNITE (cas 1317-86-8) by vacuum distillation
Next:Activation mechanism of lead ion in the flotation of STIBNITE (cas 1317-86-8)) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- STIBNITE (cas 1317-86-8) sensitized hollow cubic TiO2 photoelectrodes for organic-inorganic heterojunction solar cells08/22/2019
- Photopromoted oxidative dissolution of STIBNITE (cas 1317-86-8)08/21/2019
- Bio-oxidation of refractory gold ores containing STIBNITE (cas 1317-86-8) and gudmundite08/20/2019
- Non-first-order Kinetics Modelling Method for STIBNITE (cas 1317-86-8) Flotation Process08/19/2019
- Effect of selected parameters on STIBNITE (cas 1317-86-8) concentrates leaching by ozone08/18/2019
- Activation mechanism of lead ion in the flotation of STIBNITE (cas 1317-86-8)08/17/2019
- Separation and purification Sb2S3 from STIBNITE (cas 1317-86-8) by vacuum distillation08/15/2019


