A fully integrated passive microfluidic Lab-on-a-Chip for real-time electrochemical detection of ammonium: Sewage applications

Add time:08/21/2019    Source:sciencedirect.com

The present work reports on the development of a new generation of Lab-on-a-chip (LOC) to perform in-situ and real-time potentiometric measurements in flowing water. The device consisted of two differentiated parts: a poly (dimethylsiloxane) (PDMS) microfluidic structure obtained by soft lithography and a fully integrated chemical sensing platform including four working microelectrodes, two reference microelectrodes and one counter microelectrode for detecting ammonium in a continuous mode. The performance of the device was evaluated following its potentiometric response when analyzing ammonium containing samples. As a key parameter, its time of response was compared to that of a commercially available electrical conductivity sensor used as reference sensor during tests in laboratory using flowing tap water and technical scale using flowing wastewater. As a result, the LOC showed a slope of 55 mV/decade, a limit of detection of 4·10−5 M and a time of full response between 10 and 12 s. It was demonstrated that the device can provide fast and reliable data at real time when immersed in a laminar flow of water. Moreover, the test of robustness showed that it was still functional after immersion in sewage for at least 15 min. Besides, the LOC reported here can be helpful for a wide variety of flowing-water applications such as aqua culture outlets control, in-situ and continuous analysis of rivers effluents and sea waters monitoring among others.

We also recommend Trading Suppliers and Manufacturers of Ammonium sebacate (cas 19402-63-2). Pls Click Website Link as below: cas 19402-63-2 suppliers

Prev:Pharmaceutical NanotechnologyPolyethylene sebacate–doxorubicin nanoparticles for hepatic targeting
Next:Effect of different nanoparticles on thermal decomposition of poly(propylene sebacate)/nanocomposites: Evaluation of mechanisms using TGA and TG–FTIR–GC/MS)