Adsorption performance and mechanism in binding of Reactive Red 4 by coke waste

Add time:08/22/2019    Source:sciencedirect.com

The protonated coke waste was used as a new type of adsorbent for the removal of Reactive Red 4. To identify the binding sites in the protonated coke waste, the waste was potentiometrically titrated. As a result, four types of functional groups were present in the waste, which was confirmed by FT-IR analysis. Among functional groups, primary amine groups (–NH2) were likely the binding sites for anionic Reactive Red 4. It was also found that sulfonate, carboxyl and phosphonate groups played a role in electrostatic interference with the binding of dye molecules. The maximum adsorption capacities of the coke waste were 70.3 ± 11.1 and 24.9 ± 1.8 mg/g at pH 1 and 2, respectively. Kinetic study showed a pseudo-first-order rate of adsorption with respect to the solution. The uptake of Reactive Red 4 was not significantly affected by the high concentration of salts. These results of adsorption performance indicate the coke waste as a potentially economical adsorbent for dye removal.

We also recommend Trading Suppliers and Manufacturers of Reactive red 218 (cas 113653-03-5). Pls Click Website Link as below: cas 113653-03-5 suppliers

Prev:Microwave-assisted extraction and membrane-based separation of biophenols from red wine lees
Next:ReviewPreparation and reactivity of hierarchical catalysts in catalytic cracking)