Research paperRemoval of 2-Butoxyethanol (cas 111-76-2) gaseous emissions by biotrickling filtration packed with polyurethane foam

Add time:08/25/2019    Source:sciencedirect.com

The removal of 2-Butoxyethanol (cas 111-76-2) from gaseous emissions was studied using two biotrickling filters (BTF1 and BTF2) packed with polyurethane foam. Two different inoculum sources were used: a pure culture of Pseudomonas sp. BOE200 (BTF1) and activated sludge from a municipal wastewater treatment plant (BTF2). The bioreactors were operated at inlet loads (ILs) of 130 and 195 g m−3 hour−1 and at an empty bed residence time (EBRT) of 12.5 s. Under an IL of ∼130 g m−3 hour−1, BTF1 presented higher elimination capacities (ECs) than BTF2, with average values of 106 ± 7 and 68 ± 8 g m−3 hour−1, respectively. However, differences in ECs between BTFs were decreased by reducing the irrigation intervals from 1 min every 12 min to 1 min every 2 hours in BTF2. Average values of EC were 111 ± 25 and 90 ± 7 g m−3 hour−1 for BTF1 and BTF2, respectively, when working at an IL of ∼195 g m−3 hour−1. Microbial analysis revealed a significant shift in the microbial community of BTF1 inoculated with Pseudomonas sp. BOE200. At the end of the experiment, the species Microbacterium sp., Chryseobacterium sp., Acinetobacter sp., Pseudomonas sp. and Mycobacterium sp. were detected. In BTF2 inoculated with activated sludge, the denaturing gradient gel electrophoresis (DGGE) technique showed a diverse microbial community including species that was able to use 2-butoxyethanol as its carbon source, such as Pseudomonas aeruginosa and Pseudomonas putida as representative species. Although BTF1 inoculated with Pseudomonas sp. BOE200 and higher gas velocity (probably greater gas/liquid mass transfer rate) showed a slight improvement in performance, the use of activated sludge as inoculum seems to be a more feasible option for the industrial application of this technology.

We also recommend Trading Suppliers and Manufacturers of 2-Butoxyethanol (cas 111-76-2). Pls Click Website Link as below: cas 111-76-2 suppliers

Prev:Studies on counterion-condensation in sodium carboxymethylcellulose- 2-Butoxyethanol (cas 111-76-2)-water ternaries using electrical conductivity
Next:Adsorption of hydraulic fracturing fluid components 2-Butoxyethanol (cas 111-76-2) and furfural onto granular activated carbon and shale rock)