Sub-micro level monitoring of beryllium ions with a novel beryllium sensor based on 2,6-diphenyl-4-benzo-9-crown-3-pyridine

Add time:09/04/2019    Source:sciencedirect.com

The 2,6-diphenyl-4-benzo-9-crown-3-pyridine (DPCP) was used as an excellent ionophore in construction of a coated graphite poly(vinyl chloride) (PVC)-based membrane sensor. The best performance was obtained with a membrane composition of 30% poly(vinyl chloride), 60% o-nitrophenyloctyl ether (NPOE), 5% 2,6-diphenyl-4-benzo-9-crown-3-pyridine and 5% sodium tetraphenyl borate (TBP). This sensor shows very good selectivity and sensitivity towards beryllium ion over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The sensor revealed a great enhancement in selectivity coefficients and sensitivity for beryllium, in comparison with the previously reported beryllium electrodes. The electrode exhibits a Nernstian behavior (with slope of 29.6 mV per decade) over a very wide concentration range (1.0×10−7 to 1.0×10−1) with a detection limit of 4.0×10−8 M (360 pg ml−1). It shows relatively fast response time, in whole concentration range (<10 s), and can be used for at least 12 weeks in the pH range of 4.5–8.0. The proposed sensor was successfully used to determination of beryllium in mineral ore.

We also recommend Trading Suppliers and Manufacturers of beryllium perchlorate (cas 13597-95-0). Pls Click Website Link as below: cas 13597-95-0 suppliers

Prev:Analytical MethodsApplication of acetylacetone chelation solid-phase extraction to GFAAS measurements of trace amounts of beryllium in livers and muscles of poultry and livestock
Next:ReviewAdvances in beryllium coordination chemistry)