The influence of various Re:Co ratios on microstructures and properties of WC-Co-Re cemented carbides
-
Add time:08/29/2019 Source:sciencedirect.com
The WC mean grain size, grains size distribution, binder phase composition and properties of four batches of WC-based cemented carbides with different Co:Re ratios varying from 0:100 to 60:40 were examined. The WC mean grain size significantly decreases, hardness and coercivity increases and magnetic moment decreases when increasing the Re:Co ratio in the binder of WC-Co-Re cemented carbides. The uniformity of the carbide microstructure is slightly reduced by increasing the amount of Re added to the Co-based binder phase. The content of hcp Co in the binder phase steadily increases when increasing the Re content in the binder from 5 to 60 wt% and the Co-Re binder containing 60 wt% Re comprises almost exclusively hcp Co.
We also recommend Trading Suppliers and Manufacturers of TUNGSTEN CARBIDE WITH COBALT BINDER (cas 12774-15-1). Pls Click Website Link as below: cas 12774-15-1 suppliers
Prev:Influence of Critical Plasma Spray Parameter on Microstructural and Tribological Characteristics of Nanostructured Tungsten Carbide-Cobalt Coatings
Next:Short communicationSynthesis of monocrystalline tungsten carbide powder in carbon saturated cobalt melt) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Recycling of tungsten carbide scrap metal: A review of recycling methods and future prospects09/02/2019
- Full Length ArticleThe influence of carbides on the microstructure, grain growth, and oxidation resistance of nanostructured carbides-strengthened cobalt-based multi-track laser-cladding layers09/01/2019
- Acrylamide route for the co-synthesis of tungsten carbide–cobalt nanopowders with additives08/31/2019
- Short communicationSynthesis of monocrystalline tungsten carbide powder in carbon saturated cobalt melt08/30/2019
- Influence of Critical Plasma Spray Parameter on Microstructural and Tribological Characteristics of Nanostructured Tungsten Carbide-Cobalt Coatings08/28/2019
- High repetition rate femtosecond laser heat accumulation and ablation thresholds in cobalt-binder and binderless tungsten carbides08/27/2019
- Sintering of tungsten carbide cermets with an iron-based ternary alloy binder: Processing and thermodynamic considerations08/26/2019
-
Health and Chemical more >
-
Related Products
- Tungsten antimonate
- Tungsten boride (W2B5)
- Tungsten boride (WB2)
- Tungsten bromide (WBr5)
- Tungsten carbide, mixed with cobalt (85%:15%)
- TUNGSTEN CARBIDE, mixed with COBALT (92%:8%)
- Tungsten carbide, mixed with cobalt and titanium (78%:14%:8%)
- Tungsten chloride oxide(WCl2O2), (T-4)- (9CI)
- Tungsten disulfide
- Tungsten fluoride oxide