Comparative study on characteristics of soot from n-Decane (cas 124-18-5) and RP-3 kerosene normal/inverse diffusion flames
-
Add time:09/28/2019 Source:sciencedirect.com
RP-3 kerosene is the most important hydrocarbon fuel used in civilian airplanes in China. Up to date, there are few experimental literatures on soot formation and oxidation of RP-3 kerosene available. In this experimental study, the evolution, nanostructure, and oxidation reactivity of the soot particles for RP-3 kerosene in normal and inverse diffusion flames, were investigated. The n-decane was selected as a base fuel for the comparison. Thermophoretic techniques followed by transmission electron microscopy were used to study the evolution of the soot particles in the different locations at the centerline and radial stream of the flames. Nanostructure, lattice parameters, and oxidation reactivity of the soot particles were examined by high-resolution transmission electron microscopy, X-ray diffraction, and thermogravimetric analysis. The results showed that the size of RP-3 kerosene flame soot particles was bigger than n-decane flame at 20 mm and 30 mm height above the burner surface for normal diffusion flame. In inverse diffusion flame, RP-3 kerosene flame had bigger soot aggregates than n-decane flame. Moreover, RP-3 kerosene flame nanostructure had larger fringe length and shorter fringe tortuosity than n-decane flame in normal and inverse diffusion flames, which reflect lesser oxidation reactivity of the RP-3 kerosene flame. X-ray diffraction spectrum and thermogravimetric curves displayed good agreements with the high-resolution transmission electron microscopy images. Finally, the nanostructure of soot particles had a strong relation to their oxidation reactivity.
We also recommend Trading Suppliers and Manufacturers of Decane (cas 124-18-5). Pls Click Website Link as below: cas 124-18-5 suppliers
Prev:Research articleThe hydroisomerization of n-Decane (cas 124-18-5) over Pd/SAPO-11 bifunctional catalysts: The effects of templates on characteristics and catalytic performances
Next:Short communicationOligomerization of 1-butene over carbon-supported CoOx and subsequent isomerization/hydroformylation to n-nonanal) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Research articleThe hydroisomerization of n-Decane (cas 124-18-5) over Pd/SAPO-11 bifunctional catalysts: The effects of templates on characteristics and catalytic performances10/01/2019
- Experimental investigation on heat transfer of n-Decane (cas 124-18-5) in a vertical square tube under supercritical pressure09/27/2019
- PρT measurements and modelling of (n-Decane (cas 124-18-5) + m-xylene) mixtures from 293.15 K to 363.15 K at pressures up to 60 MPa09/26/2019
- An investigation of the acute central nervous system effects of n-Decane (cas 124-18-5)09/25/2019
- Peculiarities of melting and crystallization of n-Decane (cas 124-18-5) in a porous glass09/24/2019
- High-pressure densities of n-Decane (cas 124-18-5)+o-xylene mixtures: Measurement and modelling09/10/2019
- Location of the general anesthetic n-Decane (cas 124-18-5) in model membranes09/09/2019
- Study of nanoconfined mixtures of Decane (cas 124-18-5) and water: Structure and dynamic☆09/08/2019


