Roasting oxidation behaviors of ReS2 and MoS2 in powdery rhenium-bearing, low-grade molybdenum concentrate
-
Add time:07/19/2019 Source:sciencedirect.com
The oxidation roasting process of molybdenum concentrate has significant advantages in industrial applications. However, utilization of low-grade mineral has many problems because it is more complex than the standard concentrate. In this study, the oxidation behaviors of powdery rhenium-bearing low-grade molybdenum concentrate were investigated through thermodynamic calculation, roasting experiments, thermogravimetric analysis, and phase analysis. The results obtained show that oxidation of MoS2 begins at 450°C, and MoO3 reacts with metal-oxide forming molybdate at 600°C. Finally, MoO3 can be dissolved in ammonia with a maximum content of approximately 80%. The volatile speed of Re was considerably slower than the oxidation speed of MoS2 because the nonvolatile products ReO2 and ReO3 were generated in reactions among MoS2, SO2, and Re2O7. The final volatilization rate of Re was almost 70%. This study determined the problems related to the roasting of low-grade molybdenum concentrate, which lays the scientific foundations for subsequent enhancement of molybdenum and rhenium extraction.
We also recommend Trading Suppliers and Manufacturers of Ammonium molybdenum oxide (cas 11098-84-3). Pls Click Website Link as below: cas 11098-84-3 suppliers
Prev:In-situ synthesis of coupled molybdenum carbide and molybdenum nitride as electrocatalyst for hydrogen evolution reaction
Next:Recovery of molybdenum and rhenium in scrub liquors of fumes and dusts from roasting molybdenite concentrates) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Polynuclear oxomolybdates(VI): Products of inadvertent oxidation of molybdenum(V) species07/25/2019
- Facile hot spots assembly on molybdenum oxide nanosheets via in situ decoration with gold nanoparticles07/24/2019
- Deposition of molybdenum oxide in nanoporous titanium oxide template – modified with – composition, electrical and optical properties07/23/2019
- A facile and reliable route to prepare highly dispersive ammonium dimolybdate uniform crystals from commercial molybdenum oxide07/22/2019
- Molybdenum-based two-dimensional materials: synthesis, dispersion, exfoliation and thin film deposition07/20/2019
- Recovery of molybdenum and rhenium in scrub liquors of fumes and dusts from roasting molybdenite concentrates07/21/2019
- In-situ synthesis of coupled molybdenum carbide and molybdenum nitride as electrocatalyst for hydrogen evolution reaction07/18/2019
- Study on removal of molybdenum from ammonium tungstate solutions using solvent extraction with quaternary ammonium salt extractant07/17/2019
- Tribological assessment of partially sulfidated molybdenum oxide07/16/2019
-
Health and Chemical more >
-
Related Products
- Ammonium (-)-3-bromo-8-camphorsulfonate
- Ammonium (S)-5-((4-amino-4-carboxy-1-oxobutyl)amino)-2-nitrobenzoate
- Ammonium 1-pyrrolidinedithiocarbamate
- Ammonium 2,4-dichlorophenoxyacetate
- Ammonium 2-hydroxyethanesulphonate
- Ammonium 4-nitrobenzoate dihydrate
- Ammonium acetate
- Ammonium adipate
- Ammonium alginate
- Ammonium azide


