Adsorption of reactive blue 21 and reactive red 141 from aqueous solutions onto hydrotalcite

Add time:07/16/2019    Source:sciencedirect.com

The adsorption potential of hydrotalcite (HT) for reactive blue 21 (RB-21) and reactive red 141 (RR-141) in aqueous solutions has been investigated by batch technique.HT was characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), FT-IR spectroscopy (FT-IR), zeta potential and scanning electron microscopic (SEM) techniques. Adsorption studies were carried out as a function of various parameters like pH, adsorbent dose, co-existing anions, time of contact and initial dye concentration. The isotherm parameters of both the dyes were found to be in good agreement with Langmuir and Freundlich models. The adsorption capacity of HT for RB-21 and RR-141 was found to be 266.7 mg/g and 320.5 mg/g respectively at an optimum pH of 2.0. The adsorption of RB-21 resulted in reconstruction of HT as indicated by XRD analysis. Both RB-21 and RR-141 could be effectively desorbed using 0.1 N Na2CO3 and HT could be reused upto three adsorption-desorption cycles

We also recommend Trading Suppliers and Manufacturers of Reactive Red 21 (cas 11099-79-9). Pls Click Website Link as below: cas 11099-79-9 suppliers

Prev:The synergistic effect of dilute alloying and nanostructuring of copper on the improvement of mechanical and tribological response
Next:Equilibrium, kinetics and thermodynamic study on adsorption of reactive blue-21 and reactive red-141 by chitosan-organically modified nanoclay (Cloisite 30B) nano-bio composite)