10175-31-2Relevant academic research and scientific papers
A high throughput synthesis of N,N-dimethyl tertiary amines
Bhattacharyya, Sukanta
, p. 2001 - 2008 (2000)
N,N-dimethyl tertiary amines are obtained in high yields by titanium(IV) isopropoxide mediated reductive amination of carbonyl compounds with a commercially available methanol solution of dimethylamine.
A Novel Route to Synthesize N,N-Dimethyl Arylmethylamines from Aryl Aldehydes, Hexamethylenetetramine and Hydrogen?
Ke, Zhengang,Yu, Bo,Wu, Yunyan,Zhao, Yanfei,Yang, Peng,Guo, Shien,Liu, Zhimin
, p. 842 - 846 (2020)
Developing simple and green routes to access valuable chemicals is of significance. Herein, we present a green and novel route to synthesize N,N-dimethyl arylmethylamines (DAMAs) from hexamethylenetetramine (HMTA) and aryl aldehydes in the presence of hydrogen, and a series of DAMAs can be obtained in good yields. This approach opens the precedent for HMTA as N,N-dimethylamine source to synthesize chemicals with N,N-dimethylamine group, which has promising applications for N-containing chemicals synthesis.
Lewis Acid-Catalyzed Reductive Amination of Aldehydes and Ketones with N,N-Dimethylformamide as Dimethylamino Source, Reductant and Solvent
Yang, Luo,Lin, Jie,Kang, Lei,Zhou, Wang,Ma, Da-You
, p. 485 - 490 (2018)
A practical zinc acetate dihydrate-catalyzed reductive amination of various carbonyl compounds with N,N-dimethylformamide (DMF) as dimethylamino (Me2N) source, reductant and solvent has been developed. This reaction shows broad substrate scope,
Heterogeneous Catalyzed Chemoselective Reductive Amination of Halogenated Aromatic Aldehydes
Dumoleijn, Kim N. R.,Villa, Alberto,Marelli, Marcello,Prati, Laura,Moonen, Kristof,Stevens, Christian V.
, p. 3021 - 3026 (2021)
The chemoselective conversion of a specific functional group in a multifunctional substrate is of great importance in the chemical industry to obtain cost efficient, sustainable and waste free processes. This work focuses on the chemoselective amination of halogenated aromatic aldehydes with dimethyl amine towards halogenated aromatic amines, a raw material used in the production of for example agrochemical active ingredients. It was found that by combining palladium, a metal known for dehalogenation reactions, and copper, known for its direct hydrogenation of aldehydes to alcohols, in one heterogeneous bimetallic catalyst, a synergistic effect is obtained. By depositing copper onto a palladium on carbon catalyst with a Cu/Pd ratio of at least 1 : 1, the yield could be increased from 66 % (Pd/C) to 98 % (PdCu/C). Moreover, this highly active and stable catalyst also showed suppressed dehalogenation side-reactions in several other chemical conversions such as hydrogenation of nitro functional groups and hydrogenation of aldehydes.
Selective catalytic amination of halogenated aldehydes with calcined palladium catalysts
Villa, Alberto,Dumoleijn, Kim,Evangelisti, Claudio,Moonen, Kristof,Prati, Laura
, p. 15202 - 15206 (2018)
This work focuses on understanding the influence of the conditions used in the calcination step of palladium catalysts on the performance of this catalyst in the reductive amination of halogen-containing substrates. The results show that increasing the calcination temperatures (from 100 °C to 400 °C) has a detrimental effect on catalytic activity but a strong positive effect on the selectivity (from 45 to 96%), avoiding the undesired dehalogenation reaction. TEM investigation showed that the reason for the different selectivity can be addressed to different Pd mean particles size and particle size distribution. In particular, larger Pd particles obtained at the highest calcination temperature (400 °C) showed the best selectivity to halogenated benzylamines (96%), with a good stability in terms of both activity and selectivity as confirmed by performing recycling tests.
Simplified preparation of a graphene-co-shelled Ni/NiO@C nano-catalyst and its application in theN-dimethylation synthesis of amines under mild conditions
Liu, Jianguo,Ma, Longlong,Song, Yanpei,Zhang, Mingyue,Zhuang, Xiuzheng
supporting information, p. 4604 - 4617 (2021/06/30)
The development of Earth-abundant, reusable and non-toxic heterogeneous catalysts to be applied in the pharmaceutical industry for bio-active relevant compound synthesis remains an important goal of general chemical research.N-methylated compounds, as one of the most essential bioactive compounds, have been widely used in the fine and bulk chemical industries for the production of high-value chemicals. Herein, an environmentally friendly and simplified method for the preparation of graphene encapsulated Ni/NiO nanoalloy catalysts (Ni/NiO@C) was developed for the first time, for the highly selective synthesis ofN-methylated compounds using various functional amines and aldehydes under easy to handle, and industrially applicable conditions. A large number of primary and secondary amines (more than 70 examples) could be converted to the correspondingN,N-dimethylamines with the participation of different functional aldehydes, with an average yield of over 95%. A gram-scale synthesis also demonstrated a similar yield when compared with the benchmark test. In addition, it was further proved that the catalyst could easily be recycled because of its intrinsic magnetism and reused up to 10 times without losing its activity and selectivity. Also, for the first time, the tandem synthesis ofN,N-dimethylamine products in a one-pot process, using only a single earth-abundant metal catalyst, whose activity and selectivity were more than 99% and 94%, respectively, for all tested substrates, was developed. Overall, the advantages of this newly developed method include operational simplicity, high stability, easy recyclability, cost-effectiveness of the catalyst, and good functional group compatibility for the synthesis ofN-methylation products as well as the industrially applicable tandem synthesis process.
Palladium-Catalyzed Reductive Aminocarbonylation of Benzylammonium Triflates with o-Nitrobenzaldehydes for the Synthesis of 3-Arylquinolin-2(1 H)-ones
Liu, Yongzhu,Qi, Xinxin,Wu, Xiao-Feng
, p. 13824 - 13832 (2021/10/12)
A palladium-catalyzed straightforward procedure for the synthesis of 3-arylquinolin-2(1H)-ones has been developed. The synthesis proceeds through a palladium-catalyzed reductive aminocarbonylation reaction of benzylic ammonium triflates with o-nitrobenzaldehydes, and a wide range of 3-arylquinolin-2(1H)-ones was obtained in moderate to good yields with very good functional group compatibility.
Cu2O-catalyzed C–S coupling of quaternary ammonium salts and sodium alkane-/arene-sulfinates
Chen, Hongyi,Huang, Youming,Zeng, Qingle,Zheng, Wenting
supporting information, (2020/08/28)
A new protocol for the synthesis of (enantioenriched) benzylic sulfones via the Cu2O-catalyzed C–S bond cross coupling of alkane-/arene-sulfinates and (enantioenriched) benzylic quaternary ammonium salts has been developed. The product benzylic sulfones were obtained in good to high yields (75–96%). Chiral arylmethyl sulfones with high enantiomeric excess (90–94% ee) were also synthesized in the presence of Cu2O and 1,1′-bis-(diphenylphosphino)ferrocene (dppf).
Electrochemical Dehydrogenative Imidation of N-Methyl-Substituted Benzylamines with Phthalimides for the Direct Synthesis of Phthalimide-Protected gem-Diamines
Lian, Fei,Sun, Caocao,Xu, Kun,Zeng, Chengchu
supporting information, p. 156 - 159 (2019/01/11)
A general and green electrochemical dehydrogenative method for the imidation of N-methyl benzylamines with phthalimides with excellent regioselectivities is reported for the first time. This operationally simple method offers a valuable tool to obtain str
Hydrogenation and Reductive Amination of Aldehydes using Triphos Ruthenium Catalysts
Christie, Francesca,Zanotti-Gerosa, Antonio,Grainger, Damian
, p. 1012 - 1018 (2018/01/27)
An air-stable and readily accessible ruthenium dihydride complex catalyses aldehyde hydrogenation under neutral conditions. A high activity has been shown in a number of examples, and solvent-free conditions are also applicable, which favours industrial-scale applications. The catalyst has also been demonstrated to be active at low catalyst loadings for the reductive amination of aldehydes under mildly acidic conditions. A number of examples of chemoselectivity challenges are also presented in which the catalyst does not reduce carbon?halogen groups, alkene or ketone functionality. The advantage of using the pre-formed complex, Triphos-Ru(CO)H2 (1), over in situ formed catalysts from Triphos and Ru(acac)3 (acac=acetylacetonate) is also shown in terms of both chemoselectivity and activity, in particular this can be seen if low reaction temperatures are used.
