40515-89-7Relevant articles and documents
Eco-friendly preparation of ultrathin biomass-derived Ni3S2-doped carbon nanosheets for selective hydrogenolysis of lignin model compounds in the absence of hydrogen
Chen, Changzhou,Jiang, Jianchun,Li, Jing,Liu, Peng,Wu, Dichao,Xia, Haihong,Zhou, Minghao
, p. 3090 - 3103 (2021/05/07)
Lignin is an abundant source of aromatics, and the depolymerization of lignin provides significant potential for producing high-value chemicals. Selective hydrogenolysis of the C-O ether bond in lignin is an important strategy for the production of fuels and chemical feedstocks. In our study, catalytic hydrogenolysis of lignin model compounds (β-O-4, α-O-4 and 4-O-5 model compounds) over Ni3S2-CS catalysts was investigated. Hence, an array of 2D carbon nanostructure Ni3S2-CSs-X-Yderived catalysts were produced using different compositions at different temperatures (X= 0 mg, 0.2 mg, 0.4 mg, 0.6 mg, and 0.8 mg; Y = 600 °C, 700 °C, 800 °C, and 900 °C) were prepared and applied for hydrogenolysis of lignin model compounds and depolymerization of alkaline lignin. The highest conversion of lignin model compounds (β-O-4 model compound) was up to 100% and the yield of the obtained corresponding ethylbenzene and phenol could achieve 92% and 86%, respectively, over the optimal Ni3S2-CSs-0.4-700 catalyst in iPrOH at 260 °C without external H2. The 2D carbon nanostructure catalysts performed a good dispersion on the surface of the carbon nanosheets, which facilitated the cleavage of the lignin ether bonds. The physicochemical characterization studies were carried out by means of XRD, SEM, TEM, H2-TPR, NH3-TPD, Raman and XPS analyses. Based on the optimal reaction conditions (260 °C, 4 h, 2.0 MPa N2), various model compounds (β-O-4, α-O-4 and 4-O-5 model compounds) could also be effectively hydrotreated to produce the corresponding aromatic products. Furthermore, the optimal Ni3S2-CSs-0.4-700 catalyst could be carried out in the next five consecutive cycle experiments with a slight decrease in the transformation of lignin model compounds.
Environmentally-friendly and sustainable synthesis of bimetallic NiCo-based carbon nanosheets for catalytic cleavage of lignin dimers
Chen, Changzhou,Jiang, Jianchun,Liu, Peng,Ren, Jurong,Wu, Dichao,Xia, Haihong,Zhou, Minghao
, (2021/08/05)
This paper reports on a study of 2D metal-based (Ni-, NiCo-) carbon nanosheet (CNs) material that were synthesized via a template method and the synthetic materials showed an ultra-thin lamellar structure. The structures were characterized using different analytical methods including XRD, SEM, EDX, TEM, XPS, NH3-TPD. The synthesized NiCo-based CNs are ultrathin sheet shape with good crystallinity and uniform particle distributions. In the synthetic route of NiCo-based CNs, sodium lignosulfonate was employed as carbon and sulfur source and boric acid was used as 2D template to form a perfect lamellar structure. It manifested an environmentally-friendly and sustainable concept for preparation of the 2D NiCo-CNs. Although simple CNs was a poor catalyst, after Ni and NiCo doping, it became highly active in cleavage of β-O-4 ether bond in lignin through a catalytic transfer hydrogenation process and led to very high product yields.
Multiple Mechanisms Mapped in Aryl Alkyl Ether Cleavage via Aqueous Electrocatalytic Hydrogenation over Skeletal Nickel
Hegg, Eric L.,Jackson, James E.,Klinger, Grace E.,Saffron, Christopher M.,Zhou, Yuting
, p. 4037 - 4050 (2020/03/10)
We present here detailed mechanistic studies of electrocatalytic hydrogenation (ECH) in aqueous solution over skeletal nickel cathodes to probe the various paths of reductive catalytic C-O bond cleavage among functionalized aryl ethers relevant to energy science. Heterogeneous catalytic hydrogenolysis of aryl ethers is important both in hydrodeoxygenation of fossil fuels and in upgrading of lignin from biomass. The presence or absence of simple functionalities such as carbonyl, hydroxyl, methyl, or methoxyl groups is known to cause dramatic shifts in reactivity and cleavage selectivity between sp3 C-O and sp2 C-O bonds. Specifically, reported hydrogenolysis studies with Ni and other catalysts have hinted at different cleavage mechanisms for the C-O ether bonds in α-keto and α-hydroxy β-O-4 type aryl ether linkages of lignin. Our new rate, selectivity, and isotopic labeling results from ECH reactions confirm that these aryl ethers undergo C-O cleavage via distinct paths. For the simple 2-phenoxy-1-phenylethane or its alcohol congener, 2-phenoxy-1-phenylethanol, the benzylic site is activated via Ni C-H insertion, followed by beta elimination of the phenoxide leaving group. But in the case of the ketone, 2-phenoxyacetophenone, the polarized carbonyl πsystem apparently binds directly with the electron rich Ni cathode surface without breaking the aromaticity of the neighboring phenyl ring, leading to rapid cleavage. Substituent steric and electronic perturbations across a broad range of β-O-4 type ethers create a hierarchy of cleavage rates that supports these mechanistic ideas while offering guidance to allow rational design of the catalytic method. On the basis of the new insights, the usage of cosolvent acetone is shown to enable control of product selectivity.
Photocatalytic transfer hydrogenolysis of aromatic ketones using alcohols
Gao, Zhuyan,Han, Jianyu,Hong, Feng,Lei, Lijun,Li, Hongji,Liu, Huifang,Luo, Nengchao,Wang, Feng
, p. 3802 - 3808 (2020/07/09)
A mild method of photocatalytic deoxygenation of aromatic ketones to alkyl arenes was developed, which utilized alcohols as green hydrogen donors. No hydrogen evolution during this transformation suggested a mechanism of direct hydrogen transfer from alcohols. Control experiments with additives indicated the role of acid in transfer hydrogenolysis, and catalyst characterization confirmed a larger number of Lewis acidic sites on the optimal Pd/TiO2 photocatalyst. Hence, a combination of hydrogen transfer sites and acidic sites may be responsible for efficient deoxygenation without additives. The photocatalyst showed reusability and achieved selective reduction in a variety of aromatic ketones.
Cleavage of lignin C-O bonds over a heterogeneous rhenium catalyst through hydrogen transfer reactions
Zhang, Bo,Qi, Zaojuan,Li, Xinxin,Ji, Jianwei,Zhang, Leilei,Wang, Hua,Liu, Xiaoyan,Li, Changzhi
supporting information, p. 5556 - 5564 (2019/10/28)
Hydrogenolysis is one of the most popular strategies applied in the depolymerization of lignin for the production of aromatic chemicals. Currently, this strategy is mainly conducted under high hydrogen pressure, which can pose safety risks and is not sustainable and economical. Herein, we reported that heterogeneous rhenium oxide supported on active carbon (ReOx/AC) exhibited excellent activity in the selective cleavage of lignin C-O bonds in isopropanol. High yields of monophenols (up to 99.0%) from various lignin model compounds and aromatic liquid oils (>50%) from lignin feedstock were obtained under mild conditions in the absence of H2. The characterization of the catalyst by X-ray absorption fine structure, X-ray photoelectron spectroscopy and H2-temperature-programed reduction suggested that the activity of ReOx/AC could be attributed to the presence of ReIV-VI. The interaction between the surface oxygen groups of the active carbon and rhenium oxide could also play an important role in the cleavage of the C-O bonds. Notably, an ReOx/AC-catalyzed C-O bond cleavage pathway beyond a typical deoxydehydration mechanism was disclosed. More importantly, 2D-HSQC-NMR and GPC characterizations showed that ReOx/AC exhibited high activity not only in β-O-4 cleavage, but also in the deconstruction of more resistant β-5 and β-β linkages in lignin without destroying the aromatic ring. This study paves the way for the development of rhenium-based catalysts for the controlled reductive valorization of realistic lignin materials through a hydrogen transfer pathway.
Catalytic cleavage of the Β-O-4 aryl ether bonds of lignin model compounds by Ru/C catalyst
Hossain, Md Anwar,Phung, Thanh Khoa,Rahaman, Mohammad Shahinur,Tulaphol, Sarttrawut,Jasinski, Jacek B.,Sathitsuksanoh, Noppadon
, (2019/06/27)
Lignin is a potential renewable feedstock for aromatic compounds. Lignin glues cellulose and hemicellulose together in a rigid structure that protects plants from weather, insects, and disease. This rigidity also poses a barrier to cleavage of lignin into
Selective Cleavage of C?O Bonds in Lignin Catalyzed by Rhenium(VII) Oxide (Re2O7)
Qi, Zaojuan,Zhang, Bo,Ji, Jianwei,Li, Xinxin,Dai, Tao,Guo, Haiwei,Wang, Aiqin,Lu, Lican,Li, Changzhi
, p. 500 - 505 (2018/03/27)
The selective cleavage of C?O bonds in typical model lignin β-O-4 compounds and deconstruction of a realistic lignin feedstock catalyzed by Re2O7 is described. High yields of C?O cleavage products (up to 97.8 %) from model compounds and oils (76.3 %) from organosolv pinewood lignin were obtained under mild conditions. Evidence for the pathway of this catalytic process is also provided.
Selective reductive cleavage of C–O bond in lignin model compounds over nitrogen-doped carbon-supported iron catalysts
Li, Jiang,Sun, Hui,Liu, Jia-xing,Zhang, Jun-jie,Li, Zhen-xing,Fu, Yao
, p. 36 - 45 (2018/04/10)
Lignin has recently attracted much attention as a promising resource to produce fuels and aromatic chemicals. The selective cleavage of C–O bond while preserving the aromatic nature has become one of the major challenges in the catalytic valorization of lignin to aromatic chemicals. In this work, we report that the selective reductive cleavage of C–O bond in lignin model compounds can be successfully achieved through heterogeneous iron catalysis. The hydrogenolysis of α-O-4 model linkage shows that the iron catalyst prepared by the simultaneous pyrolysis of iron acetate and 1,10-phenanthroline on activated carbon at 800 °C is the most active iron catalyst, affording phenol and toluene with yields of 95% and 90%, respectively. This aromatics selectivity is found to be much higher than that obtained over noble metal catalysts. The presence of N?Fe species as the active center of heterogeneous iron catalyst was confirmed by various technologies especially XPS and H2-TPR. For the β-O-4 model linkage, the vicinal –OH group was essential for the iron-catalyzed hydrogenolysis of ether linkage. The oxidation of the α-carbon in the β-O-4 model compounds can significantly decrease the bond dissociation energy of ether linkage, giving depolymerization products in moderate to excellent yields.
Ni/HZSM-5 catalyst preparation by deposition-precipitation. Part 2. Catalytic hydrodeoxygenation reactions of lignin model compounds in organic and aqueous systems
Barton,Carrier,Segura,Fierro,Park,Lamb,Escalona,Peretti
, p. 294 - 309 (2018/06/26)
Nickel metal supported on HZSM-5 (zeolite) is a promising catalyst for lignin depolymerization. In this work, the ability of catalysts prepared via deposition-precipitation (DP) to perform hydrodeoxygenation (HDO) on two lignin model compounds in organic and aqueous solvents was evaluated; guaiacol in dodecane and 2-phenoxy-1-phenylethanol (PPE) in aqueous solutions. All Ni/HZSM-5 catalysts were capable of guaiacol HDO into cyclohexane at 523 K. The role of the HZSM-5 acid sites was confirmed by comparison with Ni/SiO2 (inert support) which exhibited incomplete deoxygenation of guaiacol due to the inability to perform the cyclohexanol dehydration step. The catalyst prepared with 15 wt% Ni, a DP time of 16 h, and a calcination temperature of 673 K (Ni(15)/HZSM-5 DP16_Cal673), performed the guaiacol conversion with the greatest selectivity towards HDO products, with an intrinsic rate ratio (HDO rate to conversion rate) of 0.31, and 90% selectivity to cyclohexane. Catalytic activity and selectivity of Ni/HZSM-5 (15 wt%) in aqueous environments (water and 0.1 M NaOH solution) was confirmed using PPE reactions at 523 K. After 30 min reaction time in water, Ni/HZSM-5 exhibited ～100% conversion of PPE, and good yield of the desired products; ethylbenzene and phenol (～35% and 23% of initial carbon, respectively). Ni/HZSM-5 in NaOH solution resulted in significantly higher ring saturation compared to the Ni/HZSM-5 in water or the NaOH solution control.
Metal-Free I2-Catalyzed Highly Selective Dehydrogenative Coupling of Alcohols and Cyclohexenones
Liang, Yu-Feng,Yuan, Yizhi,Shen, Tao,Song, Song,Jiao, Ning
, p. 233 - 240 (2018/02/19)
The I2 catalyzed highly selective oxidative condensation of cyclohexenones and alcohols for the synthesis of aryl alkyl ethers has been described. DMSO is employed as the mild terminal oxidant. This novel methodology offers a metal-free reaction condition, operational simplicity and broad substrate scope to afford valuable products from inexpensive reagents. Various meta-substituted aromatic ethers which are hardly synthesized from the reported methods requiring meta-substituted phenols, are efficiently prepared by the present protocol.
