87-69-4Relevant articles and documents
Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass
Deng, Weiping,Yan, Longfei,Wang, Binju,Zhang, Qihui,Song, Haiyan,Wang, Shanshan,Zhang, Qinghong,Wang, Ye
supporting information, p. 4712 - 4719 (2021/01/20)
Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.
A cobalt-substituted Keggin-Type polyoxometalate for catalysis of oxidative aromatic cracking reactions in water
Hong, Dachao,Kitagawa, Yasutaka,Kon, Yoshihiro,Shimoyama, Yoshihiro,Tamura, Satoru
, p. 8042 - 8048 (2020/12/28)
Efficient detoxification of harmful benzene rings into useful carboxylic acids in water is indispensable for achieving a clean water environment. We report herein that oxidative aromatic cracking (OAC) reactions in water were achieved using a catalytic system with a cobalt-substituted Keggin-Type polyoxometalate (Co-POM) as a catalyst, an Oxone monopersulfate compound as a sacrificial oxidant and sodium bicarbonate as an additive under mild conditions. Sodium bicarbonate plays a crucial role in the selective OAC reactions by Co-POM using ethylbenzenesulfonate as a model substrate. The reactive species was characterized to be a cobalt(iii)-oxyl species based on 31P NMR, UV-vis spectroscopic, kinetic, and theoretical analyses. The electrophilicity of the cobalt(iii)-oxyl species was demonstrated by a linear relationship with a negative slope in the Hammett plots of initial rates obtained from the OAC reactions of m-xylenesulfonate derivatives. Besides, we have verified the degradation pathway of the OAC reactions using benzene as a model substrate in the catalytic system. The degradation was initiated by an electrophilic attack of the cobalt(iii)-oxyl species on benzene to yield phenol followed by producing catechol, muconic acid, maleic/fumaric acid, tartaric acid derivatives and formic acid on the basis of 1H NMR spectroscopic analysis.
Bimetallic AuPt/TiO2Catalysts for Direct Oxidation of Glucose and Gluconic Acid to Tartaric Acid in the Presence of Molecular O2
Ding, Jie,Jin, Xin,Lai, Linyi,Liu, Mengyuan,Sun, Yu,Wang, Jinyao,Xia, Qi,Yan, Hao,Yang, Chaohe,Zhang, Guangyu,Zhang, Wenxiang
, p. 10932 - 10945 (2020/11/23)
Tartaric acid is an important industrial building block in the food and polymer industry. However, green manufacture of tartaric acid remains a grand challenge in this area. To date, chemical synthesis from nitric acid-facilitated glucose oxidation leads to only a one-pot aqueous-phase oxidation of glucose and gluconic acid using bimetallic AuPt/TiO2 catalysts in the presence of molecular O2, with ～50% yield toward tartaric acid at 110 °C and 2 MPa. Structural characterization and density functional theory (DFT) calculation reveal that the lattice mismatch between fcc Pt and bcc Au induces the formation of twinned boundaries in nanoclusters and Jahn-Teller distortion in an electronic field. Such structural and electronic reconfiguration leads to enhanced σ-activation of the C-H bond competing with π-πelectronic sharing of the C═O bond on the catalyst surface. As a result, both C-H (oxidation) and C-C (decarboxylation) bond cleavage reactions synergistically occur on the surface of bimetallic AuPt/TiO2 catalysts. Therefore, glucose and gluconic acid can be efficiently transformed into tartaric acid in a base-free medium. Lattice distortion-enhanced reconfiguration of the electronic field in Pt-based bimetallic nanocatalysts can be utilized in many other energy and environmental fields for catalyzing synergistic oxidation reactions.
Electrochemical oxidation of amoxicillin on carbon nanotubes and carbon nanotube supported metal modified electrodes
Ferreira, Marta,Kuzniarska-Biernacka, Iwona,Fonseca, António M.,Neves, Isabel C.,Soares, Olívia S.G.P.,Pereira, Manuel F.R.,Figueiredo, José L.,Parpot, Pier
, p. 322 - 331 (2019/07/10)
The electrolysis of amoxicillin (AMX) was carried out on CNT, Pt/CNT and Ru/CNT modified electrodes based on Carbon Toray in 0.1 M NaOH, 0.1 M NaCl and 0.1 M Na2CO3/NaHCO3 buffer (pH 10) media with the aim of studying the significance of two factors, electrode material and pH, on the oxidative degradation and mineralization of AMX. For this purpose, the electrolysis products were identified by HPLC-MS and GC–MS, and quantified by HPLC-UV-RID and IC. The highest carbon mineralization efficiency, corresponding to 30% of the oxidized AMX, was found for Pt/CNT modified electrode in carbonate buffer medium. Regarding to the AMX conversion, the results show that the effect of pH is higher than that of the electrode material. Principal component analysis allowed to determine the experimental parameters vs. product distribution relationship and to elucidate the oxidation pathways for the studied electrodes. The results show that the hydroxylation of the aromatic ring and the nitrogen atom play an important role on the efficient degradation of AMX.
Quantitative Determination of Pt- Catalyzed d -Glucose Oxidation Products Using 2D NMR
Armstrong,Hirayama,Knight,Hutchings
, p. 325 - 335 (2019/01/04)
Quantitative correlative 1H-13C NMR has long been discussed as a potential method for quantifying the components of complex reaction mixtures. Here, we show that quantitative HMBC NMR can be applied to understand the complexity of the catalytic oxidation of glucose to glucaric acid, which is a promising bio-derived precursor to adipic acid, under aqueous aerobic conditions. It is shown through 2D NMR analysis that the product streams of this increasingly studied reaction contain lactone and dilactone derivatives of acid products, including glucaric acid, which are not observable/quantifiable using traditional chromatographic techniques. At 98% glucose conversion, total C6 lactone yield reaches 44%. Furthermore, a study of catalyst stability shows that all Pt catalysts undergo product-mediated chemical leaching. Through catalyst development studies, it is shown that sequestration of leached Pt can be achieved through use of carbon supports.
Decorated single-enantiomer phosphoramide-based silica/magnetic nanocomposites for direct enantioseparation
Karimi Ahmadabad, Fatemeh,Pourayoubi, Mehrdad,Bakhshi, Hadi
, p. 27147 - 27156 (2019/09/12)
The nano-composites Fe3O4SiO2(-O3Si[(CH2)3NH])P(O)(NH-R(+)CH(CH3)(C6H5))2 (Fe3O4SiO2PTA(+)) and Fe3O4SiO2(-O3Si[(CH2)3NH])P(O)(NH-S(-)CH(CH3)(C6H5))2 (Fe3O4SiO2PTA(-)) were prepared and used for the chiral separation of five racemic mixtures (PTA = phosphoric triamide). The separation results show chiral recognition ability of these materials with respect to racemates belonging to different families of compounds (amine, acid, and amino-acid), which show their feasibility to be potential adsorbents in chiral separation. The nano-composites were characterized by FTIR, TEM, SEM, EDX, XRD, and VSM. The VSM curves of nano-composites indicate their superparamagnetic property, which is stable after their use in the separation process. Fe3O4, Fe3O4SiO2, Fe3O4SiO2PTA(+) and Fe3O4SiO2PTA(-) are regularly spherical with uniform shape and the average sizes of 17-20, 18-23, 36-47 and 43-52 nm, respectively.
Aerobic oxidation of xylose to xylaric acid in water over pt catalysts
Sadula, Sunitha,Saha, Basudeb
, p. 2124 - 2129 (2018/10/20)
Energy-efficient catalytic conversion of biomass intermediates to functional chemicals can make bio-products viable. Herein, we report an efficient and low temperature aerobic oxidation of xylose to xylaric acid, a promising bio-based chemical for the production of glutaric acid, over commercial catalysts in water. Among several heterogeneous catalysts investigated, Pt/ C exhibits the best activity. Systematic variation of reaction parameters in the pH range of 2.5 to 10 suggests that the reaction is fast at higher temperatures but high C C scission of intermediate C5-oxidized products to low carbon carboxylic acids undermines xylaric acid selectivity. The C C cleavage is also high in basic solution. The oxidation at neutral pH and 60 8C achieves the highest xylaric acid yield (64 %). O2 pressure and Pt amount have significant influence on the reactivity. Decar-boxylation of short chain carboxylic acids results in formation of CO2, causing some carbon loss; however, such decarboxyla-tion is slow in the presence of xylose. The catalyst retained comparable activity, in terms of product selectivity, after five cycles with no sign of Pt leaching.
Rearrangements and Tautomeric Transformations of Heterocyclic Compounds in Homogeneous Reaction Systems Furfural–Н2О2–Solvent
Badovskaya,Poskonin
, p. 1568 - 1579 (2018/11/10)
General information on the reactions of furfurals with hydrogen peroxide is given. We have discussed the Baeyer–Villiger rearrangement of furan 2-hydroxyhydroperoxides and tautomeric transformations with proton transfer of 2-hydroxyfuran and β-formylacrylic acid formed in a homogeneous reaction system furfural–Н2О2–solvent under the catalysis with the formed acids. The factors affecting these rearrangements and tautomeric transformations as well as their specificity in comparison with benzene type compounds, and the pathway of the reactions of furan aldehydes with Н2О2 in water have been analyzed. Ketoenol tautomerism of cyclic hemiacetal form of β-formylacrylic acid leading to its transformation into succinic anhydride has been described for the first time.
Synthetic method of 2,3-dihydrobutanedioic acid drug intermediate
-
Paragraph 0017-0019; 0021-0023; 0024-0027, (2018/07/30)
The invention discloses a synthetic method of a 2,3-dihydrobutanedioic acid drug intermediate. The synthetic method comprises the following steps: adding 1,4-dibromo-2,3-dimethoxy-butanedial and a heptane solution into a reaction container, controlling the stirring speed to be 170 to 190 rpm, increasing the temperature to be 40 to 46 DEG C, adding a water solution and dimethyl sulfoxide, adding adioctyl sebacate solution within 20 to 40 min in batches, and continuously reacting for 50 to 80 min; increasing the temperature to be 55 to 62 DEG C, adding a potassium bromide solution and zinc acetate powder, continuously reacting for 2 to 3 h, reducing the temperature to be 10 to 16 DEG C, leaving to stand for 30 to 50 min, adding a sodium nitrate solution, layering the solution to separate anoil layer, washing with a 3-hexyl alcohol solution for 30 to 50 min, carrying out recrystallization in a cyclopentanecarboxylic acid solution, and carrying out dehydration by a dehydrating agent to obtain the finished product 2,3-dihydrobutanedioic acid.
Degradation of the Cellulosic Key Chromophore 5,8-Dihydroxy-[1,4]-naphthoquinone by Hydrogen Peroxide under Alkaline Conditions
Zwirchmayr, Nele Sophie,Hosoya, Takashi,Henniges, Ute,Gille, Lars,Bacher, Markus,Furtmüller, Paul,Rosenau, Thomas
, p. 11558 - 11565 (2017/11/10)
5,8-Dihydroxy-[1,4]-naphthoquinone (DHNQ) is one of the key chromophores in cellulosic materials. Its almost ubiquitous presence in cellulosic materials makes it a target molecule of the pulp and paper industry's bleaching efforts. In the presented study, DHNQ was treated with hydrogen peroxide under alkaline conditions at pH 10, resembling the conditions of industrial hydrogen peroxide bleaching (P stage). The reaction mechanism, reaction intermediates, and final degradation products were analyzed by UV/vis, NMR, GC-MS, and EPR. The degradation reaction yielded C1-C4 carboxylic acids as the final products. Highly relevant for pulp bleaching are the findings on intermediates of the reaction, as two of them, 2,5-dihydroxy-[1,4]-benzoquinone (DHBQ) and 1,4,5,8-naphthalenetetrone, are potent chromophores themselves. While DHBQ is one of the three key cellulosic chromophores and its degradation by H2O2 is well-established, the second intermediate, 1,4,5,8-naphthalenetetrone, is reported for the first time in the context of cellulose discoloration.
