Welcome to LookChem.com Sign In|Join Free
  • or
1-[(Z)-Styryl]-4-chlorobenzene is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

1657-49-4

Post Buying Request

1657-49-4 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

1657-49-4 Usage

Structure

A derivative of benzene with a chloro group and a styryl group attached to the ring.

Configuration

Trans (indicated by the (Z) in its name)

Usage

Primarily used in the synthesis of organic compounds and as a reagent in chemical reactions.

Applications

a. Production of various pharmaceuticals and specialty chemicals.
b. Potential use in the development of materials for electronic and optoelectronic applications.

Unique properties

Its structure and properties make it useful for the mentioned applications.

Check Digit Verification of cas no

The CAS Registry Mumber 1657-49-4 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,6,5 and 7 respectively; the second part has 2 digits, 4 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 1657-49:
(6*1)+(5*6)+(4*5)+(3*7)+(2*4)+(1*9)=94
94 % 10 = 4
So 1657-49-4 is a valid CAS Registry Number.

1657-49-4SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 19, 2017

Revision Date: Aug 19, 2017

1.Identification

1.1 GHS Product identifier

Product name 1-chloro-4-(2-phenylethenyl)benzene

1.2 Other means of identification

Product number -
Other names Benzene, 1-chloro-4-(2-phenylethenyl)-, (Z)-

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:1657-49-4 SDS

1657-49-4Relevant academic research and scientific papers

Z-Stereoselective semi-reduction of alkynes: Modification of the Boland protocol

Mohamed, Yasser M.A.,Hansen, Trond Vidar

, p. 3872 - 3877 (2013)

Highly Z-selective semi-reduction of alkynes has been achieved by adding TMSCl to a mixture of Zn(Cu/Ag), water, and methanol. The conjugated Z-alkenes have been prepared in high yields at ambient temperature. The formation of isomeric E-alkenes and over-reduction to alkanes were suppressed in our modified Boland reduction protocol. The methodology was extended to the preparation of Z-substituted stilbenes.

Pd/C as a highly active catalyst for Heck, Suzuki and Sonogashira reactions

Heidenreich, Roland G.,K?hler, Klaus,Krauter, Jürgen G. E.,Pietsch, J?rg

, p. 1118 - 1122 (2002)

A specially optimized air-stable Pd on activated carbon catalyst is demonstrated to be a highly active (TON up to 36,000), selective and convenient heterogeneous catalyst for CC couplings of aryl halides in Heck, Suzuki, and Sonogashira reactions. The Pd/C catalyst developed allows extremely low Pd concentrations (down to 0.0025 mol% for Heck coupling, 0.005 mol% for Suzuki coupling) and high conversions of aryl bromides within a few hours. Easy and complete Pd separation and recovery is possible.

Heterobimetallic Pd/Mn and Pd/Co complexes as efficient and stereoselective catalysts for sequential Cu-free Sonogashira coupling–alkyne semi-hydrogenation reactions

Baweja, Saral,Clauss, Reike,Gelman, Dmitri,Hey-Hawkins, Evamarie

, p. 1344 - 1356 (2022/02/03)

A series of heterobimetallic PdII/MII complexes (MII = Mn, Co) were synthesised and tested as precatalysts for sequential Sonogashira coupling–alkyne semi-hydrogenation reactions to form Z-aryl alkenes. The carbometalated heterobimetallic PdII/CoII complex CoPdL3′ demonstrated an apparent cooperative effect compared to the corresponding monometallic counterparts. This compound was identified as a potent single-molecule catalyst for the one-pot Cu-free Sonogashira coupling of aryl bromides with terminal alkynes followed by chemo- and stereoselective semi-hydrogenation of the alkyne intermediate using NH3·BH3 as a hydrogen source. Furthermore, different aromatic substrates have been tested to show the generality of the reaction for the synthesis of Z-alkenes, including biologically active combretastatin A-4. In addition, the homogeneous nature of the catalytically active species was demonstrated.

Green and sustainable palladium nanomagnetic catalyst stabilized by glucosamine-functionalized Fe3O4@SiO2 nanoparticles for Suzuki and Heck reactions

Eslahi, Hassan,Sardarian, Ali Reza,Esmaeilpour, Mohsen

, (2021/04/26)

A novel magnetic and heterogeneous palladium-based catalyst stabilized by glucosamine-functionalized magnetic Fe3O4@SiO2 nanoparticle was synthesized. The strategy relies on the covalently bonding of glucosamine to cyanuric chloride-functionalized magnetic nanoparticles followed by complexation with palladium. The structure of magnetic nanocatalyst was fully determined by FT-IR, XRD, DLS, FE-SEM, TEM, ICP, UV-Vis, TGA, VSM, and EDX. The obtained results confirmed that the palladium nanoparticles stabilized by glucosamine immobilized onto the magnetic support exhibited high activity in cross-coupling reactions of Suzuki-Miyaura and Mizoroki-Heck. Various aryl halides were coupled with arylboronic acid (Suzuki cross-coupling reaction) and olefins (Heck reactions) under the green conditions to provide corresponding products in high to excellent yields. Interestingly, the catalyst can be easily isolated from the reaction media by magnetic decantation and can subsequently be applied for consecutive reaction cycles (at least seven times) with no notable reduction in the catalytic activity.

Bis(NHC)-Pd-catalyzed one-pot competitive C-C*C-C, C-C*C-O, C-C*C-N, and C-O*C-N cross-coupling reactions on an aryl di-halide catalyzed by a homogenous basic ionic liquid (TAIm[OH]) under base-free, ligand-free, and solvent-free conditions

Zhu, Yanfang,Xu, Guiyang,Kazemnejadi, Milad

, p. 11662 - 11671 (2021/07/11)

Bis(NHC)-Pd-catalyzed competitive asymmetrical C-C*C-C, C-C*C-O, C-C*C-N, and O-C*C-N cross-coupling reactions were performedviathe one-pot strategy in the presence of a new ionic liquid, which played the roles of solvent, base, and ligand simultaneously. The ionic liquid was prepared based on a methyl imidazolium moiety with hydroxyl counter anionsviaa Hofmann elimination on a 1,3,5-triazine framework (TAIm[OH]). Pd ions could be efficiently coordinated through the bis(NHC)-ligand moiety in the ionic liquid. Based on differences in the competitive kinetics of C-C cross-coupling reactions (Heck, Suzuki, and Sonogashira) with C-N and C-O cross-coupling reactions, and also differences in the kinetics of aryl halides, the coupling reactions could be selectively performed with a low amount of by-products. The competitive cross-coupling reactions were thus performed with high selectivity under mild reaction conditions.

Synthesis, crystal structure, and catalytic activity of bridged-bis(N-heterocyclic carbene) palladium(II) complexes in selective Mizoroki-Heck cross-coupling reactions

El Ali, Bassam,Fettouhi, Mohammed,Iali, Wissam,Mansour, Waseem,Suleiman, Rami

, (2021/08/09)

A series of three 1,3-propanediyl bridged bis(N-heterocyclic carbene)palladium(II) complexes (Pd-BNH1, Pd-BNH2, and Pd-BNH3), with + I effect order of the N-substituents of the ligand (isopropyl > benzyl > methoxyphenyl), was the subject of a spectroscopic, structural, computational and catalytic investigation. The bis(NHC)PdBr2 complexes were evaluated in Mizoroki-Heck coupling reactions of aryl bromides with styrene or acrylate derivatives and showed high catalytic efficiency to produce diarylethenes and cinnamic acid derivatives. The X-ray structure of the most active palladium complex Pd-BNH3 shows that the Pd(II) center is bonded to the two carbon atoms of the bis(N-heterocyclic carbene) and two bromide ligands in cis position, resulting in a distorted square planar geometry. The NMR data of Pd-BNH3 are consistent with a single chair-boat rigid conformer in solution with no dynamic behavior of the 8-membered ring palladacycle in the temperature range 25–120 °C. The catalytic activities of three Pd-bridged bis(NHC) complexes in the Mizoroki-Heck cross-coupling reactions were not found to have a direct correlation with +I effect order of the N-substituents of the ligand. However, a direct correlation was found between the DFT calculated absolute softness of the three complexes with their respective catalytic activity. The highest calculated softness, in the case of Pd-BNH3, is expected to favor the coordination steps of both the soft aryl bromides and alkenes in the Heck catalytic cycle.

NiFe2O4@SiO2@ZrO2/SO42-/Cu/Co nanoparticles: A novel, efficient, magnetically recyclable and bimetallic catalyst for Pd-free Suzuki, Heck and C-N cross-coupling reactions in aqueous media

Alavi G., Seyyedeh Ameneh,Nasseri, Mohammad Ali,Kazemnejadi, Milad,Allahresani, Ali,Hussainzadeh, Mahdi

, p. 7741 - 7757 (2021/05/13)

The novel heterogeneous bimetallic nanoparticles of Cu-Co were synthesized based on magnetic nanoparticles, and the magnetic nanocatalyst was characterized by XRD, FE-SEM, EDX mapping, BET, TEM, HRTEM, FTIR, TGA, and VSM. This catalyst was successfully applied as a recyclable magnetically catalyst in Heck, Suzuki, and C-N cross-coupling reactions with various aryl halides (iodides, bromides, and chlorides as challengeable substrates), with olefins, phenylboronic acid, and amines, respectively. We considered the rise of synergetic effects from the different Lewis acid and Br?nsted acid sites present in the catalyst. The catalyst was synthesized with cheap, available materials and a simple synthesis method. The catalyst can be separated easily using an external magnet. It was recycled for more than ten runs without a sensible loss of its catalytic activity, and no significant leaching of the Cu and Co quantity was observed. The significant benefits of the method are high-level generality, simple operation, and there are no heavy metals and toxic solvents. This is a quick, easy, efficacious and environmentally friendly protocol, and no by-products are formed in the reaction. These features make it an appropriate practical alternative protocol. In comparison with recent works, the other advantage of this catalyst is the synthesis of a wide variety of C-C and C-N bond derivatives (more than 40 derivatives). The other significant advantage is the low temperature of the reaction and the use of the least possible amount of the catalyst (0.003 g). The efficiency was good to excellent and the catalyst selectivity has been high. We aspire that our study inspires more interest to design novel catalysts based on using low-cost metal ions (such as cobalt and copper) in the cross-coupling reactions. This journal is

Introduction of a Recyclable Basic Ionic Solvent with Bis-(NHC) Ligand Property and The Possibility of Immobilization on Magnetite for Ligand- and Base-Free Pd-Catalyzed Heck, Suzuki and Sonogashira Cross-Coupling Reactions in Water

Min, Qingwang,Miao, Penghua,Chu, Deyu,Liu, Jinghan,Qi, Meijuan,Kazemnejadi, Milad

, p. 3030 - 3047 (2021/02/16)

A new versatile and recyclable NHC ligand precursor has been developed with ligand, base, and solvent functionalities for the efficient Pd-catalyzed Heck, Suzuki and Sonogashira cross-coupling reactions under mild conditions. Furthermore, NHC ligand precursor was immobilized on magnetite and its catalytic activity was also evaluated towards the coupling reactions as a heterogeneous catalyst. The NHC ligand precursor was prepared with imidazolium functionalization of TCT followed by a simple ion exchange by hydroxide ions. However, the results revealed an excellent catalytic activity for the both homogeneous and heterogeneous catalytic systems. 1.52?g.cm?3 and 1194 cP was obtained for the density and viscosity of the NHC ligand precursor respectively. On the other hand, the heterogeneous type could be readily recovered from the reaction mixture and reused for several times while preserving its properties. Heterogeneous nature of the magnetic catalyst was studied by hot filtration, mercury poisoning, and three-phase tests. High to excellent yields were obtained for all entries for the both homogeneous and heterogeneous catalysts, which reflects the high consistency of the catalyst. Graphic Abstract: [Figure not available: see fulltext.]

Recyclable heterogeneous iron supported on imidazolium ionic liquid catalysed palladium and copper-free Heck reaction

Deepa, Manickam,Kalaivani, Kolanjinathan,Parasuraman, Karthikeyan,Selvarasu, Uthayanila

, (2021/09/16)

A natural friendly iron-immobilized on imidazolium supported ionic liquid [Gmim]Cl-Fe (III) was effectively evaluated as a heterogeneous catalyst for Mizoroki-Heck reaction with good to excellent yield under solvent free condition. [Gmim]Cl-Fe (III) showed good activities that were comparable to that of palladium catalysts. Furthermore, this phosphine, copper and palladium- free catalyst was simply recovered from the reaction mixture and recycled seven times.

Ligand-free (: Z)-selective transfer semihydrogenation of alkynes catalyzed by in situ generated oxidizable copper nanoparticles

Grela, Karol,Kusy, Rafa?

, p. 5494 - 5502 (2021/08/16)

Herein, we present (Z)-selective transfer semihydrogenation of alkynes based on in situ generated CuNPs in the presence of hydrogen donors, such as ammonia-borane and a green protic solvent. This environmentally friendly method is characterized by operational simplicity combined with high stereo- and chemoselectivity and functional group compatibility. Auto-oxidation of CuNPs after the completion of a semihydrogenation reaction results in the formation of a water-soluble ammonia complex, so that the catalyst may be reused several times by simple phase-separation with no need for any special regeneration processes. Formed NH4B(OR)4 can be easily transformed back into ammonia-borane or into boric acid. In addition, a one-pot tandem sequence involving a Suzuki reaction followed by semihydrogenation was presented, which allows minimization of chemical waste production.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 1657-49-4