29921-41-3Relevant academic research and scientific papers
Multifunctional oxygen vacancies in WO3–x for catalytic alkylation of C–H by alcohols under red-light
Gu, Xianmo,Sun, Xichen,Wang, Yunwei,Zhang, Jin,Zheng, Zhanfeng,Zhu, Pengqi
, p. 208 - 217 (2021/09/06)
Surface reaction kinetics and light absorption properties of a photocatalyst are essential demands for efficiently solar to chemical energy converting. In this study, plasmonic WO3–x was firstly applied to photocatalytic alkylation of arenes under red light irradiation. The oxygen vacancies, both on the surface and in the bulk of WO3–x, allow abundant free electrons to increase carrier densities and support its LSPR using low energy photons. The surface oxygen vacancies have more functions: they not only release surface tungsten sites which ensure the chemisorption of alcohols due to the coordianation ability but also promote the activation of alcohols via an efficient transport of the holes on the neighbouring O sites to chemisorption alcohol species. In brief, the bulk oxygen vacancies provide abundant charges and the surface vacancies promote the bond adsorption and activation abilities, which ensure the high efficiency of photocatalytic alkylation of C–H.
Controlled Access to C1-Symmetrical Cyclotriveratrylenes (CTVs) by Using a Sequential Barluenga Boronic Coupling (BBC) Approach
Cailly, Thomas,Dubost, Emmanuelle,Fabis, Frédéric,Fossé, Pierre,Vigier, Clément
supporting information, p. 3756 - 3761 (2021/07/14)
We describe here a controlled approach to C1-symmetrical cyclotriveratrylenes (CTVs). In this approach dimers are synthesized through Barluenga boronic coupling (BBC) and after borylation, the last aromatic ring is introduced by a second BBC. After functional transformations of the trimers, the CTVs are formed using intramolecular SEAr. (Figure presented.).
Phosphonic acid mediated practical dehalogenation and benzylation with benzyl halides
Gao, Jing,Han, Li-Biao,Ma, Yonghao,Tang, Zilong,Wu, Xiaofang,Xiao, Jing
, p. 22343 - 22347 (2019/07/31)
For the first time, by using H3PO3/I2 system, various benzyl chlorides, bromides and iodides were dehalogenated successfully. In the presence of H3PO3, benzyl halides underwent electrophilic substitution reactions with electron-rich arenes, leading to a broad range of diarylmethanes in good yields. These transformations feature green, cheap reducing reagents and metal-free conditions. A possible mechanism was proposed.
Carbonyl and olefin hydrosilylation mediated by an air-stable phosphorus(iii) dication under mild conditions
Andrews, Ryan J.,Chitnis, Saurabh S.,Stephan, Douglas W.
supporting information, p. 5599 - 5602 (2019/05/21)
The readily-accessible, air-stable Lewis acid [(terpy)PPh][B(C6F5)4]21 is shown to mediate the hydrosilylation of aldehydes, ketones, and olefins. The utility and mechanism of these hydrosilylations are considered.
Scalable Wolff-Kishner Reductions in Extreme Process Windows Using a Silicon Carbide Flow Reactor
Znidar, Desiree,O'Kearney-Mcmullan, Anne,Munday, Rachel,Wiles, Charlotte,Poechlauer, Peter,Schmoelzer, Christoph,Dallinger, Doris,Kappe, C. Oliver
supporting information, p. 2445 - 2455 (2019/11/03)
A safe and scalable continuous flow strategy for Wolff-Kishner reductions that employs methanol as the solvent has been developed. The use of low-cost hydrazine as the reducing agent in combination with a caustic base provides an atom-efficient, environmentally friendly method for the deoxygenation of aldehydes and ketones to alkanes. Because of the required harsh and corrosive reaction conditions (200 °C, 50 bar), reactor materials such as stainless steel, glass, or any type of polymer have compatibility problems, rendering this process problematic on a production scale. The use of corrosion-resistant silicon carbide (SiC) as the reactor material opens up the possibility of performing Wolff-Kishner reductions on scale with a considerably improved safety profile. Methanol as the solvent significantly simplifies the workup procedure compared with the generally employed high-boiling solvents such as diethylene glycol. The continuous flow protocol was applied to a number of substrates and provided the desired products in good to high yields with space-time yields of up to 152 g L-1 h-1. In addition, a pharmaceutically valuable active pharmaceutical ingredient precursor was synthesized by employing this higherature/pressure Wolff-Kishner protocol.
Nickel-catalyzed cross-coupling of aldehydes with aryl halides: Via hydrazone intermediates
Tang, Jianting,Lv, Leiyang,Dai, Xi-Jie,Li, Chen-Chen,Li, Lu,Li, Chao-Jun
, p. 1750 - 1753 (2018/02/21)
Traditional cross-couplings require stoichiometric organometallic reagents. A novel nickel-catalyzed cross-coupling reaction between aldehydes and aryl halides via hydrazone intermediates has been developed, merging the Wolff-Kishner reduction and the classical cross-coupling reactions. Aromatic aldehydes, aryl iodides and aryl bromides are especially effective in this new cross-coupling chemistry.
Cross-Coupling of Phenol Derivatives with Umpolung Aldehydes Catalyzed by Nickel
Lv, Leiyang,Zhu, Dianhu,Tang, Jianting,Qiu, Zihang,Li, Chen-Chen,Gao, Jian,Li, Chao-Jun
, p. 4622 - 4627 (2018/05/22)
A nickel-catalyzed cross-coupling to construct the C(sp2)-C(sp3) bond was developed from two sustainable biomass-based feedstocks: phenol derivatives with umpolung aldehydes. This strategy features the in situ generation of moisture/air-stable hydrazones from naturally abundant aldehydes, which act as alkyl nucleophiles under catalysis to couple with readily available phenol derivatives. The avoidance of using both halides as the electrophiles and organometallic or organoboron reagents (also derived from halides) as the nucleophiles makes this method more sustainable. Water tolerance, great functional group (ketone, ester, free amine, amide, etc.) compatibility, and late-stage elaboration of complex biological molecules exemplified its practicability and unique chemoselectivity over organometallic reagents.
Feedstocks to Pharmacophores: Cu-Catalyzed Oxidative Arylation of Inexpensive Alkylarenes Enabling Direct Access to Diarylalkanes
Vasilopoulos, Aristidis,Zultanski, Susan L.,Stahl, Shannon S.
supporting information, p. 7705 - 7708 (2017/06/20)
A Cu-catalyzed method has been identified for selective oxidative arylation of benzylic C-H bonds with arylboronic esters. The resulting 1,1-diarylalkanes are accessed directly from inexpensive alkylarenes containing primary and secondary benzylic C-H bonds, such as toluene or ethylbenzene. All catalyst components are commercially available at low cost, and the arylboronic esters are either commercially available or easily accessible from the commercially available boronic acids. The potential utility of these methods in medicinal chemistry applications is highlighted.
Synthetic method of diarylmethanes
-
Paragraph 0223; 0224; 0225; 0226; 0227, (2017/08/28)
The invention discloses a synthetic method of diarylmethanes. The method is characterized in that benzyl pseudohalide and aromatic boric acid are reacted in an organic solvent under alkaline condition. The method employs easily available raw materials, conversion is realized under effect of no transition metal catalysis, water-free and oxygen-free are not required, Lewis acid catalysis is not required, the method has wide substrate universality, and various substituted diarylmethanes can be synthesized by the method.
Pd-Catalyzed Decarbonylative Cross-Couplings of Aroyl Chlorides
Malapit, Christian A.,Ichiishi, Naoko,Sanford, Melanie S.
, p. 4142 - 4145 (2017/08/15)
This report describes a method for Pd-catalyzed decarbonylative cross-coupling that enables the conversion of carboxylic acid derivatives to biaryls, aryl amines, aryl ethers, aryl sulfides, aryl boronate esters, and trifluoromethylated arenes. The success of this transformation leverages the Pd0/Brettphos-catalyzed decarbonylative chlorination of aroyl chlorides, which can then participate in diverse cross-coupling reactions in situ using the same Pd catalyst.
