31702-95-1

Usage

Synthesis Reference(s)

Journal of the American Chemical Society, 110, p. 8736, 1988 DOI: 10.1021/ja00234a047

Upstream product

• 107-85-7 1-amino-3-methylbutane 
• 98-88-4 benzoyl chloride 
• 78-78-4 methylbutane 
• 582-61-6 benzoyl azide 
• 1466-83-7 N-benzoyl-L-leucine 
• 55210-77-0 1-azido-3-methylbutane 
• 65-85-0 benzoic acid 
• 75-66-1 2-methylpropan-2-thiol 
• 123-51-3 i-Amyl alcohol 
• 55-21-0 benzamide 
• 100-51-6 benzyl alcohol 
• 100-47-0 benzonitrile 
• 455-32-3 benzoyl fluoride 
• 932-90-1 Benzaldoxime 

Downstream Products

• 16466-48-1 N-isopentyl-N-phenylbenzamide 
• 38449-07-9 N-(3-methyl-butyryl)-benzamide 
• 34021-60-8 N-(3-hydroxy-3-methylbutyl)benzamide 

Relevant academic research and scientific papers

Direct amidation of non-activated carboxylic acid and amine derivatives catalyzed by TiCp2Cl2

This paper described a mild and efficient direct amidation of non-activated carboxylic acid and amine derivatives catalyzed by TiCp2Cl2. Arylacetic acid derivatives reacted with different amines to afford the corresponding amides in good to excellent yield except of aniline. Aryl formic acids failed to react with aniline but smoothly reacted with aliphatic amines and benzylamine in moderate to good yield, fatty acids reacting with benzyl and aliphatic amines give amides in good to excellent yield. Chiral amino acids derivatives were transformed into amides without racemization in moderate yield. The possible mechanism of direct amidation catalyzed by TiCp2Cl2 was discussed. This catalytic method is very suitable for the amidation of low sterically hindered arylacetic acid, fatty acids with different low sterically hindered amines except aniline, as well as the amidation of aryl formic acid with benzyl and aliphatic amines.

Visible-Light-Driven Oxidation of N -Alkylamides to Imides Using Oxone/H 2 O and Catalytic KBr

Imides are prepared conveniently by visible-light-driven oxidations of various N -alkylamides under mild conditions. The majority of the reactions proceed efficiently by using Oxone as the oxidant in the presence of a catalytic amount of KBr in H 2 O/CH 2 Cl 2 under irradiation by an 8 W white LED at room temperature. Experimental studies suggest that an imine, obtained from the substrate amide via a radical process, is the key intermediate.

Intensified Microwave-Assisted N-Acylation Procedure - Synthesis and Activity Evaluation of TRPC3 Channel Agonists with a 1,3-Dihydro-2H-benzo[d]imidazol-2-one Core

Upon controlled microwave heating and using cyanuric chloride as a coupling reagent, an efficient amidation procedure for the synthesis of 1,3-dihydro-2H-benzo[d]imidazol-2-one-based agonists of TRPC3/6 ion channels has been developed. Compared to the few conventional protocols, a drastic reduction in processing time from ca. 2 days down to 10 minutes was achieved accompanied by significantly improved product yields. The robustness of the method was confirmed by 18 additional examples including aromatic, aliphatic, and heterocyclic amines and acids. The obtained agonists were screened for biological activity at 1 μM concentration and few structure-activity relations have been established.

Sulfur–Fluoride Exchange (SuFEx)-Mediated Synthesis of Sterically Hindered and Electron-Deficient Secondary and Tertiary Amides via Acyl Fluoride Intermediates

Amide bond formation is one of the most executed reactions in chemistry and biology. This is largely due to the ubiquity of the amide functional group in biological molecules, natural products and pharmaceutically important drugs. We report here the development of “SuFExAmide”: a new sulfur–fluoride exchange (SuFEx) click chemistry based protocol for the efficient amidation of carboxylic acids via acyl fluoride intermediates. We have developed benzene-1,3-disulfonyl fluoride as a cost effective, powerful and versatile coupling agent, which delivers challenging secondary and tertiary amides in excellent yields from sterically hindered and electron-deficient amines. The straightforward method offers significant benefits over existing protocols in terms of substrate scope, efficiency and ease of operation and is demonstrated by the synthesis of 44 amides, including GNF6702, an antiprotozoal drug candidate. In the majority of cases, the amide products are obtained in high yield without the need for excess reagents or chromatographic purification.

A process for preparing N - alkyl amide method (by machine translation)

The invention discloses a method for preparing N - alkyl amide of the method. In the reaction container, joins the nitrile, oxime, transition metal catalyst iridium complex [Cp * IrCl2 ]2 , Toluene; the reaction mixture in 100 °C reaction under 6 hours, cooling to room temperature; then the alcohol and alkali compound is added, the reaction mixture in the 130 °C react again under 12 hours later, then through the column separation, to obtain the target compound. The invention from the fully commercialized nitrile, proceed wowo and mellow, in the participation of transition metal iridium catalyst, to directly obtain N - alkyl amide, the reaction exhibits three significant advantages: 1) the use of the commercialization of the starting material; 2) low catalyst load; 3) is environment-friendly and easy to control. Therefore, the reaction in accordance with the requirement of green chemistry, has broad prospects of development. (by machine translation)

Method for synthesizing N-alkylamide

The invention discloses a method for synthesizing N-alkylamide. In a reaction container, adding nitrile, a complex of a transition-metal catalyst gold, a solvent tetrahydrofuran and H2O; reacting a reaction mixture for several hours at the temperature of 130-140 DEG C, cooling the reaction mixture to room temperature, performing vacuum pressure reduction to remove the solvent; adding a compound alcohol, alkali, the complex of a transition-metal catalyst iridium, a solvent toluene, reacting the reaction mixture for several hours at the temperature of 130 DEG C, through column separation, obtaining a target compound. According to the invention, with participation of the transition-metal catalyst, commercial nitrile is hydrolyzed to generate an amide intermediate, and then is subjected to an alkylation reaction with alcohol to obtain N-alkylamide. The reaction has three obvious advantages: 1) the commercial nitrile and alcohol which is almost nontoxic are taken as initial raw materials; 2) only water is generated as a by-product in the reaction, so that the reaction has no harm on environment; and 3) reaction atom economy is high. The reaction accords with green chemistry requirement, and has wide development prospect.

Combination of gold and iridium catalysts for the synthesis of N-alkylated amides from nitriles and alcohols

An alternative and efficient approach for the synthesis of N-alkylated amides from nitriles and alcohols was proposed and accomplished. By the combination of [(IPr)Au(NTf2)] (IPr = 1,3-bis(diisopropylphenyl)imidazol-2-ylidene) and [CpIrCl2]2 (Cp = η5-pentamethylcyclopentadienyl), a series of nitriles were first hydrated to give amides, in which the resulting amides were further N-alkylated with a variety of alcohols as alkylating agents to afford N-alkylated amides with good to excellent yields. Compared with previous methods for the synthesis of N-alkylated amides from nitriles and alcohols as starting materials, this protocol could be accomplished with high atom economy under more environmentally benign conditions.

Catalyst and method for producing the same

PROBLEM TO BE SOLVED: To provide a method for producing an amide compound from a primary alcohol and at least one selected from a primary amine, a secondary amine and derivatives of those under relatively mild conditions with high selectivity and a high conversion ratio.SOLUTION: A method for producing an amide compound comprises a step of obtaining the amide compound from a primary alcohol and at least one selected from a primary amine, a secondary amine and derivatives of those, in the presence of a catalyst comprising a carrier formed by crosslinking a crosslinkable functional group of a styrene-based polymer having a side chain containing the crosslinkable functional group, and a nanosize cluster and carbon black supported on the carrier, wherein the nanosize cluster is at least one selected from a nanosize gold cluster and a nanosize cluster of gold and at least one group 8 metal selected from iron, cobalt and nickel.

Selective formation of secondary amides via the copper-catalyzed cross-coupling of alkylboronic acids with primary amides

For the first time, a general catalytic procedure for the cross-coupling of primary amides and alkylboronic acids is demonstrated. The key to the success of this reaction was the identification of a mild base (NaOSiMe3) and oxidant (di-tert-butyl peroxide) to promote the copper-catalyzed reaction in high yield. This transformation provides a facile, high-yielding method for the monoalkylation of amides.