89-96-3Relevant academic research and scientific papers
Chemoselective Hydrogenation of Olefins Using a Nanostructured Nickel Catalyst
Klarner, Mara,Bieger, Sandra,Drechsler, Markus,Kempe, Rhett
supporting information, p. 2157 - 2161 (2021/05/21)
The selective hydrogenation of functionalized olefins is of great importance in the chemical and pharmaceutical industry. Here, we report on a nanostructured nickel catalyst that enables the selective hydrogenation of purely aliphatic and functionalized olefins under mild conditions. The earth-abundant metal catalyst allows the selective hydrogenation of sterically protected olefins and further tolerates functional groups such as carbonyls, esters, ethers and nitriles. The characterization of our catalyst revealed the formation of surface oxidized metallic nickel nanoparticles stabilized by a N-doped carbon layer on the active carbon support.
Controlling the Lewis Acidity and Polymerizing Effectively Prevent Frustrated Lewis Pairs from Deactivation in the Hydrogenation of Terminal Alkynes
Geng, Jiao,Hu, Xingbang,Liu, Qiang,Wu, Youting,Yang, Liu,Yao, Chenfei
, p. 3685 - 3690 (2021/05/31)
Two strategies were reported to prevent the deactivation of Frustrated Lewis pairs (FLPs) in the hydrogenation of terminal alkynes: reducing the Lewis acidity and polymerizing the Lewis acid. A polymeric Lewis acid (P-BPh3) with high stability was designed and synthesized. Excellent conversion (up to 99%) and selectivity can be achieved in the hydrogenation of terminal alkynes catalyzed by P-BPh3. This catalytic system works quite well for different substrates. In addition, the P-BPh3 can be easily recycled.
Novel CoNi-metal-organic framework crystal-derived CoNi?C: Synthesis and effective cascade catalysis
Chen, Yu-Zhen,Li, Chenchen,Sun, Jia-Lu,Wang, Guo-Ming,Wang, Lin,Zhang, Jian-Wei
supporting information, p. 10567 - 10573 (2020/09/18)
Evaluating the catalytic influence of metal sites on derivates obtained from the calcination of metal-organic frameworks (MOFs) is very important for the rational construction of novel MOFs. Based on this catalytic functional guidance, two new Co-MOF and CoNi-MOF crystals were designed and synthesized, and further pyrolyzed to obtain corresponding porous carbon-based catalysts. Interestingly, the derivates exhibited better catalytic performance toward the tandem reaction of dehydrogenation of NH3BH3 and subsequent hydrogenation reduction of nitro/olefin compounds than those of the CoNi-ZIF (a star MOF)-derived CoNi?carbon and most metal catalysts. Significantly, the CoNi?C maintained excellent activity, even after 30 cycles, demonstrating its great longevity and durability, which are especially important for the practical application of metal catalysts in industrial catalysis.
Hydrogenation of Alkenes Catalyzed by a Non-pincer Mn Complex
Rahaman, S. M. Wahidur,Pandey, Dilip K.,Rivada-Wheelaghan, Orestes,Dubey, Abhishek,Fayzullin, Robert R.,Khusnutdinova, Julia R.
, p. 5912 - 5918 (2020/10/30)
Hydrogenation of substituted styrenes and unactivated aliphatic alkenes by molecular hydrogen has been achieved using a Mn catalyst with a non-pincer, picolylphosphine ligand. This is the second reported example of alkene hydrogenation catalyzed by a Mn complex. Mechanistic studies showed that a Mn hydride formed by H2 activation in the presence of a base is the catalytically active species. Based on experimental and DFT studies, H2 splitting is proposed to occur via a metal-ligand cooperative pathway involving deprotonation of the CH2 arm of the ligand, leading to pyridine dearomatization.
Transition metal complexes of a bis(carbene) ligand featuring 1,2,4-triazolin-5-ylidene donors: structural diversity and catalytic applications
Donthireddy, S. N. R.,Illam, Praseetha Mathoor,Rit, Arnab,Singh, Vivek Kumar
, p. 11958 - 11970 (2020/09/21)
Dialkylation of the 1,3-bis(1,2,4-triazol-1-yl)benzene with ethyl bromide results in the formation of [L-H2]Br2which, upon salt metathesis with NH4PF6, readily yields the bis(triazolium) salt [L-H2](PF6)2with non-coordinating counterions. [L-H2](PF6)2and Ag2O react in a 1?:?1 ratio to yield a binuclear AgI-tetracarbene complex of the composition [(L)2Ag2](PF6)2which undergoes a facile transmetalation reaction with [Cu(SMe2)Br] to deliver the corresponding CuI-NHC complex [(L)2Cu2](PF6)2. In contrast, the [L-H2]Br2reacts with [Ir(Cp*)Cl2]2to generate a doubly C-H activated IrIII-NHC complex5. Similarly, the triazolinylidene donor supported diorthometalated RuII-complex6is also obtained. Complexes5and6represent the first examples of a stable diorthometalated binuclear IrIII/RuII-complex supported by 1,2,4-triazolin-5-ylidene donors. The synthesized IrIII-NHC complex5is found to be more effective than its RuII-analogue (6) for the reduction of a range of alkenes/alkynesviathe transfer hydrogenation strategy. Conversely, RuII-complex6is identified as an efficient catalyst (0.01 mol% loading) for the β-alkylation of a wide range of secondary alcohols using primary alcohols as alkylating partnersviaa borrowing hydrogen strategy.
Microwave assisted hydrogenation of olefins by Pd NPs@polystyrene resin using a gas addition kit: A robust and sustainable protocol
Sharma, Anuj S.,Kaur, Harjinder
supporting information, p. 18935 - 18941 (2018/11/27)
Polystyrene (PS) resin bead supported palladium nanoparticles (Pd NPs@PS resin) were prepared and their catalytic activity for the hydrogenation of olefins was investigated under microwave heating. The hydrogenation of styrene was effectively carried out in EtOH/H2O, in the presence of 0.00035 mmol of the catalyst to afford the corresponding ethylbenzene in high yield within 20 min under microwave heating. The catalyst efficiency measured in terms of turn over number (TON) and turn over frequency (TOF) was found to be 2829 and 8573 (h-1), respectively. The encapsulated palladium nanoparticles were easily recovered by a simple filtration method and reused several times without significant loss in their catalytic activity. Further, the method showed a wide substrate scope under mild reaction conditions, making it a green versatile and highly sustainable protocol.
COBALT COMPLEXES, PROCESS FOR PREPARATION AND USE THEREOF
-
Page/Page column 17; 18, (2019/01/06)
The present invention discloses a cobalt compound of formula (I), a process for the preparation and use thereof. The present invention further relates to a pharmaceutical composition and a method inhibition of Tau Aggregation in a subject in need thereof using compound of formula (I).
Visible Light-Induced Oxidative Chlorination of Alkyl sp3 C-H Bonds with NaCl/Oxone at Room Temperature
Zhao, Mengdi,Lu, Wenjun
supporting information, p. 4560 - 4563 (2017/09/11)
A visible light-induced monochlorination of cyclohexane with sodium chloride (5:1) has been successfully accomplished to afford chlorocyclohexane in excellent yield by using Oxone as the oxidant in H2O/CF3CH2OH at room temperature. Other secondary and primary alkyl sp3 C-H bonds of cycloalkanes and functional branch/linear alkanes can also be chlorinated, respectively, under similar conditions. The selection of a suitable organic solvent is crucial in these efficient radical chlorinations of alkanes in two-phase solutions. It is studied further by the achievement of high chemoselectivity in the chlorination of the benzyl sp3 C-H bond or the aryl sp2 C-H bond of toluene.
Cu(II)/Cu(0)@UiO-66-NH2: Base metal@MOFs as heterogeneous catalysts for olefin oxidation and reduction
Wang, Jian-Cheng,Hu, Yu-Hong,Chen, Gong-Jun,Dong, Yu-Bin
, p. 13116 - 13119 (2016/11/09)
Two copper-loaded MOF materials, namely Cu(ii)@Ui-O-66-NH2 (1) and Cu(0)@UiO-66-NH2 (2), are reported. They can, respectively, serve as highly efficient heterogeneous catalysts for olefin oxidation and hydrogenation under mild conditions. Complete styrene hydrogenation occurs in 15 min at ambient temperature with quantitative yield.
Enantioselective hydroformylation of 2- and 4-substituted styrenes with PtCl2[(R)-BINAP] + SnCl2‘in situ’ catalyst
Pongrácz, Péter,Kollár, László
, p. 118 - 123 (2016/10/25)
Two sets of styrenes possessing various substituents either in ortho or para position were hydroformylated in the presence of ‘in situ’ catalyst formed from PtCl2[(R)-BINAP] and tin(II) chloride. The reversal of the absolute configuration of the preferred enantiomers was observed using both sets of substrates by the variation of the reaction temperature in the range of 40–100 °C. In case of the 4-substituted styrenes, the reversal temperature of the enantioselectivity shows correlation with the Hammett substituent constants, i.e., with the electron donor or electron acceptor properties of the para-substituents. This phenomenon was explained by the reversible formation of the Pt-branched alkyl intermediates, leading to the corresponding (R)- and (S)-enantiomers of 2-arylpropanals. Strong substituent effect on the regioselectivity was observed in the hydroformylation of 2-substituted styrenes: the presence of substituents characterised by larger steric parameter resulted in the highly favoured formation of the linear aldehyde. For instance, regioselectivities of 45%, 22% and 7% towards branched aldehyde were obtained with styrene, 2-fluoro- and 2-bromostyrene, respectively, at 80 °C reaction temperature. In addition to the characteristic change of regioselectivity, the reversal of absolute configuration as a function of reaction temperature was also observed.
