Preparation of a MANGANESE TITANATE (cas 12032-74-5) nanosensor: Application in electrochemical studies of captopril in the presence of para-aminobenzoic acid
-
Add time:07/29/2019 Source:sciencedirect.com
This study reports the synthesis and characterization of a novel nanostructure-based electrode for electrochemical studies and determination of captopril (CP). At first MANGANESE TITANATE (cas 12032-74-5) nanoceramics were synthesized by the sol–gel method. The structural evaluations of the pure nanopowders were investigated by different techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Then it was used to prepare a new nanostructured manganese titanate carbon paste electrode (MnTiO3/CPE). The characterization of the modified sensor was carried out by comprehensive techniques such as electrochemical impedance spectroscopy (EIS), SEM, and voltammetry. Subsequently, the modified electrode was used for CP catalytic oxidation in the presence of para-aminobenzoic acid (PABA) as a mediator. The results showed that PABA has high catalytic activity for CP oxidation. The electrochemical behavior of CP was studied by cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CHA), and differential pulse voltammetry (DPV) techniques. Under the optimized conditions, the catalytic oxidation peak current of CP showed two linear dynamic concentration ranges of 1.0 × 10−8 to 1.0 × 10−7 and 1.0 × 10−7 to 1.0 × 10−6, with a detection limit of 1.6 nM (signal/noise = 3), using the DPV technique. Finally, the proposed method was successfully applied for determination of CP in pharmaceutical and biological samples.
We also recommend Trading Suppliers and Manufacturers of MANGANESE TITANATE (cas 12032-74-5). Pls Click Website Link as below: cas 12032-74-5 suppliers
Prev:Room temperature ferromagnetism and its correlation to ferroelectricity of manganese embedded in lead zirco-titanate
Next:Catalytic properties of metal loaded silica-pillared MANGANESE TITANATE (cas 12032-74-5) for CO oxidation) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Synthesis of MANGANESE TITANATE (cas 12032-74-5) MnTiO3 powders by a sol–gel–hydrothermal method08/03/2019
- Evaluation of the low temperature performance of lithium manganese oxide/lithium titanate lithium-ion batteries for start/stop applications08/02/2019
- Synthesis and structural properties of MANGANESE TITANATE (cas 12032-74-5) MnTiO3 nanoparticle08/01/2019
- Hydrothermal synthesis of Mn2+ doped titanate nanotubes: Investigation of their structure and room temperature ferromagnetic behavior07/31/2019
- Catalytic properties of metal loaded silica-pillared MANGANESE TITANATE (cas 12032-74-5) for CO oxidation07/30/2019
- Room temperature ferromagnetism and its correlation to ferroelectricity of manganese embedded in lead zirco-titanate07/28/2019
- Competitive ion-exchange of manganese and gadolinium in titanate nanotubes07/27/2019
- Improved performance of titanate nanostructures for manganese adsorption and posterior pollutants photocatalytic degradation07/26/2019
-
Health and Chemical more >


