Loading Characteristics of Nanofiber Coated Air Intake Filter Media by Potassium Chloride, Ammonium Sulfate, and Ammonium Nitrate Fine Particles and the Comparison with Conventional Cellulose Filter Media
-
Add time:07/13/2019 Source:sciencedirect.com
Air filters operate in versatile environments, such as different relative humidities (RH), temperatures. Those factors could affect the state of atmospheric hygroscopic salt pollutants, mainly ammonium sulfate and ammonium nitrate. Air filters operation performance can be affected by operation environments and the state of atmospheric pollutants. However, current filter testing standards overlook the variation of filter operation environment and the diversity of atmospheric pollutants. This study aims to research the RH effect and hygroscopic salt particles effect of nanofiber coated air filter operation performance. A nanofiber coated cellulose filter media was tested with potassium chloride, ammonium sulfate, and ammonium nitrate particles in both dry and wet states. Testing RH covers from below salts’ efflorescence RH to above deliquesce RH to achieve different particle states. Both filter loading curves and the volume loading at 4 inches of water were compared between different testing conditions. The results are also compared with conventional cellulose filter media results. Generally, the higher the testing RH, the greater the volume loading, and this applies to both nanofiber coated cellulose filter media and conventional cellulose filter media regardless of salt particle states. The volume loading of dry particles is greater on nanofiber coated cellulose air filter than conventional cellulose filter, whereas the volume loading of wet particles is greater on conventional cellulose filter than nanofiber coated cellulose filter. This is because of interactions between particle states, moisture activities, and filter structures. This study reveals that the filter selection should be based on operation environments and the pollutant state to achieve a longer service life of air filters. A moderate increase of the operation RH could prolong air filters’ service life.
We also recommend Trading Suppliers and Manufacturers of POTASSIUM AMMONIUM SULFATE (cas 23208-79-9). Pls Click Website Link as below: cas 23208-79-9 suppliers
Prev:Influence of selected potassium salts on thermal stability of ammonium nitrate
Next:Solubilities in aqueous solutions of the sodium salts of succinic and glutaric acid with and without ammonium sulfate) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Studies on lauric acid conversion to methyl ester via catalytic esterification using ammonium ferric sulphate07/19/2019
- High time-resolved measurements of water-soluble sulfate, nitrate and ammonium in PM2.5 and their precursor gases over the Eastern Mediterranean07/18/2019
- Damage of magnesium potassium phosphate cement under dry and wet cycles and sulfate attack07/17/2019
- Raman Study of Sodium Potassium Sulphate Crystals07/16/2019
- An investigation of the effect of ammonium sulfate addition on compound fertilizer granulation07/15/2019
- Solubilities in aqueous solutions of the sodium salts of succinic and glutaric acid with and without ammonium sulfate07/14/2019
- Influence of selected potassium salts on thermal stability of ammonium nitrate07/12/2019
- Effect of relative humidity on loading characteristics of cellulose filter media by submicrometer potassium chloride, ammonium sulfate, and ammonium nitrate particles07/11/2019
-
Health and Chemical more >
-
Related Products
- Ammonium (-)-3-bromo-8-camphorsulfonate
- Ammonium (S)-5-((4-amino-4-carboxy-1-oxobutyl)amino)-2-nitrobenzoate
- Ammonium 1-pyrrolidinedithiocarbamate
- Ammonium 2,4-dichlorophenoxyacetate
- Ammonium 2-hydroxyethanesulphonate
- Ammonium 4-nitrobenzoate dihydrate
- Ammonium acetate
- Ammonium adipate
- Ammonium alginate
- Ammonium azide


