The ohmic contact to the silicon Schottky barrier using VANADIUM SILICIDE (cas 12039-76-8) and gold or silver metallization

Add time:08/04/2019    Source:sciencedirect.com

The purity check of silicon by DLTS and other capacitance spectroscopy techniques requires high-quality ohmic contact to the silicon structure with a gold Schottky barrier using a VANADIUM SILICIDE (cas 12039-76-8) layer on the back side of the structure. The samples were made from n-type silicon wafers with a carrier concentration of 1013 cm−3. A Schottky barrier was formed by evaporation of gold in vacuum. An ohmic contact was produced on the opposite side of the wafer by evaporation in vacuum of vanadium silicide and a silver or gold layer over it. The control methods were DLTS and I-V characteristics. The described structure provides a stable ohmic contact with a low reverse current and low noise. The uncontrollable impurity level did not change after barrier and ohmic contact deposition and was equal to ∼ 1010 cm−3.

We also recommend Trading Suppliers and Manufacturers of VANADIUM SILICIDE (cas 12039-76-8). Pls Click Website Link as below: cas 12039-76-8 suppliers

Prev:Field activated combustion synthesis of the silicides of vanadium
Next:Formation of VANADIUM SILICIDE (cas 12039-76-8) by high dose ion implantation)