Pack-boriding of Fe–Mn binary alloys: Characterization and kinetics of the boride layers

Add time:08/02/2019    Source:sciencedirect.com

In this work, the boronizing of Fe–Mn binary alloys at 0.42, 0.76 and 0.94 wt.% Mn was carried out in a solid medium using the powder pack method. In this method, commercial Ekabor-II boron source and activator (ferro-silicon) were thoroughly mixed to form the boriding medium. The samples were boronized in an electrical resistance furnace for exposure times of 2, 4, 6 and 8 h at 1173 K under atmospheric pressure and a series of boronized samples in the temperature range 1073–1373 K for 3 h. After the furnace process, boronized samples were removed from the furnace and cooled in air. Afterwards, the boride layers generated by the pack-boronizing process were characterized by optical microscopy, scanning electron microscopy, XRD analysis, Vickers microhardness and tensile testing. The generated boride layers, showing a saw-tooth morphology, had a surface microhardness in the range 1400–1270 HV0.1. It was shown that the values of yield stresses and ultimate tensile stresses were increased as the Mn content increases in the boronized Fe–Mn binary alloys. In contrast, the values of elongations determined from the stress–strain curves were decreased. Furthermore, it was found that the calculated mean value of the activation energy of boron diffusion was close to 119 J/mol.

We also recommend Trading Suppliers and Manufacturers of MANGANESE BORIDE (cas 12045-15-7). Pls Click Website Link as below: cas 12045-15-7 suppliers

Prev:Low-temperature boriding of high-carbon steel
Next:Anisotropic elastic and thermal properties of titanium borides by first-principles calculations)