Experimental investigation into the crack propagation in multiphase Tantalum carbide (cas 12070-06-3) ceramics

Add time:07/31/2019    Source:sciencedirect.com

Tantalum carbide (cas 12070-06-3) ceramics with high volume fractions of the ζ-Ta4C3 phase have been shown to exhibit high fracture strength and toughness as compared to those in absence of this phase. In this work, we investigated how microcracks propagated in this these high toughness ceramics using Knoop and Vickers microindentation. The Knoop indentations demonstrated that cracking preferentially occurred parallel to the lath structure in ζ-Ta4C3; however shorter cracks did form between the laths when a sufficient driving force was present. The resulting crack path was tortuous providing direct evidence for toughening through crack deflection; however, the microscale nature of the work cannot rule out crack bridging as a toughening mechanism as well. Plasticity is also observed under the indents, but is likely a result of the high confining pressures that occurred during indentation allowing for plastic flow.

We also recommend Trading Suppliers and Manufacturers of Tantalum carbide (cas 12070-06-3). Pls Click Website Link as below: cas 12070-06-3 suppliers

Prev:Low-temperature synthesis of Tantalum carbide (cas 12070-06-3) by facile one-pot reaction
Next:Synthesis of ultra-fine Tantalum carbide (cas 12070-06-3) powders by a combinational method of sol–gel and spark plasma sintering)