Experimental observation of zinc dialkyl dithiophosphate (ZDDP)-induced iron sulphide formation
-
Add time:07/29/2019 Source:sciencedirect.com
Zinc dialkyl dithiophosphate (ZDDP) as a well-known anti-wear additive enhances the performance of the lubricant beyond its wear-protection action, through its anti-oxidant and Extreme Pressure (EP) functionality. In spite of over thirty years of research attempting to reveal the mechanism of action of ZDDP, there are still some uncertainties around the exact mechanisms of its action. This is especially the case with the role of sulphide layer formed in the tribofilm and its impact on surface fatigue. Although iron sulphide on the substrate is hypothesised in literature to form as a separate layer, there has been no concrete experimental observation on the distribution of the iron sulphide as a dispersed precipitate, distinct layer at the steel substrate or both. It remains to be clarified whether the iron sulphide layer homogeneously covers the surface or locally forms at the surface. In the current study a cross section of the specimen after experiment was prepared and has been investigated with Transmission Electron Microscopy (TEM) and Energy-Dispersive X-ray (EDX) elemental analysis. A 5–10 nm iron sulphide layer is visualised on the interface as a separate layer underneath the phosphate layer with an altered distribution of tribofilm elements near the crack site. The iron sulphide interface layer is more visible near the crack site where the concentration of the sulphur is enhanced. Also, ZDDP elements were clearly detected inside the crack with a varied relative concentration from the crack-mouth to the crack-tip. Sulphur is present inside the crack to a higher extent than in the bulk of the tribofilm.
We also recommend Trading Suppliers and Manufacturers of Zinc dithiophosphate (cas 19210-06-1). Pls Click Website Link as below: cas 19210-06-1 suppliers
Prev:Synthesis, structural characterization, docking, lipophilicity and cytotoxicity of 1-[(1R)-1-(6-fluoro-1,3-benzothiazol-2-yl)ethyl]-3-alkyl carbamates, novel acetylcholinesterase and butyrylcholinesterase pseudo-irreversible inhibitors
Next:Role of zinc dialkyl dithiophosphate in carbon black induced abrasive wear) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Structural determination of Zinc dithiophosphate (cas 19210-06-1)s in lubricating oils by gas chromatography–mass spectrometry with electron impact and electron-capture negative ion chemical ionization08/07/2019
- Effects of molybdenum dithiocarbamate and zinc dialkyl dithiophosphate additives on tribological behaviors of hydrogenated diamond-like carbon coatings08/06/2019
- Delineating the principles controlling polymer formation and topology in zinc(II)- and cadmium(II)-dithiophosphate adducts of diimine-type ligands08/05/2019
- An approach to improve the load-carrying capacity of Zinc dithiophosphate (cas 19210-06-1)08/04/2019
- Chemical and mechanistic interpretation of thermal films formed by dithiophosphates using XANES08/03/2019
- Temperature effects on mechanical properties of Zinc dithiophosphate (cas 19210-06-1) tribofilms08/02/2019
- Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions08/01/2019
- A new insight into the interfacial mechanisms of the tribofilm formed by zinc dialkyl dithiophosphate07/31/2019
- Role of zinc dialkyl dithiophosphate in carbon black induced abrasive wear07/30/2019
-
Health and Chemical more >


