Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions
-
Add time:08/01/2019 Source:sciencedirect.com
Tribological and nanoscale properties of tribofilms from ashless dialkyl dithiophosphates (DDPs) were compared with zinc dialkyl dithiophosphates (ZDDPs) in this study. The tribosurfaces generated from these chemistries were examined using scanning electron microscopy and energy dispersive spectroscopy. The wear debris harvested from the wear tests was examined in a transmission electron microscope in bright field mode with selected area diffraction to examine the crystallinity and nature of the debris particles. Thickness of the tribofilms was measured using the focused ion beam cross-section microscopy indicating that the tribofilms formed by ashless dithiophosphates are significantly thicker than those formed by ZDDP. Nano-mechanical properties of the tribofilms including hardness and reduced modulus, scratch and nano-wear performance of the ashless dithiophosphate were compared to the secondary ZDDP. The overall results indicate that the wear performance of the ashless DDP are comparable or better than when ZDDP is used. The analytical techniques indicate that the tribofilms formed with ashless DDPs are thicker than those formed from ZDDP; however, the hardness and modulus of the tribofilm are lower in the case of ashless DDPs. XANES analysis indicate that in both tribofilms, phosphates are present as short chain phosphates. Ashless DDPs yield iron phosphates while ZDDP yielded a mix of iron and zinc phosphates. Both tribofilms have greater proportion of phosphates compared to sulfur species. The sulfur near the surface is mostly in the form of sulfates while the material in the interior is a mixture of sulfates and sulfides.
We also recommend Trading Suppliers and Manufacturers of Zinc dithiophosphate (cas 19210-06-1). Pls Click Website Link as below: cas 19210-06-1 suppliers
Prev:A new insight into the interfacial mechanisms of the tribofilm formed by zinc dialkyl dithiophosphate
Next:Temperature effects on mechanical properties of Zinc dithiophosphate (cas 19210-06-1) tribofilms) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Structural determination of Zinc dithiophosphate (cas 19210-06-1)s in lubricating oils by gas chromatography–mass spectrometry with electron impact and electron-capture negative ion chemical ionization08/07/2019
- Effects of molybdenum dithiocarbamate and zinc dialkyl dithiophosphate additives on tribological behaviors of hydrogenated diamond-like carbon coatings08/06/2019
- Delineating the principles controlling polymer formation and topology in zinc(II)- and cadmium(II)-dithiophosphate adducts of diimine-type ligands08/05/2019
- An approach to improve the load-carrying capacity of Zinc dithiophosphate (cas 19210-06-1)08/04/2019
- Chemical and mechanistic interpretation of thermal films formed by dithiophosphates using XANES08/03/2019
- Temperature effects on mechanical properties of Zinc dithiophosphate (cas 19210-06-1) tribofilms08/02/2019
- A new insight into the interfacial mechanisms of the tribofilm formed by zinc dialkyl dithiophosphate07/31/2019
- Role of zinc dialkyl dithiophosphate in carbon black induced abrasive wear07/30/2019
- Experimental observation of zinc dialkyl dithiophosphate (ZDDP)-induced iron sulphide formation07/29/2019
-
Health and Chemical more >


