Determination of semi-empirical relationship between the manganese and hydrogen atoms ratio, physical density and concentration in an aqueous solution of manganese sulphate

Add time:08/02/2019    Source:sciencedirect.com

The Manganese sulphate solution has been used for neutron metrology through the method of Manganese Bath. This method uses physical parameters of manganese sulphate solution to obtain its corrections. This work established a functional relationship, using the gravimetric method, between those physical parameters: density, concentration and hydrogen to manganese ratio. Comparisons were done between manganese sulphate solution concentration from the Manganese Bath system of Laboratory of Metrology of Ionising Radiation and estimated values from the functional relationship obtained, showing percentage difference of less than 0.1%. This result demonstrates the usefulness in the correlation of the physical values of the solution to the MB.

We also recommend Trading Suppliers and Manufacturers of MANGANESE SULFATE, MONOHYDRATE (cas 15244-36-7). Pls Click Website Link as below: cas 15244-36-7 suppliers

Prev:On the thermal stability of manganese(II) sulfate and its reaction with zeolite A to form the sodalite Na6Mn2[Al6Si6O24](SO4)2
Next:Measurement and correlation of phase equilibria in aqueous two-phase systems containing polyethyleneglycol (2 000, 4 000, and 6 000) and sulfate salts (manganese sulfate and copper sulfate) at different temperatures (298.15, 318.15, and 338.15 K))