Thermodynamic study of direct amination of ISOBUTYLENE (cas 115-11-7) to tert-butylamine
-
Add time:07/12/2019 Source:sciencedirect.com
On basis of thermodynamic empirical equations, the thermodynamic parameters for the direct amination of ISOBUTYLENE (cas 115-11-7) to tert-butylamine, an atomically economic and green chemical reaction, were calculated. In particular, the equilibrium conversion of isobutylene under various reaction conditions close to those used in industry was calculated and discussed. Isobutylene amination is a temperature sensitive reaction due to its exothermic nature and isobutylene equilibrium conversion decreases with temperature. However, kinetically, the amination reaction will be faster at a higher temperature. Thus, there must be an optimum temperature for the reaction. A high pressure and n(NH3)/n(i-C4H8) molar ratio promote the transformation of isobutylene to tert-butylamine. Developing a highly efficient catalyst under mild reaction conditions is preferred for the amination process. The reaction was investigated over a series of acidic zeolites. ZSM-11 zeolite exhibited the best performance with 14.2% isobutylene conversion (52.2% of the equilibrium conversion) and > 99.0% tert-butylamine selectivity. The effect of reaction conditions on the performance of the ZSM-11 catalyst agreed with the thermodynamic results, which provides guidance for further catalyst development and reaction condition optimization.
We also recommend Trading Suppliers and Manufacturers of ISOBUTYLENE (cas 115-11-7). Pls Click Website Link as below: cas 115-11-7 suppliers
Prev:A wood-rot fungus-mediated production of ISOBUTYLENE (cas 115-11-7) from isobutanol
Next:Direct amination of ISOBUTYLENE (cas 115-11-7) over zeolite catalysts with various topologies and acidities) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Polymerization of ISOBUTYLENE (cas 115-11-7) and copolymerization of ISOBUTYLENE (cas 115-11-7) with isoprene promoted by methylalumoxane07/21/2019
- Quest for pore size effect on the catalytic property of defect-engineered MOF-808-SO4 in the addition reaction of ISOBUTYLENE (cas 115-11-7) with ethylene glycol07/19/2019
- Modeling the effects of lipid contamination in poly(styrene-ISOBUTYLENE (cas 115-11-7)-styrene) (SIBS)07/18/2019
- Arc-bridge Polydimethylsiloxane Grafted Graphene Incorporation into Quaternized Poly(styrene-b-ISOBUTYLENE (cas 115-11-7)-b-styrene) for Construction of Anion Exchange Membranes07/17/2019
- Aqueous gelcasting of solid-state-sintered SiC ceramics with the addition of the copolymer of ISOBUTYLENE (cas 115-11-7) and maleic anhydride07/16/2019
- Effect of Si/Al ratio of high-silica HZSM-5 catalysts on the prins condensation of ISOBUTYLENE (cas 115-11-7) and formaldehyde to isoprene07/15/2019
- Addition and abstraction kinetics of H atom with propylene and ISOBUTYLENE (cas 115-11-7) between 200 and 2500 K: A DFT study07/14/2019
- Direct amination of ISOBUTYLENE (cas 115-11-7) over zeolite catalysts with various topologies and acidities07/13/2019
- A wood-rot fungus-mediated production of ISOBUTYLENE (cas 115-11-7) from isobutanol07/11/2019