Effect of Si/Al ratio of high-silica HZSM-5 catalysts on the prins condensation of ISOBUTYLENE (cas 115-11-7) and formaldehyde to isoprene
-
Add time:07/15/2019 Source:sciencedirect.com
A series of HZSM-5 catalysts with different Si/Al ratio were prepared and characterized with various characteristic methods XRD, BET, NH3-TPD, FT-IR spectra of adsorbed pyridine, etc. The effect of Si/Al ratio of HZSM-5 catalysts on the prins condensation of ISOBUTYLENE (cas 115-11-7) and formaldehyde to isoprene was investigated in detail. It is resulted that the catalytic activities are dependent on the acid strength, decreasing with the ratio of Si/Al increases. The optimized catalyst was HZSM-5 (600) with 8.8% of isobutene conversion and 90.2% of selectivity to isoprene, indicating that the higher Si/Al ratio was termed as appropriate for prins condensation of isobutylene and formaldehyde to isoprene. On the contrary, the low Si/Al ratio may lead to the formation of by-products and coke deposits, which leads the catalysts deactivation.
We also recommend Trading Suppliers and Manufacturers of ISOBUTYLENE (cas 115-11-7). Pls Click Website Link as below: cas 115-11-7 suppliers
Prev:Addition and abstraction kinetics of H atom with propylene and ISOBUTYLENE (cas 115-11-7) between 200 and 2500 K: A DFT study
Next:Aqueous gelcasting of solid-state-sintered SiC ceramics with the addition of the copolymer of ISOBUTYLENE (cas 115-11-7) and maleic anhydride) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Polymerization of ISOBUTYLENE (cas 115-11-7) and copolymerization of ISOBUTYLENE (cas 115-11-7) with isoprene promoted by methylalumoxane07/21/2019
- Quest for pore size effect on the catalytic property of defect-engineered MOF-808-SO4 in the addition reaction of ISOBUTYLENE (cas 115-11-7) with ethylene glycol07/19/2019
- Modeling the effects of lipid contamination in poly(styrene-ISOBUTYLENE (cas 115-11-7)-styrene) (SIBS)07/18/2019
- Arc-bridge Polydimethylsiloxane Grafted Graphene Incorporation into Quaternized Poly(styrene-b-ISOBUTYLENE (cas 115-11-7)-b-styrene) for Construction of Anion Exchange Membranes07/17/2019
- Aqueous gelcasting of solid-state-sintered SiC ceramics with the addition of the copolymer of ISOBUTYLENE (cas 115-11-7) and maleic anhydride07/16/2019
- Addition and abstraction kinetics of H atom with propylene and ISOBUTYLENE (cas 115-11-7) between 200 and 2500 K: A DFT study07/14/2019
- Direct amination of ISOBUTYLENE (cas 115-11-7) over zeolite catalysts with various topologies and acidities07/13/2019
- Thermodynamic study of direct amination of ISOBUTYLENE (cas 115-11-7) to tert-butylamine07/12/2019
- A wood-rot fungus-mediated production of ISOBUTYLENE (cas 115-11-7) from isobutanol07/11/2019