Characterization of Hydroxyapatite (cas 1306-06-5) from eggshell waste and polycaprolactone (PCL) composite for scaffold material
-
Add time:08/14/2019 Source:sciencedirect.com
Hydroxyapatite (cas 1306-06-5) was successfully synthesized from eggshell waste. In addition, 10, 20, and 30 wt% hydroxyapatite/polycaprolactone (PCL) composites were prepared. The composites were prepared by dispersing hydroxyapatite particles in PCL. The structural properties of the composites were characterized by Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The results confirmed the presence of hydroxyapatite in the samples. The FTIR spectra showed P–O stretching peaks; the XRD patterns revealed the formation of the hydroxyapatite crystalline phase. Moreover, the thermal stabilities of the hydroxyapatite/PCL composites were higher that of pristine PCL, as revealed by thermogravimetric analysis. The higher thermal stabilities of the composites were attributed to the presence of hydroxyapatite; the composites were stable up to 300 °C. The melting temperatures of the composites were slightly higher than that of pristine PCL. In addition, scanning electron microscopy and elemental mapping were performed to investigate the morphological properties of the composites and the presence of hydroxyapatite in them. The results revealed that hydroxyapatite was present on the surface of PCL. Moreover, compared to pristine PCL, the composite samples exhibited superior swelling behaviors and lower degradation percentages. Preliminary experiment of cell cytotoxicity was observed. It presented the excellent properties to Saos-2 cell.
We also recommend Trading Suppliers and Manufacturers of Hydroxyapatite (cas 1306-06-5). Pls Click Website Link as below: cas 1306-06-5 suppliers
Prev:Synthesis and properties of alumina-Hydroxyapatite (cas 1306-06-5) composites from natural phosphate for phenol removal from water
Next:Effect of fluorine substitution on sintering behaviour, mechanical and bioactivity of Hydroxyapatite (cas 1306-06-5)) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Biosynthesis and characterization of Hydroxyapatite (cas 1306-06-5) and its composite (Hydroxyapatite (cas 1306-06-5)-gelatin-chitosan-fibrin-bone ash) for bone tissue engineering applications08/19/2019
- Painting method for Hydroxyapatite (cas 1306-06-5) coating on titanium substrate08/18/2019
- Design and fabrication of pyrolytic carbon-SiC-fluoridated Hydroxyapatite (cas 1306-06-5)-Hydroxyapatite (cas 1306-06-5) multilayered coating on carbon fibers08/17/2019
- Qualitative analysis on crystal growth of synthetic Hydroxyapatite (cas 1306-06-5) influenced by fluoride concentration08/16/2019
- Effect of fluorine substitution on sintering behaviour, mechanical and bioactivity of Hydroxyapatite (cas 1306-06-5)08/15/2019
- Synthesis and properties of alumina-Hydroxyapatite (cas 1306-06-5) composites from natural phosphate for phenol removal from water08/13/2019
- Impact of morphology-influencing factors in lecithin-based Hydroxyapatite (cas 1306-06-5) precipitation08/12/2019
- Microwave assisted synthesis of biomorphic Hydroxyapatite (cas 1306-06-5)08/11/2019
- Effects of MoOx modification on photocatalytic activity of Hydroxyapatite (cas 1306-06-5) and Ti-doped Hydroxyapatite (cas 1306-06-5)08/10/2019