ArticleThe CO2 absorption and desorption performance of the Triethylenetetramine (cas 112-24-3) + N,N-diethylethanolamine + H2O system☆
-
Add time:08/29/2019 Source:sciencedirect.com
Post-combustion CO2 capture (PCC) process faces significant challenge of high regeneration energy consumption. Biphasic absorbent is a promising alternative candidate which could significantly reduce the regeneration energy consumption because only the CO2-concentrated phase should be regenerated. In this work, aqueous solutions of triethylenetetramine (TETA) and N,N-diethylethanolamine (DEEA) are found to be efficient biphasic absorbents of CO2. The effects of the solvent composition, total amine concentration, and temperature on the absorption behavior, as well as the effect of temperature on the desorption behavior of TETA–DEEA–H2O system were investigated. An aqueous solution of 1 mol·L− 1 TETA and 4 mol·L− 1 DEEA spontaneously separates into two liquid phases after a certain amount of CO2 is absorbed and it shows high CO2 absorption/desorption performance. About 99.4% of the absorbed CO2 is found in the lower phase, which corresponds to a CO2 absorption capacity of 3.44 mol·kg− 1. The appropriate absorption and desorption temperatures are found to be 30 °C and 90 °C, respectively. The thermal analysis indicates that the heat of absorption of the 1 mol·L− 1 TETA and 4 mol·L− 1 DEEA solution is − 84.38 kJ·(mol CO2)− 1 which is 6.92 kJ·(mol CO2)− 1 less than that of aqueous MEA. The reaction heat, sensible heat, and the vaporization heat of the TETA–DEEA–H2O system are lower than that of the aqueous MEA, while its CO2 capacity is higher. Thus the TETA–DEEA–H2O system is potentially a better absorbent for the post-combustion CO2 capture process.
We also recommend Trading Suppliers and Manufacturers of Triethylenetetramine (cas 112-24-3). Pls Click Website Link as below: cas 112-24-3 suppliers
Prev:Research articleImprovement of polyvinyl chloride nanofiltration membranes by incorporation of multiwalled carbon nanotubes modified with Triethylenetetramine (cas 112-24-3) to use in treatment of dye wastewater
Next:NoteA hybrid of hexakis(hexyloxy) triphenylene and synthetic saponite) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Research articleImprovement of polyvinyl chloride nanofiltration membranes by incorporation of multiwalled carbon nanotubes modified with Triethylenetetramine (cas 112-24-3) to use in treatment of dye wastewater08/28/2019
- Full Length ArticleCytocompatibility of polyethylene grafted with Triethylenetetramine (cas 112-24-3) functionalized carbon nanoparticles08/27/2019
- Triethylenetetramine (cas 112-24-3) promoted rGO-Fe3O4 nanocomposites for highly efficient Fenton-like reaction08/26/2019
- Full Length ArticleGraphene/Si solar cells employing Triethylenetetramine (cas 112-24-3) dopant and polymethylmethacrylate antireflection layer08/25/2019
- Water-dispersible Triethylenetetramine (cas 112-24-3)-functionalized graphene: Preparation, characterization and application as an amperometric glucose sensor08/24/2019
- Data on Triethylenetetramine (cas 112-24-3) effect on steel-rebar corrosion-rate in concrete immersed in 0.5 M H2SO408/23/2019
- Adsorption of Cu2+ and Zn2+ on SBA-15 mesoporous silica functionalized with Triethylenetetramine (cas 112-24-3) chelating agent08/22/2019
- Multicavity Triethylenetetramine (cas 112-24-3)-chitosan/alginate composite beads for enhanced Cr(VI) removal08/21/2019
- Mechanisms of Cu2+, Triethylenetetramine (cas 112-24-3) (TETA), and Cu-TETA sorption on rectorite and its use for metal removal via metal-TETA complexation08/20/2019