Molten salt of lithium bis(fluorosulfonyl)imide (LiFSI)-potassium bis(fluorosulfonyl)imide (KFSI) as electrolyte for the natural graphite/LiFePO4 lithium-ion cell
-
Add time:08/28/2019 Source:sciencedirect.com
The binary eutectic mixture of lithium bis(fluorosulfonyl)imide (LiFSI) and potassium bis(fluorosulfonyl)imide (KFSI) with a molar ratio of xLiFSI: xKFSI = 0.41: 0.59 has been investigated as molten salt electrolyte for natural graphite/LiFePO4 lithium-ion cells at 80 °C. The electrochemical performances of the Li/natural graphite, Li/LiFePO4, and natural graphite/LiFePO4 cells using this molten salt electrolyte have been evaluated, in terms of cycling performances and electrochemical impedance spectra (EIS) at 80 °C. Both the Li/natural graphite and Li/LiFePO4 cells show good cycling performances. The initial specific capacities after conditioning for the natural graphite and LiFePO4 electrodes are 353 and 150 mAh g−1, respectively, and the corresponding capacity retention rates are 98% and 97%, respectively, after 100 cycles at 80 °C, except for a large irreversible capacity (162 mAh g−1) observed for the natural graphite at the first cycle for forming solid electrolyte interface (SEI) film. The natural graphite/LiFePO4 lithium-ion cell using this molten salt electrolyte shows a low capacity in the range of 71–86 mAh g−1, due to the large irreversible capacity (71 mAh g−1) at the first cycle, but it shows a good cycleability after the first cycle, and provides a specific capacity of 71 mAh g−1 after 100 cycles at 80 °C. The variations of cycling performances of these cells can be well correlated with their impedance evolution with cycling.
We also recommend Trading Suppliers and Manufacturers of Lithium Bis(pentafluoroethanesulfonyl)imide (cas 132843-44-8). Pls Click Website Link as below: cas 132843-44-8 suppliers
Prev:Ionic liquids based on (fluorosulfonyl)(pentafluoroethanesulfonyl)imide with various oniums
Next:Comparative study on lithium borates as corrosion inhibitors of aluminum current collector in lithium bis(fluorosulfonyl)imide electrolytes) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Ionic liquids based on bis(2,2,2-trifluoroethoxysulfonyl)imide with various oniums09/03/2019
- Anion effect on lithium electrodeposition from N‐propyl‐N‐methylpyrrolidinium bis(fluorosulfonyl)imide ionic liquid electrolytes09/02/2019
- Lithium bis(fluorosulfonyl)imide (LiFSI) as conducting salt for nonaqueous liquid electrolytes for lithium-ion batteries: Physicochemical and electrochemical properties09/01/2019
- Chemical–physical properties of bis(perfluoroalkylsulfonyl)imide-based ionic liquids08/31/2019
- Lithium bis(fluorosulfonyl)imide/poly(ethylene oxide) polymer electrolyte08/30/2019
- Comparative study on lithium borates as corrosion inhibitors of aluminum current collector in lithium bis(fluorosulfonyl)imide electrolytes08/29/2019
- Ionic liquids based on (fluorosulfonyl)(pentafluoroethanesulfonyl)imide with various oniums08/27/2019
- Glyme-based electrolytes for lithium metal batteries using insertion electrodes: An electrochemical study08/26/2019
- Lithium (fluorosulfonyl)(pentafluoroethylsulfonyl)imide/poly (ethylene oxide) polymer electrolyte: Physical and electrochemical properties08/25/2019
-
Health and Chemical more >


