Production and optimization of bamboo hydrochars for adsorption of Congo red and 2-naphthol

Add time:09/06/2019    Source:sciencedirect.com

Twelve hydrochars were produced from bamboo sawdust for adsorption of Congo red and 2-naphthol. The bamboo hydrochars have Brunauer–Emmett–Teller (BET) surface areas ranging from 2.63 m2/g to 43.07 m2/g, average pore diameters from 3.05 nm to 3.83 nm, pore volumes between 0.02 cm3/g and 0.53 cm3/g, and the surfaces of the hydrochars have diverse functional groups. The physico-chemical properties of the hydrochars critically depend on the hydrothermal conditions. All the hydrochars can adsorb Congo red and 2-naphthol from aqueous solutions, the largest adsorption capacity for Congo red is 33.7 mg/g at the equilibrium concentration of 0.1 mg/mL at 25 °C, and the highest adsorption amount for 2-naphthol is 12.2 mg/g at 25 °C and 0.1 mg/mL. Freundlich model can describe the adsorption isotherms of the both adsorbates slightly better than Langmuir model. These results provide a reference to the production and use of hydrochars as potential adsorbents in wastewater treatment.

We also recommend Trading Suppliers and Manufacturers of Red 2 (cas 1342-14-9). Pls Click Website Link as below: cas 1342-14-9 suppliers

Prev:Research articleThe application of textile sludge adsorbents for the removal of Reactive Red 2 (cas 1342-14-9) dye
Next:Infrared photoreaction of 2-chloroethyltrifluorosilane)