Mesure de la solubilité et de la densité des systèmes eau + bromure de lithium + chlorure de lithium et eau + bromure de lithium + formate de sodium

Add time:10/01/2019    Source:infona.pl

Solubility of aqueous solutions containing lithium bromide + lithium chloride and lithium bromide + sodium formate were measured (LiBr/NaHCO2 = 2 and LiBr/LiCl = 2 by mass ratio) at different temperatures. Visual polythermal method was used in the temperature range of (283.15–340.15) K and mass fraction range of (0.4–0.8). Also density of mentioned systems was reported in the temperature range of (288.15–333.15) K. Each set of experimental measurements were correlated using least-square regression as a function of temperature. Our results indicate that solubility of LiBr + LiCl is higher than LiBr and its density is lower than density of aqueous solution of LiBr.

We also recommend Trading Suppliers and Manufacturers of Sodium formate (cas 141-53-7). Pls Click Website Link as below: cas 141-53-7 suppliers

Prev:Improving the Quality of the Quartz Fiber Postcore Bond Using Sodium ethoxide (cas 141-52-6) Etching and Combined Silane/Adhesive Coupling
Next:Highly efficient hydrogen generation from formic acid-Sodium formate (cas 141-53-7) over monodisperse AgPd nanoparticles at room temperature)