Influence of solution pH on forming silver molybdate (cas 14259-85-9)s obtained by sonochemical method and its application for methylene blue degradation
-
Add time:07/24/2019 Source:sciencedirect.com
Catalytic processes such as heterogenous photocatalysis or adsorptions have been extensively studied due to the difficulty in treating organic effluents, mainly textiles. The catalysts stability is essential to enable their applicability, so that the catalytic converter does not turn into secondary residues after the catalytic cycle, enabling its re-employment in the catalytic process. In this work was studied the photocatalytic activity of different phases of silver molybdates obtained by the sonochemical method at different pH in the medium reaction. The powders were characterized by X-ray diffraction (XRD) field emission scanning electron microscopy (FE-SEM), and diffuse reflectance spectroscopy was used to estimate the Egap of the powders. The photocatalytic activity of the powders was measured by varying the degradation of the methylene blue dye (MB). According to the XRD patterns, the crystalline structure of the obtained silver molybdates changes from Ag2Mo3O10.2H2O at very acidic pH 1 and 2, to pure Ag2Mo2O7 with the values of pH 3 and 4 it is then converted into Ag2Mo2O7 and Ag2MoO4 phases in pH 5, and shifts to pure Ag2MoO4 phase when the pH is increased up to 6. The results indicate that the microstructures of Ag2Mo3O10.2H2O and Ag2Mo2O7 phases have high adsorbent properties, with the powders obtained at pH 1 and 2 being able to completely remove the MB from the solution in 5 min and the powders of Ag2Mo2O7 phases removing up to 90% of MB after 5 min of exposure without UV irradiation. In contrast, the powders with Ag2MoO4 phase showed high photocatalytic properties, being able to removing up to 90% of MB in less than 20 min and 40 min of ultraviolet exposure to powders obtained at pH 5 and 6, respectively. All presented catalysts maintained their stability and performance after 3 test cycles.
We also recommend Trading Suppliers and Manufacturers of molybdate (cas 14259-85-9). Pls Click Website Link as below: cas 14259-85-9 suppliers
Prev:Eu3+ activated molybdate (cas 14259-85-9)s – Structure property relations
Next:Iron-doping as an effective strategy to enhance supercapacitive properties of nickel molybdate (cas 14259-85-9)) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Iron-doping as an effective strategy to enhance supercapacitive properties of nickel molybdate (cas 14259-85-9)07/25/2019
- Eu3+ activated molybdate (cas 14259-85-9)s – Structure property relations07/23/2019
- Leaching kinetics of calcium molybdate (cas 14259-85-9) with hydrochloric acid in presence of phosphoric acid07/22/2019
- Nucleation and morphology of sodium molybdate (cas 14259-85-9) dihydrate from NaOH solution07/20/2019
- molybdate (cas 14259-85-9)-phosphate conversion coatings to protect steel in a simulated concrete pore solution07/21/2019
- Improvement of the corrosion protection of polypyrrole coating for CT3 mild steel with 10-camphorsulfonic acid and molybdate (cas 14259-85-9) as inhibitor dopants07/19/2019
- Water activities of sodium molybdate (cas 14259-85-9) solutions at different temperatures07/18/2019
- High performance of electrocatalytic oxidation in direct glucose fuel cell using molybdate (cas 14259-85-9) nanostructures synthesized by microwave-assisted method07/17/2019
- Efficient supercapattery behavior of mesoporous hydrous and anhydrous cobalt molybdate (cas 14259-85-9) nanostructures07/16/2019


