589-09-3Relevant articles and documents
Preparation and Coordination Properties Including Catalytic Activities of a Bulky 2-Methyl-3-thioxo-1,3-diphosphapropene
Liang, Hongze,Ito, Shigekazu,Yoshifuji, Masaaki
, p. 425 - 427 (2004)
(Matrix presented) 2-Methyl-3,3-diphenyl-3-thioxo-1-(2,4,6-tri-tert- butylphenyl)-1,3-diphosphapropene, which bears a P=C-P=S skeleton, was prepared and used as a ligand of transition-metal complexes. The palladium complexes containing the ligated 3-thioxo-1,3-diphophapropene were stable and used for catalytic reactions such as cross-couplings and direct conversion of allyl alcohol to allylaniline.
Heterobimetallic Eu(iii)/Pt(ii) single-chain nanoparticles: a path to enlighten catalytic reactions
Barner-Kowollik, Christopher,Kn?fel, Nicolai D.,Kulendran, Bragavie,Roesky, Peter W.,Rothfuss, Hannah,Tzvetkova, Pavleta
, p. 10331 - 10336 (2020)
We introduce the formation and characterization of heterometallic single-chain nanoparticles entailing both catalytic and luminescent properties. A terpolymer containing two divergent ligand moieties, phosphines and phosphine oxides, is synthesized and intramolecularly folded into nanoparticlesviaa selective metal complexation of Pt(ii) and Eu(iii). The formation of heterometallic Eu(iii)/Pt(ii) nanoparticles is evidenced by size exclusion chromatography, multinuclear NMR (1H,31P{1H},19F,195Pt) as well as diffusion-ordered NMR and IR spectroscopy. Critically, we demonstrate the activity of the SCNPs as a homogeneous and luminescent catalytic system in the amination reaction of allyl alcohol.
Copper-Catalyzed Allylation of Amines with Cyclopropyldiphenylsulfonium Trifluoromethanesulfonate
Ma, Yu,Tian, Ze-Yu,Zhang, Cheng-Pan,Zheng, Shuang-Yang
, (2022/03/15)
Cyclopropyldiphenylsulfonium salt, a famous ylide precursor previously extensively employed in the preparation of cyclic compounds, has been successfully utilized as an efficient allylation reagent in this work. The copper-catalyzed reactions of cyclopropyldiphenylsulfonium trifluoromethanesulfonate with amines in the presence of an appropriate ligand provided the N-allylated products in good yields. Aliphatic/ aromatic amines and primary/secondary amines were all converted under mild reaction conditions. This protocol was also applicable to N-functionalization of drug molecules, supplying the corresponding N-allylated compounds in satisfactory yields. The reaction, which showed good functional group tolerance with a wide range of substrates and excellent chemoselectivity, offers an interesting method for the synthesis of N-allyl amines.
Copper(i)-catalysed intramolecular hydroarylation-redox cross-dehydrogenative coupling ofN-propargylanilines with phosphites
Li, Guangzhe,Yu, Guo,Wang, Chengdong,Morita, Taiki,Zhang, Xuhai,Nakamura, Hiroyuki
, p. 113 - 116 (2021/12/29)
Intramolecular hydroarylation-redox cross-dehydrogenative coupling ofN-propargylanilines with phosphite diesters proceeded in the presence of Cu(i)-catalysts (20 mol%) to selectively give 2-phosphono-1,2,3,4-tetrahydroquinolines in good yields with 100% atomic utilization. P-H and two C-H bonds are activated at once and these hydrogen atoms are trapped by a propargylic triple bond in the molecule.
Chitosan nanoparticles functionalized poly-2-hydroxyaniline supported CuO nanoparticles: An efficient heterogeneous and recyclable nanocatalyst for N-arylation of amines with phenylboronic acid at ambient temperature
Seyedi, Neda,Zahedifar, Mahboobeh
, (2021/07/25)
The present study aims to prepare an effective and eco-friendly nanocatalyst for the Chan–Lam coupling reaction of phenylboronic acid and amine in aerobic conditions. For this purpose, chitosan was extracted from shrimp shells waste by demineralization, deproteinization, and deacetylation processes and then converted to chitosan nanoparticles (CSN) by the ionic gelation with tripolyphosphate anions. Afterward, poly-2-hydroxyaniline (P2-HA) was grafted to chitosan nanoparticles (NPs) to employ as the support for CuO NPs. Characterization of the nanocatalyst was done using Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), mapping, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The CuO NPs were identified in the spherical shape with an average size of 17 nm. The prepared nanocatalyst exhibited excellent catalytic performance with a high turnover number (TON) and turnover frequency (TOF) for the Chan–Lam coupling reaction of phenyl boronic acid and amines with different electronic properties. The prepared catalyst could be readily recovered and reused for at least five runs without any noticeable change in structure and catalytic performance. Chitosan (CS) was prepared via demineralization, deproteinization, and deacetylation of shrimp shell and chitosan nanoparticles (CSN) were prepared via ionic gelation process. Polymerization of 2-HA on the CSN surface was done to increase functional groups and create active sites for CuO NPs attachments. CuO NPs-P2-HA-CSN nanocomposite has been shown high efficiently for the Chan–Lam coupling reaction.
Regioselective Radical Arene Amination for the Concise Synthesis ofortho-Phenylenediamines
Gillespie, James E.,Morrill, Charlotte,Phipps, Robert J.
supporting information, p. 9355 - 9360 (2021/07/19)
The formation of arene C-N bonds directly from C-H bonds is of great importance and there has been rapid recent development of methods for achieving this through radical mechanisms, often involving reactiveN-centered radicals. A major challenge associated with these advances is that of regiocontrol, with mixtures of regioisomeric products obtained in most protocols, limiting broader utility. We have designed a system that utilizes attractive noncovalent interactions between an anionic substrate and an incoming radical cation in order to guide the latter to the areneorthoposition. The anionic substrate takes the form of a sulfamate-protected aniline and telescoped cleavage of the sulfamate group after amination leads directly toortho-phenylenediamines, key building blocks for a range of medicinally relevant diazoles. Our method can deliver both free amines and monoalkyl amines allowing access to unsymmetrical, selectively monoalkylated benzimidazoles and benzotriazoles. As well as providing concise access to valuableortho-phenylenediamines, this work demonstrates the potential for utilizing noncovalent interactions to control positional selectivity in radical reactions.
Fused ring compound and preparation method thereof
-
Paragraph 0052; 0056-0057, (2021/09/21)
The invention provides a fused ring compound and a preparation method thereof. In the method, precursor compounds A and B prepared under the conditions of triethylamine as a base, DMF as a solvent andpalladium acetate and triphenylphosphine as a catalyst react to generate a series of new fused ring compounds with a unique stereoselectivity. Compared with the conventional fused ring compound, thefused ring compound prepared by the invention has a more complicated structure, a mild reaction condition and a high reaction yield. The fused ring compound also shows a broader prospect of use in chemical production and clinical medicine.
Nickel-Catalyzed Aminofluoroalkylation of Alkenes: Access to Difluoroalkylated N-Containing Heterocyclic Compounds
Fu, Xiaoyi,Sun, Yijie,Wu, Fanhong,Wu, Jingjing,Zhang, Tianyu
supporting information, (2021/12/03)
A nickel-catalyzed aminofluoroalkylative cyclization of unactive alkenes with iododifluoromethyl ketones was developed to construct versatile difluoroalkylated Nitrogen-containing heterocycles including aziridines, pyrrolidines and piperidines in moderate to high yields. This method features a broad substrate scope and has been demonstrated on gram scale.
Generalized Chemoselective Transfer Hydrogenation/Hydrodeuteration
Wang, Yong,Cao, Xinyi,Zhao, Leyao,Pi, Chao,Ji, Jingfei,Cui, Xiuling,Wu, Yangjie
supporting information, p. 4119 - 4129 (2020/08/10)
A generalized, simple and efficient transfer hydrogenation of unsaturated bonds has been developed using HBPin and various proton reagents as hydrogen sources. The substrates, including alkenes, alkynes, aromatic heterocycles, aldehydes, ketones, imines, azo, nitro, epoxy and nitrile compounds, are all applied to this catalytic system. Various groups, which cannot survive under the Pd/C/H2 combination, are tolerated. The activity of the reactants was studied and the trends are as follows: styrene'diphenylmethanimine'benzaldehyde'azobenzene'nitrobenzene'quinoline'acetophenone'benzonitrile. Substrates bearing two or more different unsaturated bonds were also investigated and transfer hydrogenation occurred with excellent chemoselectivity. Nano-palladium catalyst in situ generated from Pd(OAc)2 and HBPin extremely improved the TH efficiency. Furthermore, chemoselective anti-Markovnikov hydrodeuteration of terminal aromatic olefins was achieved using D2O and HBPin via in situ HD generation and discrimination. (Figure presented.).
On the Virtue of Indium in Reduction Reactions. A Comparison of Reductions Mediated by Indium and Zinc: Is Indium Metal an Effective Catalyst for Zinc Induced Reductions?
Matassini, Camilla,Bonanni, Marco,Marradi, Marco,Cicchi, Stefano,Goti, Andrea
supporting information, p. 1106 - 1113 (2019/12/24)
Indium(0)-mediated reductions have been reported for the transformation of several functional groups (imines, oximes, nitro groups, isoxazolidines, and conjugated alkenes, among others), prompted by the opportunity of performing the reactions in aqueous media and green conditions. We describe here the comparison of several reactions using indium or the less expensive zinc, carried out in order to evaluate the effective advantages brought about indium metal. We found some reactions for which use of In is mandatory and others where Zn worked equally well or even better. The reduction of hydroxylamines to the corresponding amines was the only reduction for which use of In provided much better results than Zn and was also possible to apply an efficient catalytic version with use of 2–5 mol-% In in the presence of stoichiometric Zn. Applicability of this catalytic reduction to “one-pot” model processes is also demonstrated.
