Welcome to LookChem.com Sign In|Join Free

CAS

  • or

1134-47-0

Post Buying Request

1134-47-0 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

1134-47-0 Usage

Antispasmodic drugs

Baclofen is a γ-aminobutyric acid derivative. It is an antispasmodics class drugs acting on the central nervous system, the brain and spinal cord as a skeletal muscle relaxants and sedatives. It take antispasmodic effect by stimulating receptors to inhibit the release of excitatory amino acids such as glutamic acid, aspartic acid and thereby inhibiting the transfer of single and multi-synaptic reflex in central nervous system, brain and spinal cord. Clinically it has already been used as racemic agent for treating Muscle spasticity since mid-1960s. Recent studies have also found that this product can significantly reduce the symptoms of gastroesophageal reflux and alleviating related symptoms. It can also alleviate the dystonia of children and treat the urination dysfunction caused by central spinal cord injury. In addition, the intrathecal injection therapy of the product in clinical application can further improve the clinical efficacy, and make it possible to adjust drugs dosage which stabilizes the treatment effect. For the past 10 years, the clinical application of central muscle relaxant baclofen has made significant progress, particularly in accumulating a lot of experiences in the neurological rehabilitation treatment of reducing muscular tension and pain alleviation treatment. Figure 1 Structure of Baclofen

Mechanisms of action

The content of γ-aminobutyric acid (GABA) is very high in the human central nervous system, brain and spinal cord. Its level is 1000 times higher than monoamine such as catecholamines, to higher norepinephrine, and dopamine. It is presented at the highest inside the substantia nigra and globus pallidus. There are about 20% to 40% of the synapses using GABA as neurotransmitter inside the brain. GABA is the major inhibitory neurotransmitter of the central nervous system, brain and spinal cord. However, it is not able to penetrate the blood-brain barrier. GABA can be converted into baclofen by connecting carbon atom to the p-chlorophenyl. In this case, it changes from hydrophilic substance to lipophilic substances, which can then go through the blood-brain barrier. The main effect of this product are stimulating the GABA receptors, inhibiting the release of excitatory amino acids such as aspartic acid, glutamic acid, also cause the efflux of K +, Ca 2+ , which results in hyper-polarization, reducing the transfer single and multi-synaptic reflex, maintaining the normal function of middle-neuronal activity in order to reduce the activity of motor neurons, thereby alleviating skeletal muscle spasticity caused by damage to the pyramidal tract, reducing muscle tension, and promoting sports functional recovery. The above information is edited by the lookchem of Dai Xiongfeng.

Production process

Chlorobenzaldehyde and ethyl acetoacetate are condensed into chlorobenzene methylene-bis-ethyl acetoacetate. Heat and hydrolyze to obtain chlorophenyl glutaric acid. Use acetic anhydride for dehydration and cyclization to obtain chlorophenyl glutaric anhydride. And then perform amination reaction by concentrated aqueous ammonia to generate chlorophenyl glutaric acid imide. The open the ring, degrade to obtain the final product.

Pharmacokinetics

After oral administration, concentration in plasma reaches a peak in about 1.9h. There is large fluctuation in plasma concentration with the maximum concentration/minimum concentration × 100%: 188-439%. The total clearance rate is about 175mL.min-1, and the apparent renal clearance crisp is the same as that of muscle. The plasma protein binding rate is 35%. The excretion rate of kidney prototype drug is 65%, which is consistent with healthy results. Because renal excretion is the major route of elimination, patients with renal impairment should pay attention to adjust the dose.

Indications

This product is an antispasmodic drug. It inhibits the transmission in spinal cord of mono-synapse multiple synapse. The mechanism is inhibiting the release of excitatory amino acid glutamate and aspartate through stimulating GABA receptor. Thus reduce the increased limbs muscle tension caused by spinal cord lesions, multiple sclerosis, and spinal cord injury. It can be used for treatment of muscle spasms caused by brain and spinal cord diseases or injuries.

Precautions

1. Among the overdose behavior, the depression of central nervous system is the most prominent. Severe poisoning manifestations include seizures, coma, respiratory depression and muscle hypotonia associated with loss of reflexes of the limbs, and also hypotension and low blood pressure sometimes. Strategies for emergence treatment of acute poisoning include respiratory support, gastric lavage, and diuretic. However, there is no special antidote reported. There are some reports that seizures and myoclonic seizures appeared in some patients appear during the recovery period. Epileptic seizure can be treated by diazepam or clonazepam, although these drugs can cause extension of the duration of unconsciousness. Patients of cardiovascular disease should be carefully observed for 1 week to monitor delayed tachycardia and hypertension. 2. Patients who are allergic to the drug, suffering Parkinson's disease, spasms, and the women who are in the first three months of pregnancy are not allowed for using. 3. Patients of hypertension, peptic ulcer disease, cerebrovascular disease and respiratory, issue liver and kidney dysfunction, who have a history of seizures or convulsions, accompanied by mental disorders, schizophrenia or confusion, pregnant and lactating women, drivers or operator of machine should use with caution. 4. Epileptic patients should be controlled of the attack of epilepsy when applying this drug. Also they should do EEG monitoring. 5. Gradually reduce the dosage before the withdrawal, to prevent rebound phenomenon.

Side effects

Different sources of media describe the Side effects of 1134-47-0 differently. You can refer to the following data:
1. The main side effects mainly happen at the beginning of treatment when the dose increases too fast, when overdose happens and for elderly patients. It is mainly mild transient symptoms, Patients with historical mental illness and elderly patients with cerebral vascular disease may suffer from an even more severe adverse reaction. During the beginning of treatment, there are often some side effects such as daytime sedation, drowsiness and nausea.
2. Side effects are not a major problem, and they can be minimized by graduated dosage increases.They include lassitude, slight nausea, and mental disturbances (in including confusion, euphoria, and depression). The drowsiness is less pronounced than that produced by diazepam—an important therapeutic advantage. Hypotension has been noted, particularly following overdose. Elderly patients and patients with multiple sclerosis may require lower doses and may display increased sensitivity to the central side effects. Baclofen may increase the frequency of seizures in epileptics.

Dosage and usage

Oral: adult, Initial amount of 5mg per time, tid, then every increase taking this amount every 3d until it reaches the appropriate dose 30~75mg/d. Take this in 3 times. The dose should not exceed 80 mg/d except in special cases. Gradually reduce the dosage before withdrawal; For children, the initial amount should be 0.3mg/(kg.d), and the maintenance dose should be 0.75~2mg/(kg.d). For children under 10 years-old, the maximum dose should be 2.5mg /(kg.d). The recommended daily amount for maintenance therapy: 1 to 2 years-old, 10~20mg, 2~10 years-old: 30~60mg (maximum 70mg), take it with meal or with milk.

Chemical Properties

Different sources of media describe the Chemical Properties of 1134-47-0 differently. You can refer to the following data:
1. White powder. Melting point: 206-208 °C. Dissolve using hot water, the aqueous solution was neutral, almost insoluble in alcohol, ether, acetone and other organic solvents, easily soluble in acidic, alkaline aqueous solution. The melting point of Chlorobenzene aminobutyric acid hydrochloride: 179-181 °C.
2. Off-White Solid

Uses

Different sources of media describe the Uses of 1134-47-0 differently. You can refer to the following data:
1. 1. The product is a relaxant and antispasmodic agent acting on the skeletal muscle of spinal cord. Suitable for treating multiple-sclerosis bones spasms, spinal infection, degenerated muscle spasms; spinal cord trauma, and neoplastic muscle spasms. 2. It is currently the most effective muscle relaxants with least side effects.
2. Specific GABA-B receptor agonist. Muscle relaxant (skeletal)
3. Baclofen may be used as a pharmaceutical secondary reference standard for the determination of the analyte in plasma samples by liquid chromatography tandem mass spectrometry and tablet formulations by UV spectroscopy, respectively.
4. (±)-Baclofen has been used as γ-aminobutyric acid receptor B GABAB?receptor agonist: as well as control GABAergic drug to test its protective effects on 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced dopaminergic toxicityto test its effects on in vivo motor function tests and performance of mutant miceto test its excitability effect on dopaminergic (DA) neurons of the ventral tegmental area (VTA) to test its effect in reducing dendritic excitability in Purkinje neurons

Production method

Chlorobenzaldehyde and ethyl acetoacetate is condensed into chlorobenzene methylene-bis-ethyl acetoacetate. Add heating water for hydrolysis to obtain chlorophenyl glutaric acid. Dehydrate and cyclize to obtain chlorophenyl glutaric anhydride using acetic anhydride. Then perform amination reaction with concentrated aqueous ammonia to generate chlorophenyl glutaric acid imide. The open the ring, degrade to obtain the final product. Detailed procedures as follow: Add 42.25g β-(p-chlorophenyl) glutaric acid imide with stir to 200 mL aqueous solution containing 8.32g of sodium hydroxide. The mixture was heated at 50 °C for 10min, cool to 10-15 °C. Titrate for 200 mL aqueous solution of 40.9g of sodium hydroxide. After 20min, add 38.8g bromine, stir at 20-25 °C for 8h. Use concentrated hydrochloric acid to adjust the pH of the reaction solution to 7, and then precipitate out the fine crystals of i.e. [beta] (p-chlorophenyl) amino-gamma-acid. Re-crystallize in water with m.p. 206-208 °C.

Category

toxic substances

Toxicity grading

highly toxic

Acute toxicity

Oral-rat LD50; 145 mg/kg; Oral-Mouse LD50: 200 mg/kg.

Flammability and hazardous characteristics

Combustible, Burning yields toxic chloride fumes and nitrogen oxides; Patients takes with side effects: low blood pressure, pulse rate decreases, muscle weakness.

Storage Characteristics

ventilation, low-temperature and dry; and Separate from food raw materials for storage.

Extinguishing agent

Dry powder, foam, sand, carbon dioxide, water spray.

Originator

Lioresal,Ciba Geigy,Switz.,1971

Definition

ChEBI: A monocarboxylic acid that is butanoic acid substituted by an amino group at position 4 and a 4-chlorophenyl group at position 3. It acts as a central nervous system depressant, GABA agonist and muscle relaxant.

Manufacturing Process

42.45 g of β-(p-chlorophenyl)glutaric acid imide are stirred into a solution of 8.32 g of sodium hydroxide in 200 ml of water. The mixture is heated for 10 minutes at 50°C, and the solution thus formed is cooled to 10° to 15°C. At this temperature there are then added dropwise a solution of 40.9 g of sodium hydroxide in 200 ml of water and then, in the course of 20 minutes, 38.8 g of bromine. When all has been dropped in, the batch is stirred for 8 hours at 20° to 25°C. The reaction solution is then cautiously adjusted with concentrated hydrochloric acid to pH 7, whereupon finely crystalline γ-amino- β-(p-chlorophenyl)butyric acid settles out. To purify it, it is recrystallized from water. Melting point is 206°to 208°C.

Brand name

Kemstro (Schwarz Pharma); Lioresal (Medtronic); Lioresal (Novartis).

Therapeutic Function

Muscle relaxant

Biological Functions

Baclofen (Lioresal) is the parachlorophenol analogue of the naturally occurring neurotransmitter γ-aminobutyric acid (GABA).

General Description

Odorless or practically odorless white to off-white crystalline powder.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

Baclofen is an amine. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.

Health Hazard

SYMPTOMS: Symptoms of exposure to Baclofen via ingestion may include drowsiness, insomnia, dizziness, weakness, mental confusion, nausea, constipation, anorexia, urinary retention, impotence, nystagmus, diplopia and incoordination. Ingestion may lead to cholinergic effects and lassitude. It may also lead to ataxia. Other symptoms due to ingestion may include impaired renal function, fatigue, headache, hypotension, urinary frequency, rash, pruritis, ankle edema, excessive perspiration, weight gain, nasal congestion, and rarely, euphoria, excitement, depression, hallucinations, paresthesia, muscle pain, tinnitus, slurred speech, tremor, rigidity, dystonia, blurred vision, strabismus, miosis, mydriasis, dysarthia, epileptic seizure, dyspnea, palpitation, chest pain, syncope, dryness of the mouth, taste disorder, abdominal pain, vomiting, diarrhea, blood in the stools, enuresis, dysuria, inability to ejaculate, nocturia and hematuria. Overexposure through ingestion may result in seizures, and coma with respiratory depression. Aspiration pneumonia is a frequent complication of coma with respiratory depression. Other symptoms due to overdosage may include vomiting, muscular hypotonia, drowsiness, and accommodation disorders. Cyanosis has been reported. Chronic ingestion may result in drowsiness, depression, weakness, anxiety, ataxia, headaches, blurred vision, gastric upset and pruritic skin rashes characterized by urticaria or erythematous macular eruptions. Sudden withdrawal after chronic ingestion may cause auditory and visual hallucinations, anxiety and tachycardia. Seizures may also occur after sudden withdrawal. Abuse may lead to drug dependence.

Fire Hazard

Flash point data for Baclofen are not available. Baclofen is probably combustible.

Biological Activity

Selective GABA B receptor agonist. Skeletal muscle relaxant.

Biochem/physiol Actions

Baclofen, a γ-aminobutyric acid (GABA) analog, possesses myorelaxant properties Being a γ-aminobutyric acid receptor B (GABAB) agonist, baclofen may be involved in the potentiation of dendritic potassium K+?channels. It may be useful in blocking transient lower esophageal sphincter relaxation (TLESR)?in gastroesophageal reflux disease (GERD). Baclofen may also have scope for treating addictive especially, in alcohol use disorder (AUD).

Mechanism of action

Baclofen appears to affect the neuromuscular axis by acting directly on sensory afferents, γ-motor neurons, and collateral neurons in the spinal cord to inhibit both monosynaptic and polysynaptic reflexes. The principal effect is to reduce the release of excitatory neurotransmitters by activation of presynaptic GABAB receptors. This seems to involve a G protein and second-messenger link that either increases K+ conductance or decreases Ca++ conductance.

Clinical Use

Baclofen is an agent of choice for treating spinal spasticity and spasticity associated with multiple sclerosis. It is not useful for treating spasticity of supraspinal origin. Doses should be increased gradually to a maximum of 100 to 150 mg per day, divided into four doses.

Safety Profile

Poison by ingestion,subcutaneous and intravenous routes. Human systemiceffects by ingestion: blood pressure lowering, coma,muscle weakness, pulse rate decrease, respiratorydepression. When heated to decomposition it emits toxicfumes of Cl-

Synthesis

Baclofen, 4-amino-3-(4-chlorophenyl)butyric acid (15.3.5), is synthesized in two ways. According to the first, 4-chlorobenzaldehyde is condensed with two moles of acetoacetic ester, giving the product (15.3.1), which initially undergoes alkaline hydrolysis and decarboxylation forming 3-(4-chlorphenyl)glutaric acid (15.3.2). Dehydration of this gives 3-(4-chlorophenyl)glutaric acid anhydride (15.3.3), and further treatment with ammonia gives the corresponding glutarimide (15.3.4). Reacting this with an alkaline solution of a halogen (Hofmann rearrangement) gives baclofen (15.3.6).

Veterinary Drugs and Treatments

Baclofen may be useful to decrease urethral resistance in dogs to treat urinary retention. It is not recommended for cats.

in vitro

(±)-baclofen dampened cell growth in human hepatocellular carcinoma (hcc) cells in a dose-dependent manner. (±)-baclofen also caused cell cycle arrest at g0/g1 phase without inducing cell death. additionally, (±)-baclofen-evoked hcc cells proliferation was associated with down-regulation of the intracellular camp level, up-regulation of p21waf1 protein expression and its phosphorylation level, which could be reversed by pretreatment with the gabab antagonist, phaclofen, indicating that (±)-baclofen-evoked growth blockade was exerted in a gabab-dependent fashion [1].

in vivo

the mice, subcutaneously injected with bel-7402 cells, were given an intraperitoneal injection of (±)-baclofen 30 mg/kg every day for 30 days. compared with the control, (±)-baclofen remarkably blocked the bel-7402 xenograft tumor growth without causing toxic effects via measuring the relative tumor volume and the mean body weight change in (±)-baclofen-treated groups, which could make (±)-baclofen as an effective and relatively safe potential drug for the treatment of hcc [1].

Drug interactions

Potentially hazardous interactions with other drugs Anti-arrhythmics: enhanced muscle relaxant effect with procainamide. Antidepressants: enhanced muscle relaxant effect with tricyclics. Antihypertensives: enhanced hypotensive effect. Lithium: use with caution.

IC 50

200 nm: a selective agonist of γ-aminobutyric acid metabotropic receptor (b) (gabab).

Metabolism

Baclofen is rapidly and effectively absorbed after oral administration. It is lipophilic and able to penetrate the blood-brain barrier.Approximately 35% of the drug is excreted unchanged in the urine and feces.

references

[1]. wang, t., huang, w., & chen, f. baclofen, a gabab receptor agonist, inhibits human hepatocellular carcinoma cell growth in vitro and in vivo. life sciences. 2008; 82(9-10): 536-541.

Check Digit Verification of cas no

The CAS Registry Mumber 1134-47-0 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,1,3 and 4 respectively; the second part has 2 digits, 4 and 7 respectively.
Calculate Digit Verification of CAS Registry Number 1134-47:
(6*1)+(5*1)+(4*3)+(3*4)+(2*4)+(1*7)=50
50 % 10 = 0
So 1134-47-0 is a valid CAS Registry Number.
InChI:InChI=1/C10H12ClNO2/c11-9-3-1-7(2-4-9)8(6-12)5-10(13)14/h1-4,8H,5-6,12H2,(H,13,14)/t8-/m1/s1

1134-47-0 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • TCI America

  • (B3343)  Baclofen  >98.0%(T)

  • 1134-47-0

  • 5g

  • 990.00CNY

  • Detail
  • TCI America

  • (B3343)  Baclofen  >98.0%(T)

  • 1134-47-0

  • 25g

  • 3,390.00CNY

  • Detail
  • Sigma-Aldrich

  • (B0200000)  Baclofen  European Pharmacopoeia (EP) Reference Standard

  • 1134-47-0

  • B0200000

  • 1,880.19CNY

  • Detail
  • USP

  • (1048200)  Baclofen  United States Pharmacopeia (USP) Reference Standard

  • 1134-47-0

  • 1048200-350MG

  • 4,647.24CNY

  • Detail

1134-47-0SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 10, 2017

Revision Date: Aug 10, 2017

1.Identification

1.1 GHS Product identifier

Product name baclofen

1.2 Other means of identification

Product number -
Other names Baclofen

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:1134-47-0 SDS

1134-47-0Synthetic route

3-(4-chlorophenyl)-4-(1,3-dioxoisoindolin-2-yl)-N-(quinolin-8-yl)butanamide

3-(4-chlorophenyl)-4-(1,3-dioxoisoindolin-2-yl)-N-(quinolin-8-yl)butanamide

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With hydrogenchloride In water at 130℃; for 24h; Sealed tube;97%
3-(4-chlorophenyl)-4-((((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)carbonyl)amino)butanoic acid

3-(4-chlorophenyl)-4-((((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)carbonyl)amino)butanoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With sodium L-ascorbate; fluorescein free acid In aq. phosphate buffer for 0.5h; pH=7.4; Irradiation;87%
4-(4-chlorophenyl)pyrrolidin-2-one
22518-27-0

4-(4-chlorophenyl)pyrrolidin-2-one

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With hydrogenchloride; water In water for 16h; Reflux;81%
With hydrogenchloride for 2h; Heating;54%
3-(p-chlorophenyl)glutaramic acid
1141-23-7

3-(p-chlorophenyl)glutaramic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With sodium sulfamate; sodium hypobromide at -5 - 55℃; for 2.16667h;79.4%
(E)-3-(4-chlorophenyl)-3-cyanoacrylic acid

(E)-3-(4-chlorophenyl)-3-cyanoacrylic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With ammonia; hydrogen In water at 25 - 30℃; for 6h;70%
ethyl 4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)-3-(4-chlorophenyl)butanoate
927207-26-9

ethyl 4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)-3-(4-chlorophenyl)butanoate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With hydrogenchloride; hydrazine hydrate In ethanol Heating;58%
Baclofen hydrochloride

Baclofen hydrochloride

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With ammonium hydroxide In methanol at 60℃; for 2h; pH=6.9 - 7;41%
ethyl 3-(4-chlorophenyl)-3-hydroxybutanoate
21133-98-2

ethyl 3-(4-chlorophenyl)-3-hydroxybutanoate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 6 steps
1: 1.) p-toluenesulfonic acid, 2.) 10percent NaOH / 1.) toluene, reflux, 3 h, 2.) reflux, 2 h
2: 37 percent / 1.) N-bromosuccinimide, 2.) NH3 / 1.) CCl4, reflux, 48 h, 2.) THF, 3 h
3: 16 percent / NH3 / tetrahydrofuran / 3 h
4: 65 percent / 1 M NH4OH / 1 h / 70 °C
5: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
6: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
Multi-step reaction with 6 steps
1: 1.) p-toluenesulfonic acid, 2.) 10percent NaOH / 1.) toluene, reflux, 3 h, 2.) reflux, 2 h
2: 37 percent / N-bromosuccinimide / CCl4 / 48 h / Heating
3: 16 percent / NH3 / tetrahydrofuran / 3 h
4: 65 percent / 1 M NH4OH / 1 h / 70 °C
5: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
6: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
(E)-3-(4-chlorophenyl)but-2-enoic acid
81187-89-5, 21758-07-6

(E)-3-(4-chlorophenyl)but-2-enoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1: 37 percent / 1.) N-bromosuccinimide, 2.) NH3 / 1.) CCl4, reflux, 48 h, 2.) THF, 3 h
2: 16 percent / NH3 / tetrahydrofuran / 3 h
3: 65 percent / 1 M NH4OH / 1 h / 70 °C
4: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
5: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
Multi-step reaction with 5 steps
1: 37 percent / N-bromosuccinimide / CCl4 / 48 h / Heating
2: 16 percent / NH3 / tetrahydrofuran / 3 h
3: 65 percent / 1 M NH4OH / 1 h / 70 °C
4: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
5: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
para-chloroacetophenone
99-91-2

para-chloroacetophenone

6--benzo<1.3>dioxol-5-ylamine

6--benzo<1.3>dioxol-5-ylamine

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 7 steps
1: 240 g / Zn / benzene / Heating
2: 1.) p-toluenesulfonic acid, 2.) 10percent NaOH / 1.) toluene, reflux, 3 h, 2.) reflux, 2 h
3: 37 percent / 1.) N-bromosuccinimide, 2.) NH3 / 1.) CCl4, reflux, 48 h, 2.) THF, 3 h
4: 16 percent / NH3 / tetrahydrofuran / 3 h
5: 65 percent / 1 M NH4OH / 1 h / 70 °C
6: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
7: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
Multi-step reaction with 7 steps
1: 240 g / Zn / benzene / Heating
2: 1.) p-toluenesulfonic acid, 2.) 10percent NaOH / 1.) toluene, reflux, 3 h, 2.) reflux, 2 h
3: 37 percent / N-bromosuccinimide / CCl4 / 48 h / Heating
4: 16 percent / NH3 / tetrahydrofuran / 3 h
5: 65 percent / 1 M NH4OH / 1 h / 70 °C
6: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
7: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
4-(4-chlorophenyl)-1,5-dihydro-2H-pyrrol-2-one
81187-93-1

4-(4-chlorophenyl)-1,5-dihydro-2H-pyrrol-2-one

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 2 steps
1: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
2: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
(Z)-4-amino-3-(4-chlorophenyl)but-2-enoic acid
81187-91-9

(Z)-4-amino-3-(4-chlorophenyl)but-2-enoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: 65 percent / 1 M NH4OH / 1 h / 70 °C
2: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
3: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
(Z)-4-Bromo-3-(4-chloro-phenyl)-but-2-enoic acid
81187-90-8

(Z)-4-Bromo-3-(4-chloro-phenyl)-but-2-enoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: 16 percent / NH3 / tetrahydrofuran / 3 h
2: 65 percent / 1 M NH4OH / 1 h / 70 °C
3: 59 percent / H2, Raney nickel W-5 / ethanol / 16 h / 3040 Torr / Ambient temperature
4: 54 percent / 6 M HCl / 2 h / Heating
View Scheme
ethyl rac β-[(aminomethyl)-4-chlorophenyl]-propancarboxylate

ethyl rac β-[(aminomethyl)-4-chlorophenyl]-propancarboxylate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With hydrogenchloride In water Cooling with ice;
3-chloro-4-(4-chlorophenyl)-5-hydroxyfuran-2(5H)-one

3-chloro-4-(4-chlorophenyl)-5-hydroxyfuran-2(5H)-one

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1.1: acetic acid / chloroform / 1 h / 0 - 20 °C
1.2: 20 °C
2.1: trifluoroacetic acid / 1,2-dichloro-ethane / 2 h / 80 °C
3.1: nickel dichloride; sodium tetrahydroborate / methanol; tetrahydrofuran / 1 h / 0 - 20 °C
4.1: hydrogenchloride; water / water / 16 h / Reflux
View Scheme
3-chloro-4-(4-chlorophenyl)-1-(2,4-dimethoxybenzyl)-1H-pyrrol-2(5H)-one

3-chloro-4-(4-chlorophenyl)-1-(2,4-dimethoxybenzyl)-1H-pyrrol-2(5H)-one

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: trifluoroacetic acid / 1,2-dichloro-ethane / 2 h / 80 °C
2: nickel dichloride; sodium tetrahydroborate / methanol; tetrahydrofuran / 1 h / 0 - 20 °C
3: hydrogenchloride; water / water / 16 h / Reflux
View Scheme
3-chloro-4-(4-chlorophenyl)-1H-pyrrol-2(5H)-one

3-chloro-4-(4-chlorophenyl)-1H-pyrrol-2(5H)-one

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 2 steps
1: nickel dichloride; sodium tetrahydroborate / methanol; tetrahydrofuran / 1 h / 0 - 20 °C
2: hydrogenchloride; water / water / 16 h / Reflux
View Scheme
4-Chlorophenylboronic acid
1679-18-1

4-Chlorophenylboronic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 5 steps
1.1: cesium fluoride; tetrabutyl-ammonium chloride; bis-triphenylphosphine-palladium(II) chloride / toluene; water / 18 h / 20 °C / Inert atmosphere
2.1: acetic acid / chloroform / 1 h / 0 - 20 °C
2.2: 20 °C
3.1: trifluoroacetic acid / 1,2-dichloro-ethane / 2 h / 80 °C
4.1: nickel dichloride; sodium tetrahydroborate / methanol; tetrahydrofuran / 1 h / 0 - 20 °C
5.1: hydrogenchloride; water / water / 16 h / Reflux
View Scheme
4-chlorobenzaldehyde
104-88-1

4-chlorobenzaldehyde

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1.1: potassium tert-butylate / toluene; methanol / 0.5 h / 20 °C / 4500.45 Torr / Inert atmosphere
1.2: 0.11 h / 25 °C / 4500.45 Torr / Inert atmosphere
2.1: tetrabutyl ammonium fluoride / tetrahydrofuran / 1 h / 50 °C / 6000.6 Torr
3.1: lithium hydroxide; water / toluene / 1 h / 50 °C / 3750.38 Torr
4.1: hydrogen / methanol / 60 °C / 45004.5 Torr
View Scheme
Multi-step reaction with 5 steps
1: diammonium phosphate / water / 5 h / 15 - 20 °C
2: potassium hydroxide / 2 h / 85 - 90 °C
3: urea / 1 h / 130 - 140 °C
4: sodium hydroxide / water / 1.5 h / 65 - 70 °C
5: sodium hypobromide; sodium sulfamate / 2.17 h / -5 - 55 °C
View Scheme
methyl 4-chlorocinnamate
7560-44-3, 20754-21-6, 20754-24-9

methyl 4-chlorocinnamate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: tetrabutyl ammonium fluoride / tetrahydrofuran / 1 h / 50 °C / 6000.6 Torr
2: lithium hydroxide; water / toluene / 1 h / 50 °C / 3750.38 Torr
3: hydrogen / methanol / 60 °C / 45004.5 Torr
View Scheme
methyl (+/-)-3-(4-chlorophenyl)-4-nitrobutanoate
101466-69-7

methyl (+/-)-3-(4-chlorophenyl)-4-nitrobutanoate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 2 steps
1: lithium hydroxide; water / toluene / 1 h / 50 °C / 3750.38 Torr
2: hydrogen / methanol / 60 °C / 45004.5 Torr
View Scheme
(+/-)-4-nitro-3-(4-chloro)butanoic acid
159112-23-9

(+/-)-4-nitro-3-(4-chloro)butanoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
With hydrogen In methanol at 60℃; under 45004.5 Torr;493 mg
2-(4-chlorophenylmethylene)acetoacetic acid ethyl ester
19411-80-4

2-(4-chlorophenylmethylene)acetoacetic acid ethyl ester

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 4 steps
1: potassium hydroxide / 2 h / 85 - 90 °C
2: urea / 1 h / 130 - 140 °C
3: sodium hydroxide / water / 1.5 h / 65 - 70 °C
4: sodium hypobromide; sodium sulfamate / 2.17 h / -5 - 55 °C
View Scheme
3-(4-chlorophenyl)pentane-1,5-dioic acid
35271-74-0

3-(4-chlorophenyl)pentane-1,5-dioic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Multi-step reaction with 3 steps
1: urea / 1 h / 130 - 140 °C
2: sodium hydroxide / water / 1.5 h / 65 - 70 °C
3: sodium hypobromide; sodium sulfamate / 2.17 h / -5 - 55 °C
View Scheme
ethanol
64-17-5

ethanol

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

ethyl 4-amino-3-(4-chlorophenyl)butanoate hydrochloride

ethyl 4-amino-3-(4-chlorophenyl)butanoate hydrochloride

Conditions
ConditionsYield
With thionyl chloride at 0 - 80℃; for 5h;99%
With hydrogenchloride at 20℃; for 24h;
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

butan-1-ol
71-36-3

butan-1-ol

baclofen n-butyl ester hydrochloride

baclofen n-butyl ester hydrochloride

Conditions
ConditionsYield
With hydrogenchloride at 105℃; for 0.5h;98%
With hydrogenchloride at 20℃; for 24h;
methanol
67-56-1

methanol

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

methyl (RS)-4-amino-3-(4-chlorophenyl)butanoate hydrochloride

methyl (RS)-4-amino-3-(4-chlorophenyl)butanoate hydrochloride

Conditions
ConditionsYield
With thionyl chloride for 0.5h; Ambient temperature;98%
With thionyl chloride95%
With hydrogenchloride89%
With hydrogenchloride at 20℃; for 24h;
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

4-(4-chlorophenyl)pyrrolidin-2-one
22518-27-0

4-(4-chlorophenyl)pyrrolidin-2-one

Conditions
ConditionsYield
With aluminum oxide In toluene for 16h; Heating / reflux;90%
With aluminum oxide In toluene for 5h; Heating;88%
With silica gel In toluene for 6h; Heating;85%
2-chloroethyl isothiocyanate
1943-83-5

2-chloroethyl isothiocyanate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(4-chlorophenyl)-4-[3-(2-chloroethyl)ureido]butyric acid
213407-00-2

3-(4-chlorophenyl)-4-[3-(2-chloroethyl)ureido]butyric acid

Conditions
ConditionsYield
With sodium hydroxide for 1h; Ambient temperature;89%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

2,4-Dinitrofluorobenzene
70-34-8

2,4-Dinitrofluorobenzene

γ-2,4-Dinitrophenylamino-β-(p-chlorophenyl)butyric acid

γ-2,4-Dinitrophenylamino-β-(p-chlorophenyl)butyric acid

Conditions
ConditionsYield
With sodium hydrogencarbonate In ethanol at 60℃; for 0.75h;84%
di-tert-butyl dicarbonate
24424-99-5

di-tert-butyl dicarbonate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

4-((tert-butoxycarbonyl)amino)-3-(4-chlorophenyl)butanoic acid
78131-30-3

4-((tert-butoxycarbonyl)amino)-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Stage #1: di-tert-butyl dicarbonate; 4-amino-3-(4-chlorophenyl)butanoic acid With sodium hydroxide; water In 1,4-dioxane at 0 - 20℃; for 4h;
Stage #2: With citric acid In 1,4-dioxane; water pH=3;
84%
cis,trans-2,5-dimethoxytetrahydrofuran
696-59-3

cis,trans-2,5-dimethoxytetrahydrofuran

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(4-chlorophenyl)-4-pyrrol-1-ylbutyric acid
187870-25-3

3-(4-chlorophenyl)-4-pyrrol-1-ylbutyric acid

Conditions
ConditionsYield
With acetic acid for 1h; Heating;82%
With acetic acid Clauson-Kaas reaction;
2-oxo-4-phenylbutyric acid
710-11-2

2-oxo-4-phenylbutyric acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(4-chlorophenyl)-4-(3-phenylpropanethioamido)butanoic acid

3-(4-chlorophenyl)-4-(3-phenylpropanethioamido)butanoic acid

Conditions
ConditionsYield
With sulfur; 1-dodecylthiol In N,N-dimethyl-formamide at 20℃; for 2h; Sealed tube; chemoselective reaction;76%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

phenyl isocyanate
103-71-9

phenyl isocyanate

3-(4-chlorophenyl)-4-(3-phenylureido)butyric acid

3-(4-chlorophenyl)-4-(3-phenylureido)butyric acid

Conditions
ConditionsYield
With sodium hydroxide for 1h; Ambient temperature;75%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

ethyl isocyanate
109-90-0

ethyl isocyanate

3-(4-chlorophenyl)-4-(3-ethylureido)butyric acid
213406-99-6

3-(4-chlorophenyl)-4-(3-ethylureido)butyric acid

Conditions
ConditionsYield
With sodium hydroxide Addition;74%
With sodium hydroxide for 1h; Ambient temperature;45%
Propyl isocyanate
110-78-1

Propyl isocyanate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(-chlorophenyl)-4-(3-propylureido)butyric acid

3-(-chlorophenyl)-4-(3-propylureido)butyric acid

Conditions
ConditionsYield
With sodium hydroxide for 1h; Ambient temperature;63%
2-oxoheptadecanoic acid
73506-86-2

2-oxoheptadecanoic acid

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(4-chlorophenyl)-4-palmitamidobutanoic acid

3-(4-chlorophenyl)-4-palmitamidobutanoic acid

Conditions
ConditionsYield
With tert.-butylhydroperoxide In water; N,N-dimethyl-formamide at 20℃; for 1h; Sealed tube; Darkness; chemoselective reaction;61%
octanol
111-87-5

octanol

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

A

1-Chlorooctane
111-85-3

1-Chlorooctane

B

4-Amino-3-(4-chloro-phenyl)-butyric acid octyl ester; hydrochloride
131403-01-5

4-Amino-3-(4-chloro-phenyl)-butyric acid octyl ester; hydrochloride

Conditions
ConditionsYield
With hydrogenchloride at 130℃;A n/a
B 54%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

2,4,6-triphenylpyrylium tetrafluoroborate
448-61-3

2,4,6-triphenylpyrylium tetrafluoroborate

C33H27ClNO2(1+)*BF4(1-)

C33H27ClNO2(1+)*BF4(1-)

Conditions
ConditionsYield
In ethanol at 85 - 90℃; for 4h; Schlenk technique;54%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

trifluoroacetic anhydride
407-25-0

trifluoroacetic anhydride

A

4-(4-chlorophenyl)pyrrolidin-2-one
22518-27-0

4-(4-chlorophenyl)pyrrolidin-2-one

B

3-(4-chlorophenyl)-4-(2,2,2-trifluoroacetylamino)-butyric acid
229014-55-5

3-(4-chlorophenyl)-4-(2,2,2-trifluoroacetylamino)-butyric acid

Conditions
ConditionsYield
In diethyl ether at 20℃; for 0.5h; Friedel-Crafts cyclization;A 42%
B 38%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

6-bromo-3-methyl-2-phenylquinoline-4-carboxylic acid

6-bromo-3-methyl-2-phenylquinoline-4-carboxylic acid

(+/-)-4-{[(6-bromo-3-methyl-2-phenylquinolin-4-yl)carbonyl]amino}-3-(4-chlorophenyl)butanoic acid

(+/-)-4-{[(6-bromo-3-methyl-2-phenylquinolin-4-yl)carbonyl]amino}-3-(4-chlorophenyl)butanoic acid

Conditions
ConditionsYield
Stage #1: 6-bromo-3-methyl-2-phenylquinoline-4-carboxylic acid With N-ethyl-N,N-diisopropylamine; N-[(dimethylamino)-3-oxo-1H-1,2,3-triazolo[4,5-b]pyridin-1-yl-methylene]-N-methylmethanaminium hexafluorophosphate In N,N-dimethyl-formamide at 20℃; for 0.5h;
Stage #2: 4-amino-3-(4-chlorophenyl)butanoic acid In N,N-dimethyl-formamide at 60℃; for 3h;
41%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

Isopropyl isocyanate
1795-48-8

Isopropyl isocyanate

3-(4-chlorophenyl)-4-(3-isopropylureido)butyric acid

3-(4-chlorophenyl)-4-(3-isopropylureido)butyric acid

Conditions
ConditionsYield
With sodium hydroxide for 1h; Ambient temperature;40%
2,5-dioxopyrrolidin-1-yl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl carbonate
1255209-41-6

2,5-dioxopyrrolidin-1-yl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl carbonate

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3-(4-chlorophenyl)-4-((((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)carbonyl)amino)butanoic acid

3-(4-chlorophenyl)-4-((((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)carbonyl)amino)butanoic acid

Conditions
ConditionsYield
With potassium carbonate In water; N,N-dimethyl-formamide Inert atmosphere;38.4%
4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

3,5-dinitrobenzoic anhydride
40993-10-0

3,5-dinitrobenzoic anhydride

3-(4-chloro-phenyl)-4-(3,5-dinitro-benzoylamino)-butyric acid

3-(4-chloro-phenyl)-4-(3,5-dinitro-benzoylamino)-butyric acid

Conditions
ConditionsYield
With pyridine; dmap In acetonitrile at 20℃; for 0.25h;
propan-1-ol
71-23-8

propan-1-ol

4-amino-3-(4-chlorophenyl)butanoic acid
1134-47-0

4-amino-3-(4-chlorophenyl)butanoic acid

baclofen 1-propyl ester hydrochloride

baclofen 1-propyl ester hydrochloride

Conditions
ConditionsYield
With hydrogenchloride at 20℃; for 24h;

1134-47-0Relevant articles and documents

Novel approach to the synthesis of (R,S)-baclofen via PD(II)-bipyridine - Catalyzed conjugative addition

Varala, Ravi,Adapa, Srinivas R.

, p. 3743 - 3747 (2006)

Synthesis of (R,S)-baclofen is described starting from N- phthalimidoacetaldehyde. The key step in the synthesis was Pd(II)-bipyridine- catalyzed conjugative addition of 4-chloroboronic acid. Copyright Taylor & Francis Group, LLC.

Photocatalysis Enables Visible-Light Uncaging of Bioactive Molecules in Live Cells

Wang, Haoyan,Li, Wei-Guang,Zeng, Kaixing,Wu, Yan-Jiao,Zhang, Yixin,Xu, Tian-Le,Chen, Yiyun

supporting information, p. 561 - 565 (2019/01/04)

The photo-manipulation of bioactive molecules provides unique advantages due to the high temporal and spatial precision of light. The first visible-light uncaging reaction by photocatalytic deboronative hydroxylation in live cells is now demonstrated. Using Fluorescein and Rhodamine derivatives as photocatalysts and ascorbates as reductants, transient hydrogen peroxides were generated from molecular oxygen to uncage phenol, alcohol, and amine functional groups on bioactive molecules in bacteria and mammalian cells, including neurons. This effective visible-light uncaging reaction enabled the light-inducible protein expression, the photo-manipulation of membrane potentials, and the subcellular-specific photo-release of small molecules.

AN IMPROVED PROCESS FOR THE PREPARATION OF BACLOFEN AND ITS INTERMEDIATE

-

Page/Page column 17, (2017/02/09)

The present invention provides an improved process for the preparation of 3-(4-chlorophenyl)-3- cyanopropanoic acid (compound (A)) and further its transformation to Baclofen (I). The process comprises reaction of compound (II) with Glyoxylic acid to obtain 3-(4-chlorophenyl)-3- cyanoacrylic acid (III); followed by the 'in- situ' reduction of (III) in the presence of a reducing agent to provide the compound (A). Alternatively, the compound (A) is obtained by the process comprising reacting 2-(4- chlorophenyl)acetonitrile (II) with haloacetic acid (IV) in the presence of a base. The compound 3-(4-chlorophenyl)-3-cyanopropanoic acid (A) undergoes hydrogenation in the presence of a metal catalyst and ammonia solution to provide Baclofen (I).

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 1134-47-0