139-24-2Relevant articles and documents
Preparation of niobium or tantalum complex and application of niobium or tantalum complex in catalyzing aromatic amine to generate oxidized azobenzene compound
-
Paragraph 0072-0075, (2021/11/03)
The invention provides a preparation method of niobium or tantalum complex and an application of the niobium or tantalum complex in catalyzing aromatic amine to generate an oxidized azobenzene compound. The preparation method of the complex comprises A hydration oxide preparation, @timetime@ niobium oxide or tantalum oxide and strong base in 300 - 800 °C melting calcination 2 - 8h, adding water to dissolve and filter, and then adjusting pH through 4-6, suction filtration and drying. The B complex is prepared by mixing a hydrated oxide with a molar ratio 10-25: 1 with hydrogen peroxide, adding an organic acid and a cationic precursor after clarifying the solution, and evaporating and drying to obtain a niobium complex or a tantalum complex. The molar ratio @timetime@: 1-3. In the method for synthesizing the oxidized azobenzene compound by using niobium or tantalum complex as a catalyst, ethanol is used as a solvent, hydrogen peroxide is used as an oxidant, niobium complex or tantalum complex is used as a catalyst, and the addition amount is ppm.
Preparation of azoxy benzene (by machine translation)
-
Paragraph 0029; 0036, (2020/05/21)
[A] good workability and safety, cost, and, efficient production of the azoxy benzene azoxy benzene can be produced. [Solution] nitrobenzene ones, having the photocatalytic function with a dye, a reducing agent such as a fluorine resin or a transparent resin material is a mixed solution of 1 mm in diameter are inserted into the tube 4 does not inhibit the reaction, 4 LED lamp 5 emits visible from the outside of the tube moves within the tube 4 is provided with visible light within the tube 4 by a photocatalyst reaction mixed solution so as to obtain azoxy benzene compounds. Figure 2 [drawing] (by machine translation)
Low-temperature catalytic oxidation of aniline to azoxybenzene over an Ag/Fe2O3 nanoparticle catalyst using H2O2 as an oxidant
Paul, Bappi,Sharma, Sachin K.,Adak, Shubhadeep,Khatun, Rubina,Singh, Gurmeet,Das, Dipak,Joshi, Vedant,Bhandari, Sahil,Dhar, Siddhartha Sankar,Bal, Rajaram
, p. 8911 - 8918 (2019/06/18)
An in situ modified hydrothermal synthesis of Ag/Fe2O3 nanoparticles (NPs) and studies of their catalytic activity as a simple, eco-friendly and recyclable catalyst for one-pot conversion of aniline to azoxybenzene were performed. The as-synthesized nanostructured material was characterised by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), SEM-mapping, temperature-programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption isotherms (BET), Fourier transform infrared spectroscopy (FT-IR), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), ultraviolet-visible spectroscopy (UV-vis) and vibrating sample magnetometer spectroscopy (VSM). The most active and recyclable catalyst with 2-5 nm diameters of the metallic Ag particles supported on 10-50 nm Fe2O3 nanoparticles was formed with a silver loading of 1.8 wt%. A high turnover number of ~592 was achieved with 92% conversion of aniline and 94% selectivity towards the target product azoxybenzene under atmospheric conditions. The effects of various reaction parameters including the reaction time, temperature and substrate to H2O2 molar ratio were screened and studied in detail. The results reveal the role of a synergistic effect between the surface Ag nanoparticles and Fe2O3 nanospheres for high catalytic activity.