Welcome to LookChem.com Sign In|Join Free

CAS

  • or

77-09-8

Post Buying Request

77-09-8 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

77-09-8 Usage

acid–base indicator

Phenolphthalein is another weak organic acid. It is not particularly water soluble, so we generally dissolve it in aqueous ethanol. The ethanol explains the pleasant, sweet smell of phenolphthalein solutions. Phenolphthalein is colourless and clear in acidic solutions, but imparts an intense puce pink colour in alkaline solutions of higher pH, with λ(max) = 552 nm. The coloured form of phenolphthalein contains a quinone moiety; in fact, any chromophore based on a quinone has a red colour. But if a solution is prepared at pH 7 (e.g. as determined with a pH meter), we find the phenolphthalein indicator is still colourless, and the pink colour only appears when the pH reaches 8.2. Therefore, we have a problem: the indicator has not detected neutrality, since it changes colour at too high a value of pH. in fact, only a tiny incremental addition of alkali solution is needed to substantially increase the solution pH by several pH units. In other words, a fraction of a drop of alkali solution is the only difference between pH 7 (at the true volume at neutralization) and pH 8 when the phenolphthalein changes from colourless to puce pink. Figure 1 lists the pH changes for a series of common pH indicators. The colour changes occur over a wide range of pHs, the exact value depending on the indicator chosen. Methyl violet changes from yellow to blue as the pH increases between 0 and 1.6. At the opposite extreme, phenolphthalein responds to pH changes in the range 8.2 to 10.

Chemical Properties

Different sources of media describe the Chemical Properties of 77-09-8 differently. You can refer to the following data:
1. Phenolphthalein is a weak organic acid, at room temperature, appearing as white or microstrip yellow small crystals, being odorless, tasteless, insoluble in water and soluble in alcohol (ethanol) and ether. When dissolved in alcohol solution, it can be made of acid and alkali indicator. It is colorless in acid solution while exhibiting red color in the carbonate solution of alkali metal. However, if placed in the concentrated alkali solution, it will produce colorless tri-metal Salt so that the red color will fade. In view of this feature, laboratory commonly uses it as a kind of acid and alkali titration indicator with the discoloration range of PH being around 8.2 to 10.0, turning from colorless to red. When the phenolphthalein reagent is dropped into water or neutral, acidic aqueous solution, there will be white turbidity. This is due to that the alcohol is easily soluble in water, so that the reagent water-insoluble phenolphthalein is precipitated out. The other major applications are as follows: 1, the pharmaceutical raw materials in pharmaceutical industry: it is suitable for habitual stubborn constipation, including tablets, suppositories and other formulations. 2, it can be used for organic synthesis: mainly used in synthesizing plastics, especially in synthesizing the phthalazinone poly aryl ether ketone poly aryl ether ketone polymers. This kind of polymers, because of its excellent heat resistance, water resistance, corrosion resistance, heat aging resistance and good processability, fibers, coatings and composites made of it are widely used in the fields of electrical and electronic equipment, transportation and aerospace, atomic energy engineering and military. 3, used as acid and alkali indicator, non-aqueous solution titration indicator and chromatography analysis reagents.
2. white to light yellow crystal powde

General Description

Different sources of media describe the General Description of 77-09-8 differently. You can refer to the following data:
1. Phenolphthalein mainly acts on the large intestine, which produces semi-liquid excreta in 4 to 8 hours with little or no colic. The claim that yellow phenolphthalein is three times stronger than white remains unproven. As a result of enterohepatic circulation, the effect of a single dose is sustainable for 3 to 4 days. The drug is an active member of many laxatives that can be sold legally without prescription. Serious adverse effects are rare but can occur when used in excess. Phenolphthalein should be avoided on the elderly, because its long-term role can cause severe depletion of water and electrolytes. Dermatitis (fixed rash, itching, burning sensation, blistering, and residual pigmentation) can occur in allergic patients. There were reports of a fatal anaphylaxis but no definite causative relationship with phenolphthalein. There are occasional reports of non-thrombocytopenic purpura. Long-lasting administration can occasionally caused dehydration and electrolyte imbalance due to excessive diarrhea. Phenolphthalein causes alkaline urine or faeces pink.
2. Phenolphthalein solution is a synthetic indicator. It is colorless in acidic and neutral conditions. Phenolphthalein gives pink color when added to a base, therefore it is considered as a base indicator.

Phenolphthalein molecular structure

This product can be obtained by mixing phthalic anhydride with phenol, followed by co-heating with sulfuric acid. Phenolphthalein has its chemical name be 2- [bis- (4-hydroxyphenyl) methyl] benzoic acid. Molecular formula: C20H16O4, relative molecular mass: 318.33. The structural formula is shown in Figure 1 (in fact, it is often existed in the form of colorless lactone, see Figure 2). It appears as triclinic white to yellowish crystalline powder with the melting point of 237 ~ 259 ℃ and the relative density of 1.277 (20/4 ℃). It is easily soluble in ethanol, ether and other organic solvents, slightly soluble in water. It has a weak acidity and is almost completely presented in the molecule state even in very dilute solution. It is soluble in alkaline solution, exhibiting red color in alkaline solution, but is colorless in acidic solution. The three benzene rings in the phenolphthalein molecule are linked to the carbon atoms of a sp3 hybrid center, and there is no conjugate relationship between the benzene rings, being colorless. After coming across alkali, the lactone ring open and generate disodium salt, the central carbon atoms are transferred into the sp2 hybrid state, containing benzoquinone structure. At this time, it forms conjugated system with the three benzene rings which are red; but in excess of alkali, but it is further converted to sp3 hybrid state so that the conjugate system disappears, the color also will recede.

Phenolphthalein indicator

Phenolphthalein indicator is a commonly used acid/alkali titration indicator in analytic chemistry. Phenolphthalein, in alkaline solution, has its colorless lactone ring open to form quinone structure with the color exhibiting red. Upon coming across strong alkali, phenolphthalein can be converted into colorless carboxylate. Its color range is pH 7.0 (colorless) ~ 10.0 (red). The test solution was prepared by dissolving 1 g of 90% ethanol per liter of ethanol. Phenolphthalein is colorless in the solution of pH below 8.5, become red at pH higher than 9. Upon excess amount of alkali and no color, the color process is as follows: Phenolphthalein, when used as acid-alkali titration indicator, is generally used at a concentration of 1% concentration. 1 g of phenolphthalein was dissolved in 100 ml of 80% alcohol; slowly drop 0.1 mol / l sodium hydroxide to reddish (for neutralizing the small amount of acid potentially existing in alcohol). The pH range of discoloration is 8.2 to 10. It is colorless upon PH <8.2, is red upon pH> 10. The principle of color change is mainly due to that under different acid and alkali conditions, the structure of the molecule itself changes and further causes different colors. Mixing the phenolphthalein and other indicators can formulate the widely used indicator (also known as a general indicator). Mix 1.3 grams of phenolphthalein, 0.9 grams of bromo-thymol blue, 0.4 grams of methyl red and 0.2 grams of thymol blue and dissolve in 1 liter 70% to 80% alcohol. After completely dissolving, then add some 0.1 mol / l sodium hydroxide makes it become just green before application. The advantage is that the color change with the pH changes is remarkable: red for pH = 4; orange for pH 5; yellow for pH 6, green for pH 7; cyan for pH 8; blue for pH 9; and purple for pH 10. Different broad indicator can be formulated as needed. Phenolphthalein indicator is not only used in laboratories, but also widely used in industrial and agricultural production. In addition to being used in the pH control of the reaction and acid/alkali titration analysis during the manufacturing of chemical products, it is also used for determining the pH of the weaving in the printing and dyeing industry. This is very important for printing and dyeing processing. For example, if the mercerized cloth contains residual alkali that has not been washed, the dyeing will have no shine. However, the phenolphthalein indicator alone can only determine whether the texture of the weave is acidic or alkaline and its pH range, and can’t further determine its specific pH. The wide range of indicators used above can be clearly reflected of the acid and alkali strength in the cloth. Phenolphthalein, in medicine can also be used as laxative, because it can stimulate the peristalsis of the intestinal to promote defecation. However, it can occasionally cause allergic reactions such as dermatitis, thus should be used with attention.

Phenolphthalein test paper

Phenolphthalein test paper is one of the simple test papers commonly used in chemical analysis. It’s highly targeted. Its turns red in case of alkali, and is colorless in acid and neutral solution. To test the presence of ammonia in the air, it will be appears light red. The preparation method is simple: the filter paper is immersed in phenolphthalein solution and taken out for drying after full absorption.

Pharmacology and Toxicology

Phenolphthalein can be used for the treatment of habitual refractory constipation, mainly acting on the colon. After oral administration, it can be subject to slowly decomposition under the effect of the small intestinal alkaline fluid to form soluble sodium salt, thereby stimulating the plexus inside the intestinal wall. It directly acts on the intestinal smooth muscle and increase peristalsis, while also inhibiting the absorption of water within the intestine, so that water and electrolyte accumulates in the colon, resulting in laxative effect. It has mild effect and rarely causes intestinal cramps.

Pharmacokinetics

About 15% is absorbed after oral administration. The absorbed drugs mainly exist in the form of glucuronide to be excreted from urine or the feces, some can also be excreted to the intestine through the bile, reabsorbed in the intestine, to form intestinal - liver circulation and prolong the role time. At 4 to 8 hours after the drug administration, the patients will discharge soft stool. The excretion time for drug administration once needs 3 to 4 days. This product can also be secreted from milk.

Adverse reactions

Phenolphthalein mainly takes effect in the large intestine, leading to the formation of little amount of semi-liquid feces in 4 to 8 hours without colic. The claim regarding that the yellow phenolphthalein is three times stronger than the white version has not been proven. As a result of enterohepatic circulation, the effect of a single dose can last 3 to 4 days. This drug is an active member in a lot of laxative preparations that can be legally sold without a doctor's prescription. Severe adverse effects are rare but can occur in excess amount. For the elderly, phenolphthalein should be hanged, because its lasting effect can cause serious depletion of water and electrolytes. In allergic patients, it can cause occur dermatitis (fixed rash, itching, burning sensation, blistering, and residual pigmentation). There are reports of fatal allergic reactions, but have not yet determined to be related with phenolphthalein. There are occasional reports of non-thrombocytopenic purpura and the occurrence of dehydration and electrolyte imbalance caused excessive diarrhea after long-term application. Phenolphthalein makes alkaline urine or feces turn pink.

Application

This product is a commonly used acid indicator with the range of color change between pH 8.2 (colorless) to 10.0 (red). Phenolphthalein is also a drug, can be used as a laxative, acting on the colon for the treatment of constipation. Used as an acid-base indicator; as irritant laxative for the treatment of constipation

Production method

It is derived from the condensation of phthalic anhydride and phenol.

Uses

Different sources of media describe the Uses of 77-09-8 differently. You can refer to the following data:
1. Phenolphthalein is one of those chemicals that is commonly used in the chemistry laboratory to tell if a solution is acidic or alkaline . These chemicals are called acid - base indicators and used as indicator for acidimetric titrations. Phenolphthalein exerts laxative effects by stimulating the intestinal mucosa and constricting smooth muscles. However, phenolphthalein is no longer used as a laxative due to the suspected carcinogenicity of this compound.
2. Phenolphthalein can be used as an inhibitor and pH indicator. It also induces centrosome amplification and tubulin depolymerization in vitro.

Definition

Different sources of media describe the Definition of 77-09-8 differently. You can refer to the following data:
1. An acid–base indicator that is colorless in acid solutions and becomes red if the pH rises above the transition range of 8–9.6. It is used as the indicator in titrations for which the end point lies clearly on the basic side (pH>7), e.g. oxalic acid or potassium hydrogentartrate against caustic soda.
2. phenolphthalein: A dye used as anacid-base indicator. It is colourlessbelow pH 8 and red above pH 9.6. Itis used in titrations involving weakacids and strong bases. It is also usedas a laxative.

Brand name

Evac-Q-Tabs (Savage); Ex-Lax (Novartis); Modane (Savage); Prulet (Mission Pharmacal);Agaffin;Alophen pills;Anodyne dellipsoids 4;Ap-la-day;Bold laxine;Bom-bon;Bon-bon;Canisan;Certolax;D & m tablets;Darmol;Euchessinia;Evac-qwik tablets;Evactil;Feen-a-mint;Fractines vichy;Fractine-vichy;Fructines-vichy;Kalimalterin;Kest;Kondremul with phenolphtalein;Laxante yer;Laxatabs;Laxatone;Laxen busto;Minilax;Modane plus;Mucinum;Musilaks;Neoprunex;Neopurghes;Novopuren;Paradeines;Peplax;Petrolaglar emulsion;Petro-mul-phen;Phillips laxcaps;Prifunal;Prunetta;Pugrante el aleman;Purganol;Purganos-daguin;Purgant aleman;Purgante orravan;Purgenum;Purgestol;Purgoids;Purgyl;Purjen sahap;Sarolax;Thalinol mrt;Unisvelt;Veracolate.

World Health Organization (WHO)

Phenolphthalein has been widely used as a laxative since its cathartic activity was first described in 1902. Because it undergoes enterohepatic circulation it is eliminated slowly and it has been associated with adverse effects, notably skin reactions, potassium loss and atonia. This has led to the withdrawal of phenolphthalein from pharmaceutical preparations in several countries. Elsewhere, it remains available, often in over-the-counter preparations.

Safety Profile

Confirmed carcinogen. US Food and Drug Administration recommends removal from laxative formulations. Moderately toxic by intraperitoneal route. Human systemic effects: changes in urine composition, gastritis, nausea or vomiting. Used in medicine as a laxative; in chemistry as an indicator. When heated to decomposition it emits acrid smoke and irritating fumes

Carcinogenicity

Phenolphthalein is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.

Purification Methods

Dissolve it in EtOH (7mL/g), then dilute it with eight volumes of cold water, filter and heat on a water-bath to remove most of the alcohol and the phenolphthalein that precipitates is filtered off and dried in vacuo.[Beilstein 18 II 119, 18 III/1V 1945, 18/4 V 188.]

Check Digit Verification of cas no

The CAS Registry Mumber 77-09-8 includes 5 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 2 digits, 7 and 7 respectively; the second part has 2 digits, 0 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 77-09:
(4*7)+(3*7)+(2*0)+(1*9)=58
58 % 10 = 8
So 77-09-8 is a valid CAS Registry Number.
InChI:InChI=1/C20H16O4/c21-15-9-5-13(6-10-15)19(14-7-11-16(22)12-8-14)17-3-1-2-4-18(17)20(23)24/h1-12,19,21-22H,(H,23,24)

77-09-8 Well-known Company Product Price

  • Brand
  • (Code)Product description
  • CAS number
  • Packaging
  • Price
  • Detail
  • Alfa Aesar

  • (38703)  Phenolphthalein, 0.5% w/v in alcohol   

  • 77-09-8

  • 500ml

  • 180.0CNY

  • Detail
  • Alfa Aesar

  • (38703)  Phenolphthalein, 0.5% w/v in alcohol   

  • 77-09-8

  • 1L

  • 362.0CNY

  • Detail
  • Alfa Aesar

  • (38704)  Phenolphthalein, 1% w/v in alcohol   

  • 77-09-8

  • 500ml

  • 295.0CNY

  • Detail
  • Alfa Aesar

  • (A17135)  Phenolphthalein, 98%   

  • 77-09-8

  • 50g

  • 108.0CNY

  • Detail
  • Alfa Aesar

  • (A17135)  Phenolphthalein, 98%   

  • 77-09-8

  • 250g

  • 471.0CNY

  • Detail
  • Alfa Aesar

  • (A17135)  Phenolphthalein, 98%   

  • 77-09-8

  • 1000g

  • 982.0CNY

  • Detail
  • Alfa Aesar

  • (38705)  Phenolphthalein, ACS   

  • 77-09-8

  • 100g

  • 267.0CNY

  • Detail
  • Alfa Aesar

  • (38705)  Phenolphthalein, ACS   

  • 77-09-8

  • 500g

  • 1027.0CNY

  • Detail
  • Fluka

  • (34605)  Phenolphthaleinsolution  2% in ethanol, indicator

  • 77-09-8

  • 34605-1L

  • 905.58CNY

  • Detail
  • Fluka

  • (34605)  Phenolphthaleinsolution  2% in ethanol, indicator

  • 77-09-8

  • 34605-6X1L

  • 4,571.19CNY

  • Detail
  • Fluka

  • (34607)  Phenolphthaleinsolution  Reag. Ph. Eur., indicator, 1% in ethanol

  • 77-09-8

  • 34607-30ML

  • 348.66CNY

  • Detail
  • Fluka

  • (34607)  Phenolphthaleinsolution  Reag. Ph. Eur., indicator, 1% in ethanol

  • 77-09-8

  • 34607-500ML

  • 535.86CNY

  • Detail

77-09-8SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name Phenolphthalein

1.2 Other means of identification

Product number -
Other names 3,3-bis(4-hydroxyphenyl)-2-benzofuran-1-one

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:77-09-8 SDS

77-09-8Synthetic route

phthalic anhydride
85-44-9

phthalic anhydride

phenol
108-95-2

phenol

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With methanesulfonic acid at 90℃; for 5h;94%
With Noccaea caerulescens extract at 80℃; for 0.25h;90%
With mixed metal catalyst derived from Thlaspi at 80℃; for 0.0833333h; Friedel-Crafts Acylation;90%
phthalic anhydride
85-44-9

phthalic anhydride

phenol
108-95-2

phenol

A

phenolphthalein
77-09-8

phenolphthalein

B

spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one
596-24-7

spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one

Conditions
ConditionsYield
With sulfuric acid at 115 - 120℃;
3,3-bis(4-aminophenyl)isobenzofuran-1-(3H)-one
509-77-3

3,3-bis(4-aminophenyl)isobenzofuran-1-(3H)-one

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With potassium nitrite saure Loesung;
benzene-1,2-dicarboxylic acid
88-99-3

benzene-1,2-dicarboxylic acid

phenol
108-95-2

phenol

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With tin(IV) chloride
With sulfuric acid
2-(4-hydroxy-benzoyl)-benzoic acid
85-57-4

2-(4-hydroxy-benzoyl)-benzoic acid

phenol
108-95-2

phenol

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
at 180℃;
phenolphthaleine glucuronide
84755-69-1

phenolphthaleine glucuronide

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With water at 37℃; for 0.75h; β-glucuronidase; addition of Mn2+, V5+, Ni2+, Co2+, Cu+, Ca2+, Cd2+, or Zn2+; influence of regucalcin; effect of dithiothreitol or dipicolinate;
1-(1-cyclohexenyl)-methyl-2-aminomethyl-pyrrolidine

1-(1-cyclohexenyl)-methyl-2-aminomethyl-pyrrolidine

5-methylsulphamoyl-2-methyl-2,3-dihydrobenzofuran-7-carbonyl chloride

5-methylsulphamoyl-2-methyl-2,3-dihydrobenzofuran-7-carbonyl chloride

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With ammonia In chloroform
phenolphthalein dibutyrate
62625-15-4

phenolphthalein dibutyrate

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
With recombinant Arthrobacter globiformis carboxylesterase; water at 45℃; Enzymatic reaction;
Deoxycholic acid
83-44-3

Deoxycholic acid

β-cyclodextrin phenolphthalein complex (1:1)

β-cyclodextrin phenolphthalein complex (1:1)

A

C24H40O4*C42H70O35
37777-96-1

C24H40O4*C42H70O35

B

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
at 25℃; pH=10.5; carbonate buffer;
ursodeoxycholic acid
128-13-2

ursodeoxycholic acid

β-cyclodextrin phenolphthalein complex (1:1)

β-cyclodextrin phenolphthalein complex (1:1)

A

C24H40O4*C42H70O35
137078-96-7

C24H40O4*C42H70O35

B

phenolphthalein
77-09-8

phenolphthalein

Conditions
ConditionsYield
at 25℃; pH=10.5; carbonate buffer;
phthalic anhydride
85-44-9

phthalic anhydride

ortho-cresol
95-48-7

ortho-cresol

phenol
108-95-2

phenol

A

phenolphthalein
77-09-8

phenolphthalein

B

[3-(3'-methyl-4'-hydroxyphenyl)-3-(4''-hydroxyphenyl)phthalide]
854-76-2

[3-(3'-methyl-4'-hydroxyphenyl)-3-(4''-hydroxyphenyl)phthalide]

C

o-cresolphthalein
596-27-0

o-cresolphthalein

Conditions
ConditionsYield
Stage #1: ortho-cresol; phenol With zinc(II) chloride In nitrobenzene at 50 - 60℃;
Stage #2: phthalic anhydride With zinc(II) chloride In nitrobenzene at 120 - 130℃; for 4h; Overall yield = 34 %; Overall yield = 5.9 g;
phenolphthalein
77-09-8

phenolphthalein

pyrographite
7440-44-0

pyrographite

4-methoxy-phenol
150-76-5

4-methoxy-phenol

Methacryloyl chloride
920-46-7

Methacryloyl chloride

phenolphthalein Bis(methacrylate)
81266-22-0

phenolphthalein Bis(methacrylate)

Conditions
ConditionsYield
With hydrogenchloride; magnesium sulfate; triethylamine In dichloromethane; water99.86%
phenolphthalein
77-09-8

phenolphthalein

phenolphthalin
81-90-3

phenolphthalin

Conditions
ConditionsYield
With sodium hydroxide; zinc In water for 96h; Heating;99%
With palladium 10% on activated carbon; W(OTf)6; hydrogen; acetic acid at 50℃; under 760.051 Torr; for 12h;94%
With palladium on activated carbon; W(OTf)6; hydrogen In acetic acid at 50℃; under 760.051 Torr; for 12h;94%
Stage #1: phenolphthalein With sodium hydroxide In water for 0.5h;
Stage #2: With zinc In water at 20 - 60℃;
26.3 mg
phenolphthalein
77-09-8

phenolphthalein

aniline
62-53-3

aniline

2-phenyl-3,3-bis(4-hydroxyphenyl)-2-phthalimidine
6607-41-6

2-phenyl-3,3-bis(4-hydroxyphenyl)-2-phthalimidine

Conditions
ConditionsYield
Stage #1: aniline With hydrogenchloride In water for 1h; Dean-Stark; Inert atmosphere;
Stage #2: phenolphthalein at 154℃; for 22h; Dean-Stark;
99%
With hydrogenchloride In water at 155 - 165℃; for 16h;92%
Stage #1: phenolphthalein; aniline; hydrogenchloride at 150 - 171℃; for 13 - 46h;
Stage #2: With sodium hydroxide; water Product distribution / selectivity;
91%
phenolphthalein
77-09-8

phenolphthalein

(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene) bis(sulfurofluoridate)

(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene) bis(sulfurofluoridate)

Conditions
ConditionsYield
With fluorosulfonyl fluoride; triethylamine In dichloromethane at 20℃; for 18h; Sealed tube;98%
Stage #1: phenolphthalein With triethylamine In dichloromethane
Stage #2: With potassium fluoride; N,N`-sulfuryldiimidazole; trifluoroacetic acid In water at 20℃; for 18h;
87%
With fluorosulfonyl fluoride; triethylamine In dichloromethane at 20℃; for 12h;
phenolphthalein
77-09-8

phenolphthalein

(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene) bis(sulfurofluoridate)

(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene) bis(sulfurofluoridate)

Conditions
ConditionsYield
With fluorosulfonyl fluoride; triethylamine In dichloromethane at 20℃; for 18h;98%
phenolphthalein
77-09-8

phenolphthalein

2,4-Dinitrofluorobenzene
70-34-8

2,4-Dinitrofluorobenzene

C32H18N4O12

C32H18N4O12

Conditions
ConditionsYield
With N-ethyl-N,N-diisopropylamine In dichloromethane at 20℃;98%
phenolphthalein
77-09-8

phenolphthalein

propargyl bromide
106-96-7

propargyl bromide

3,3-bis(4-(prop-2-yn-1-yloxy)phenyl)isobenzofuran-1(3H)-one
142457-74-7

3,3-bis(4-(prop-2-yn-1-yloxy)phenyl)isobenzofuran-1(3H)-one

Conditions
ConditionsYield
With potassium carbonate In ethanol for 1h; Heating;96%
Stage #1: phenolphthalein With potassium carbonate In dimethyl sulfoxide for 0.5h;
Stage #2: propargyl bromide In dimethyl sulfoxide
80%
phenolphthalein
77-09-8

phenolphthalein

3,3-bis(3,5-dibromo-4-hydroxyphenyl)phthalide
76-62-0

3,3-bis(3,5-dibromo-4-hydroxyphenyl)phthalide

Conditions
ConditionsYield
With sulfuric acid; cis-(2-(1H-imidazol-2-yl)pyridine)-(2-(imidazol-2-yl)pyridine)dioxidovanadate(V) tris(aqua); dihydrogen peroxide; potassium bromide In methanol; water at 20℃; for 0.5h; pH=2 - 3;96%
With benzyltriphenylphosphonium tribromide; calcium carbonate In methanol; dichloromethane at 20℃; for 1h;92%
With 1-benzyl-1-aza-4-azoniabicyclo<2.2.2>octane bromide; calcium carbonate In methanol at 20℃; for 1.16667h;88%
With bromine In ethanol; acetic acid Heating;
phenolphthalein
77-09-8

phenolphthalein

acetic anhydride
108-24-7

acetic anhydride

phenolphthalein-4,4'-diyl diacetate
5449-84-3

phenolphthalein-4,4'-diyl diacetate

Conditions
ConditionsYield
With Sulfate; titanium(IV) oxide In dichloromethane at 20℃; for 0.5h;96%
4-Nitrophthalonitrile
31643-49-9

4-Nitrophthalonitrile

phenolphthalein
77-09-8

phenolphthalein

[4,4'-(4,4'-(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene)bis(oxy))]diphthalo nitrile
72742-00-8

[4,4'-(4,4'-(3-oxo-1,3-dihydroisobenzofuran-1,1-diyl)bis(4,1-phenylene)bis(oxy))]diphthalo nitrile

Conditions
ConditionsYield
With potassium carbonate In dimethyl sulfoxide at 20℃; for 24h;96%
With potassium carbonate In N,N-dimethyl-formamide at 60℃; for 8h;
methyl N-phosphonomethylglycinate
39600-44-7

methyl N-phosphonomethylglycinate

phenolphthalein
77-09-8

phenolphthalein

Disodium salt of N-phosphonomethylglycylhydroxamic acid

Disodium salt of N-phosphonomethylglycylhydroxamic acid

Conditions
ConditionsYield
With hydroxylamine hydrochloride; hydroxylamine In methanol95%
phenolphthalein
77-09-8

phenolphthalein

2-(4-hydroxy-benzoyl)-benzoic acid
85-57-4

2-(4-hydroxy-benzoyl)-benzoic acid

Conditions
ConditionsYield
Stage #1: phenolphthalein With hydroxylamine hydrochloride; sodium hydroxide In water at 80℃;
Stage #2: With sulfuric acid In water at 100℃;
92%
With potassium hydroxide; hydroxylamine hydrochloride at 80℃;76%
Stage #1: phenolphthalein With potassium hydroxide; hydroxylamine hydrochloride In water at 80℃; for 0.0833333h;
Stage #2: With acetic acid In ethanol; water
Stage #3: With sulfuric acid In water for 2h; Heating / reflux;
76%
Stage #1: phenolphthalein With hydroxylamine hydrochloride; sodium hydroxide In water at 80℃;
Stage #2: With sulfuric acid In water at 100℃;
1,4-dihydroxy-9,10-anthracenedione
81-64-1

1,4-dihydroxy-9,10-anthracenedione

phenolphthalein
77-09-8

phenolphthalein

C35H20Cl2N4O4
369384-87-2

C35H20Cl2N4O4

polymer; monomer(s): 1,4-dihydroxyanthraquinone; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

polymer; monomer(s): 1,4-dihydroxyanthraquinone; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

Conditions
ConditionsYield
In N,N-dimethyl-formamide Heating;90%
formaldehyd
50-00-0

formaldehyd

3-aminopropyltriethoxysilane
919-30-2

3-aminopropyltriethoxysilane

phenolphthalein
77-09-8

phenolphthalein

C42H60N2O10Si2

C42H60N2O10Si2

Conditions
ConditionsYield
In ethanol; toluene at 80℃; for 5h; Mannich Aminomethylation;89%
phenolphthalein
77-09-8

phenolphthalein

tert-butyldimethylsilyl chloride
18162-48-6

tert-butyldimethylsilyl chloride

3,3-bis(4-((tert-butyldimethylsilyl)oxy)phenyl)isobenzofuran-1(3H)-one

3,3-bis(4-((tert-butyldimethylsilyl)oxy)phenyl)isobenzofuran-1(3H)-one

Conditions
ConditionsYield
With 1H-imidazole In dichloromethane at 20℃;89%
4-(2-AMINOETHYL)MORPHOLINE
2038-03-1

4-(2-AMINOETHYL)MORPHOLINE

phenolphthalein
77-09-8

phenolphthalein

C26H26N2O4

C26H26N2O4

Conditions
ConditionsYield
at 180℃; for 48h; Inert atmosphere;89%
phenolphthalein
77-09-8

phenolphthalein

1,1,1,3,3,3-hexamethyl-disilazane
999-97-3

1,1,1,3,3,3-hexamethyl-disilazane

C26H30O4Si2
111653-48-6

C26H30O4Si2

Conditions
ConditionsYield
With iodine at 20℃; for 0.8h; Neat (no solvent); Air atmosphere;88%
2-chloro-4,6-dimethoxy-1 ,3,5-triazine
3140-73-6

2-chloro-4,6-dimethoxy-1 ,3,5-triazine

phenolphthalein
77-09-8

phenolphthalein

3,3-bis(4-((4,6-dimethoxy-1,3,5-triazin-2-yl)oxy)phenyl)isobenzofuran-1(3H)-one
1432754-89-6

3,3-bis(4-((4,6-dimethoxy-1,3,5-triazin-2-yl)oxy)phenyl)isobenzofuran-1(3H)-one

Conditions
ConditionsYield
With potassium hydroxide In tetrahydrofuran at 20℃;88%
phenolphthalein
77-09-8

phenolphthalein

dinitrophenolphthalein
33964-04-4

dinitrophenolphthalein

Conditions
ConditionsYield
With yttrium(lll) nitrate hexahydrate In acetic acid at 20℃; for 1h;87%
With nitric acid In acetic acid at 15 - 20℃; for 6h; Product distribution / selectivity;78%
phenolphthalein
77-09-8

phenolphthalein

C35H20Cl2N4O4
369384-87-2

C35H20Cl2N4O4

recorcinol
108-46-3

recorcinol

polymer; monomer(s): resorcinol; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

polymer; monomer(s): resorcinol; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

Conditions
ConditionsYield
In N,N-dimethyl-formamide Heating;85%
phenolphthalein
77-09-8

phenolphthalein

N-Methyl-1,3-propanediamine
6291-84-5

N-Methyl-1,3-propanediamine

3,3-bis(4-hydroxyphenyl)-2-(3-(methylamino)propyl)isoindolin-1-one
1254084-09-7

3,3-bis(4-hydroxyphenyl)-2-(3-(methylamino)propyl)isoindolin-1-one

Conditions
ConditionsYield
With hydrogenchloride In water for 24h; Reflux;85%
phenolphthalein
77-09-8

phenolphthalein

ethanolamine
141-43-5

ethanolamine

2-(2-hydroxyethyl)-3,3-bis(4-Hydroxyphenyl)Isoindolin-1-one

2-(2-hydroxyethyl)-3,3-bis(4-Hydroxyphenyl)Isoindolin-1-one

Conditions
ConditionsYield
for 24h; Reflux;83%
phenolphthalein
77-09-8

phenolphthalein

N,N-dimethylethylenediamine
108-00-9

N,N-dimethylethylenediamine

C24H24N2O3
1233359-56-2

C24H24N2O3

Conditions
ConditionsYield
With hydrogenchloride for 24h; Reflux;82%
[Cp*RuOMe]2

[Cp*RuOMe]2

phenolphthalein
77-09-8

phenolphthalein

((HOC6H4)C8H4O(O)(C6H4O))Ru(C5(CH3)5)
926919-88-2

((HOC6H4)C8H4O(O)(C6H4O))Ru(C5(CH3)5)

Conditions
ConditionsYield
In methanol (inert conditions); stirring soln. of ruthenium compd. and phenolphtalein in methanol at room temp. overnight; evapn., addn. of acetone, storing at -30°C, removal supernatant soln., NMR;81%
1,2-di(aminophenyl)-o-carbaborane

1,2-di(aminophenyl)-o-carbaborane

phenolphthalein
77-09-8

phenolphthalein

B10C2H10(C6H4NOC8H4(C6H4OH)2)2

B10C2H10(C6H4NOC8H4(C6H4OH)2)2

Conditions
ConditionsYield
In benzyl alcohol heating (150-170°C, 10 h); solvent removal (vac.), pptn. on pouring residue into benzene, filtration, drying (vac.); elem. anal.;80%
phenolphthalein
77-09-8

phenolphthalein

C35H20Cl2N4O4
369384-87-2

C35H20Cl2N4O4

polymer; monomer(s): bisphenol A; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

polymer; monomer(s): bisphenol A; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

Conditions
ConditionsYield
In N,N-dimethyl-formamide Heating;80%
phenolphthalein
77-09-8

phenolphthalein

benzene-1,2-diol
120-80-9

benzene-1,2-diol

C35H20Cl2N4O4
369384-87-2

C35H20Cl2N4O4

polymer; monomer(s): catechol; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

polymer; monomer(s): catechol; phenolphthalein; 3,3'-{[6-(naphthalen-2-ylamino)-1,3,5-triazine-2,4-diyl]bis(oxy)}dinaphthalene-2-carbonyl chloride

Conditions
ConditionsYield
In N,N-dimethyl-formamide Heating;80%
phenolphthalein
77-09-8

phenolphthalein

C35H20Cl2N4O4
369384-87-2

C35H20Cl2N4O4

polymer; monomers: 2-(β-naphthylamino)-4,6-bis-(2-naphthoxy-3-carbonyl chloride)-S-triazine; phenolphthalein

polymer; monomers: 2-(β-naphthylamino)-4,6-bis-(2-naphthoxy-3-carbonyl chloride)-S-triazine; phenolphthalein

Conditions
ConditionsYield
With cetyltrimethylammonim bromide In N,N-dimethyl-formamide Heating;79%

77-09-8Relevant articles and documents

Synthesis and evaluation of intrinsic bioactivity of fluorescein and phenolphthalein derivatives

Bharathkumar, Kuruba,Durairaj, Arulappan,Mohanapriya, Raman,Obadiah, Asir,Ramanathan, Subramanian,Santhoshkumar, Palanichamy,Vasanthkumar, Samuel

, (2021/09/28)

Fluorescein and phenolphthalein derivatives have been synthesized and screened for their bioactivity via molecular docking, cytotoxicity and antioxidant studies. In molecular docking studies, the compounds 3d have exhibited better glide score and hydrogen bonding ability when docked with t-RNA Dimethylallyltransferase. Antioxidant capabilities were evaluated via DPPH and ABTS radical scavenging activity. In this screening, compound 3d exhibited better inhibition efficiency in the DPPH and ABTS methods. Cytotoxicity of the compounds was assessed by the cell sustainability assay against human cervical cancer cell line (HeLa). All the synthesized compounds exhibited cytotoxic effects against HeLa cells and compounds 3d displayed better activity (IC50) than the standard drug (doxorubicin).

CONTINUOUS METHODS OF MANUFACTURE OF 2-ARYL-3,3-BIS(4-HYDROXYARYL)PHTHALIMIDINES, AND POLYMERS DERIVED THEREFROM

-

Paragraph 0064, (2018/03/25)

A continuous method for the manufacture of a 2-aryl-3,3-bis(hydroxyaryl)phthalimidine comprising continuously heating an anhydride with a phenol in the presence of a catalyst and a first co-catalyst, to form a first reaction mixture comprising a phenolphthalein compound; precipitating the phenolphthalein compound; combining a primary arylamine with an acid catalyst and a second co-catalyst to form a second reaction mixture; adding the phenolphthalein compound to the second reaction mixture; continuously heating the second reaction mixture to provide a third reaction mixture comprising a crude phthalimidine; and treating the crude phthalimidine to remove aminophenol and purify the phthalimidine is provided.

USE OF COMPOSITIONS OBTAINED BY CALCINING PARTICULAR METAL-ACCUMULATING PLANTS FOR IMPLEMENTING CATALYTICAL REACTIONS

-

Paragraph 0717-0721, (2016/01/25)

The use of metal-accumulating plants for implementing chemical reactions especially catalytical reactions.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 77-09-8