57527-54-5

Upstream product

• 665-66-7 amantadine hydrochloride 
• 100-52-7 benzaldehyde 
• 768-94-5 1-Adamantanamine 
• 24886-73-5 1-Azidoadamantane 
• 108-88-3 toluene 
• 1215209-26-9 [Cl₂NN]Cu-NHAd 
• 100-51-6 benzyl alcohol 
• 100-46-9 benzylamine 
• 93-58-3 benzoic acid methyl ester 
• 1613073-63-4 C₁₇H₂₃NO 

Downstream Products

• 74273-32-8 DL-N-(Adamant-1-yl)-phenylglycinethylester 
• 57527-59-0 2-(1-adamantyl)-3-phenyloxaziridine 
• 31463-28-2 N-adamantyl-α-phenylnitrone 
• 1613073-58-7 N-propargyl-N-benzyl-adamantan-1-amine 
• 31463-28-2 N-(Phenylmethylene)tricyclo<3.3.1.1^3,7>decan-1-amine N-Oxide 
• 19026-84-7 N-(adamantan-1-yl)benzamide 
• 104616-97-9 Adamantan-1-yl-(1-phenyl-pentyl)-amine 
• 57527-59-0 trans-2-adamantan-1-yl-3-phenyl-oxaziridine 
• 3717-60-0 2-[N-(1-adamantyl)]aminomethylbenzene 

Relevant academic research and scientific papers

Vanadium-and chromium-catalyzed dehydrogenative synthesis of imines from alcohols and amines

Vanadium(IV) tetraphenylporphyrin dichloride and chromium(III) tetraphenylporphyrin chloride have been developed as catalysts for the acceptorless dehydrogenation of alcohols. The catalysts have been applied to the direct synthesis of imines in overall good yields from a variety of alcohols and amines. The transformations are proposed to proceed by metal?ligand bifunctional pathways with an outer-sphere transfer of two hydrogen atoms from the alcohol to the metal porphyrin complexes. The results show that vanadium and chromium catalysts can also be employed for the dehydrogenation of alcohols with the release of hydrogen gas, and they may represent valuable alternatives to other catalysts based on Earth-abundant metals.

Synthesis, characterization and C-H amination reactivity of nickel iminyl complexes

Metalation of the deprotonated dipyrrin (AdFL)Li with NiCl2(py)2 afforded the divalent Ni product (AdFL)NiCl(py)2 (1) (AdFL: 1,9-di(1-adamantyl)-5-perfluorophenyldipyrrin; py: pyridine). To generate a reactive synthon on which to explore oxidative group transfer, we used potassium graphite to reduce 1, affording the monovalent Ni synthon (AdFL)Ni(py) (2) and concomitant production of a stoichiometric equivalent of KCl and pyridine. Slow addition of mesityl- or 1-adamantylazide in benzene to 2 afforded the oxidized Ni complexes (AdFL)Ni(NMes) (3) and (AdFL)Ni(NAd) (4), respectively. Both 3 and 4 were characterized by multinuclear NMR, EPR, magnetometry, single-crystal X-ray crystallography, theoretical calculations, and X-ray absorption spectroscopies to provide a detailed electronic structure picture of the nitrenoid adducts. X-ray absorption near edge spectroscopy (XANES) on the Ni reveals higher energy Ni 1s → 3d transitions (3: 8333.2 eV; 4: 8333.4 eV) than NiI or unambiguous NiII analogues. N K-edge X-ray absorption spectroscopy performed on 3 and 4 reveals a common low-energy absorption present only for 3 and 4 (395.4 eV) that was assigned via TDDFT as an N 1s promotion into a predominantly N-localized, singly occupied orbital, akin to metal-supported iminyl complexes reported for iron. On the continuum of imido (i.e., NR2-) to iminyl (i.e., 2NR-) formulations, the complexes are best described as NiII-bound iminyl species given the N K-edge and TDDFT results. Given the open-shell configuration (S = 1/2) of the iminyl adducts, we then examined their propensity to undergo nitrenoid-group transfer to organic substrates. The adamantyl complex 4 readily consumes 1,4-cyclohexadiene (CHD) via H-atom abstraction to afford the amide (AdFL)Ni(NHAd) (5), whereas no reaction was observed upon treatment of the mesityl variant 3 with excess amount of CHD over 3 hours. Toluene can be functionalized by 4 at room temperature, exclusively affording the N-1-adamantyl-benzylidene (6). Slow addition of the organoazide substrate (4-azidobutyl)benzene (7) with 2 exclusively forms 4-phenylbutanenitrile (8) as opposed to an intramolecular cyclized pyrrolidine, resulting from facile β-H elimination outcompeting H-atom abstraction from the benzylic position, followed by rapid H2-elimination from the intermediate Ni hydride ketimide intermediate.

Photoredox-catalyzed deaminative alkylation via C-N bond activation of primary amines

Primary amines are often cheap, naturally occurring, and chemically diverse starting materials. For these reasons, deaminative functionalization of amines has emerged as an important area of research. Recent advances in C-N activation transform simple α-1° and α-2° amines into alkylating reagents via Katritzky pyridinium salts. We report a complementary method that activates sterically encumbered α-3° primary amines through visible light photoredox catalysis. By condensing α-3° primary amines with electron-rich aryl aldehyde, we enable an oxidation and deprotonation event, which generates a key imidoyl radical intermediate. A subsequent β-scission event liberates alkyl radicals for coupling with electron-deficient olefins for the generation of unnatural γ-quaternary amino acids and other valuable synthetic targets.

Development and mechanistic investigation of the manganese(iii) salen-catalyzed dehydrogenation of alcohols

The first example of a manganese(iii) catalyst for the acceptorless dehydrogenation of alcohols is presented. N,N′-Bis(salicylidene)-1,2-cyclohexanediaminomanganese(iii) chloride (2) has been shown to catalyze the direct synthesis of imines from a variety of alcohols and amines with the liberation of hydrogen gas. The mechanism has been investigated experimentally with labelled substrates and theoretically with DFT calculations. The results indicate a metal-ligand bifunctional pathway in which both imine groups in the salen ligand are first reduced to form a manganese(iii) amido complex as the catalytically active species. Dehydrogenation of the alcohol then takes place by a stepwise outer-sphere hydrogen transfer generating a manganese(iii) salan hydride from which hydrogen gas is released.

Manganese(III) Porphyrin-Catalyzed Dehydrogenation of Alcohols to form Imines, Tertiary Amines and Quinolines

Manganese(III) porphyrin chloride complexes have been developed for the first time as catalysts for the acceptorless dehydrogenative coupling of alcohols and amines. The reaction has been applied to the direct synthesis of imines, tertiary amines and quinolines where only hydrogen gas and/or water are formed as the by-product(s). The mechanism is believed to involve the formation of a manganese(III) alkoxide complex which degrades into the aldehyde and a manganese(III) hydride species. The latter reacts with the alcohol to form hydrogen gas and thereby regenerates the alkoxide complex.

In Situ Generated Cobalt Catalyst for the Dehydrogenative Coupling of Alcohols and Amines into Imines

An in situ formed cobalt catalyst is developed from cobalt(II)bromide, bis[2-(diisopropylphosphino)-4-methylphenyl]amine and zinc metal. The catalyst mediates the acceptorless dehydrogenative coupling of alcohols and amines into imines with the release of hydrogen gas and the transformation is applied to the synthesis of a variety of imines from different alcohols and amines. The mechanism is investigated with labelled substrates and based on the results a cobalt(I) PNP complex is believed to be the catalytically active species which abstracts hydrogen gas from the alcohol through a metal ligand bifunctional pathway.

Aerobic Oxidative Homo- and Cross-Coupling of Amines Catalyzed by Phenazine Radical Cations

Phenazine radical cations (PhRCs) were used for the first time as efficient metal-free catalysts for the oxidative homo- and cross-coupling of a variety of different amines. A series of functional PhRCs were prepared, characterized with X-ray diffraction, and their radical character was investigated with DFT calculations. They were tested as catalysts under neat conditions with low oxygen pressure to prepare homo- and cross-coupled aliphatic and aromatic imines in high yields. Although all synthesized phenazines were catalytically active, the highest reaction rates and the best selectivity were achieved using the 5,10-dihydro-5,10-dimethylphenazine radical cation. By means of fluorescence, UV-vis and EPR spectroscopy, a mechanism of the oxidative amine coupling, catalyzed by PhRCs, is proposed.

Molybdenum-Catalyzed Dehydrogenative Synthesis of Imines from Alcohols and Amines

A molybdenum N-heterocyclic carbene catalyst has been developed for the synthesis of imines from primary alcohols and amines with the liberation of dihydrogen. The catalyst is generated in situ from molybdenum hexacarbonyl, 1,3-dicyclohexylimidazolium chloride and potassium tert-butoxide and is further stabilized by the phosphine ligand dppe. Imines are formed in moderate to good isolated yields and a variety of alcohols and amines can be employed in the reaction including anilines. The transformation constitutes the first example of a homogeneous molybdenum-catalyzed acceptorless dehydrogenative coupling with alcohols and is believed to proceed by formation of a cis-coordinated molybdenum bis-N-heterocyclic carbene complex, which performs an oxidative addition to the alcohol, β-hydride elimination and reductive elimination of dihydrogen.

Tunable Ligand Effects on Ruthenium Catalyst Activity for Selectively Preparing Imines or Amides by Dehydrogenative Coupling Reactions of Alcohols and Amines

Selective dehydrogenative synthesis of imines from a variety of alcohols and amines was developed by using the ruthenium complex [RuCl2(dppea)2] (6 a: dppea=2-diphenylphosphino-ethylamine) in the presence of catalytic amounts of Zn(OCOCF3)2 and KOtBu, whereas the selective dehydrogenative formation of amides from the same sources was achieved by using another ruthenium complex, [RuCl2{(S)-dppmp}2] [6 d: (S)-dppmp=(S)-2-((diphenylphosphenyl)methyl)pyrrolidine], in the presence of catalytic amounts of Zn(OCOCF3)2 and potassium bis(trimethylsilyl)amide (KHMDS). Our previously reported ruthenium complex, [Ru(OCOCF3)2(dppea)2] (8 a), was the catalyst precursor for the imine synthesis, whereas [Ru(OCOCF3)2{(S)-dppmp}2] (8 d), which was derived from the treatment of 6 d with Zn(OCOCF3)2 and characterized by single-crystal X-ray analysis, was the pre-catalyst for the amide formation. Control experiments revealed that the zinc salt functioned as a reagent for replacing chloride anions with trifluoroacetate anions. Plausible mechanisms for both selective dehydrogenative coupling reactions are proposed based on a time-course study, Hammett plot, and deuterium-labeling experiments.

Oxaziridine cleavage with a low-valent nickel complex: Competing C-O and C-N fragmentation from oxazanickela(II)cyclobutanes

Reacting the low-valent nickel complex [(dtbpe)Ni]2(μ-η2:η2-C6H6) with oxaziridines was found to form mixtures of imine, amide and aldehyde products. If the N-substituent of the oxaziridine is sufficiently bulky, a short-lived intermediate can be isolated and characterized by X-ray diffraction studies as an oxazanickela(ii)cyclobutane. This is the first well-defined example of N-O oxidative addition of an oxaziridine to a transition metal. Subsequent fragmentation of this oxazanickelacyclobutane forms a complex mixture of products, including a nickel(ii) imido complex, demonstrating that oxaziridines can serve as nitrene precursors. Preliminary mechanistic analysis is consistent with a bimetallic mechanism of fragmentation of the oxazanickelacyclobutane to form the nickel imido and η2-aldehyde complexes.