Effect of impurities introduced by ball milling on hot pressed Boron carbide (cas 12069-32-8)

Add time:07/29/2019    Source:sciencedirect.com

Ball milling is commonly used refining process to improve sintering properties of boron carbide. However, this process often leads to the introduction of trace metal impurities into raw materials. It was found in this study that, with prolonged holding time and increased sintering temperature at 2000 °C, these metal impurities led to the recrystallization of boron carbide grains, which significantly affected mechanical properties of sintered boron carbide. Results showed that relative density of sample increased from 98.4%–98.9%, when sintering temperature was raised from 2000 °C to 2050 °C and holding time was extended from 30 min to 60 min. However, under these conditions, flexural strength of boron carbide decreased sharply from 403 MPa to 98 MPa and fracture toughness decreased from 4.4 MPa m1/2 to 2.3 MPa m1/2.

We also recommend Trading Suppliers and Manufacturers of Boron carbide (cas 12069-32-8). Pls Click Website Link as below: cas 12069-32-8 suppliers

Prev:Properties of Boron carbide (cas 12069-32-8) ceramics made by various methods for use in ITER
Next:Preparation of submicron Boron carbide (cas 12069-32-8) powder through gas-solid reaction method)