Crystallization temperature, vapor pressure, density and viscosity of lithium bromide + Lithium iodide (cas 10377-51-2) + ethylene glycol + water system for absorption refrigerators for automotive use
-
Add time:07/30/2019 Source:sciencedirect.com
Absorption refrigerators are expected for automotive use due to their advantage of utilizing waste heat from exhaust gas. The compactness and efficiency of the refrigeration system required for such use indicates a pair of water/lithium bromide (LiBr) as a promising working fluid. However, operation of absorption refrigerators for automotive use would be hampered by the crystallization of LiBr solution, because relatively high concentration of LiBr solution is necessary for automotive use in which the absorber should be air-cooled. Therefore, the crystallization temperature of LiBr solution needs to be reduced. In this study, we focused on LiBr + lithium iodide (LiI) + ethylene glycol (C2H4(OH)2) aqueous solution as an absorbent, due to its lower crystallization temperature compared with LiBr solution. We measured the crystallization temperature, saturated vapor pressure, density and viscosity of these solutions with different composition ratios. The measured saturated vapor pressure, density and viscosity were then correlated using proper regression equations.
We also recommend Trading Suppliers and Manufacturers of Lithium iodide (cas 10377-51-2). Pls Click Website Link as below: cas 10377-51-2 suppliers
Prev:Studies on electrical properties of composites based on lithium titanium phosphate with Lithium iodide (cas 10377-51-2)
Next:Improved Rate Performance of Lithium Sulfur Batteries by In-Situ Anchoring of Lithium iodide (cas 10377-51-2) in Carbon/Sulfur Cathode) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Improved Lithium iodide (cas 10377-51-2) neutron scintillator with Eu2+ activation: The elimination of Suzuki-Phase precipitates08/07/2019
- The effect of iodide and tri-iodide on the dye sensitized solar cell08/06/2019
- Thermoluminescence kinetic features of Lithium iodide (cas 10377-51-2) (LiI) single crystal grown by vertical Bridgman technique08/05/2019
- Microsolvation of Lithium iodide (cas 10377-51-2) dimer studied by ab initio calculations08/04/2019
- Scintillation characterization of thallium-doped Lithium iodide (cas 10377-51-2) crystals08/03/2019
- From the LiI-(CH3CN)1–10 small clusters to the solvation process in acetonitrile solutions of Lithium iodide (cas 10377-51-2)08/02/2019
- Effect of Lithium iodide (cas 10377-51-2) on the performance of dye sensitized solar cells (DSSC) using poly(ethylene oxide) (PEO)/poly(vinyl alcohol) (PVA) based gel polymer electrolytes08/01/2019
- Improved Rate Performance of Lithium Sulfur Batteries by In-Situ Anchoring of Lithium iodide (cas 10377-51-2) in Carbon/Sulfur Cathode07/31/2019
- Studies on electrical properties of composites based on lithium titanium phosphate with Lithium iodide (cas 10377-51-2)07/29/2019
-
Health and Chemical more >