Novel monolithic poly(p-methylstyrene-co-bis(p-vinylbenzyl)DIMETHYLSILANE (cas 1111-74-6)) capillary columns for biopolymer separation

Add time:08/18/2019    Source:sciencedirect.com

Hydrophobic organo-silane based monolithic capillary columns were prepared by thermally initiated free radical polymerisation within the confines of 200 μm i.d. fused silica capillaries. A novel crosslinker, namely bis(p-vinylbenzyl)dimethylsilane (BVBDMS), was copolymerised with p-methylstyrene (MS) in the presence of 2-propanol and toluene, using α,α′-azoisobutyronitrile (AIBN) as initiator. Monolithic capillary columns, differing in the total monomer, microporogen content and microporogen nature were fabricated and the chromatographic efficiency of each monolith, regarding the separation of proteins, peptides and oligonucleotides, was evaluated and compared. Changes in monolith morphology were monitored by scanning electron microscopy (SEM). Porosity and specific surface areas of the supports were studied by means of mercury intrusion porosimetry and BET measurements, respectively. Pressure drop vs. flow rate measurements proved the prepared poly(p-methylstyrene-co-bis(p-vinylbenzyl)dimethylsilane) (MS/BVBDMS) monoliths to be mechanically stable and swelling propensity (SP) factors of 0.78–1.10 indicate high crosslinking homogeneity.

We also recommend Trading Suppliers and Manufacturers of DIMETHYLSILANE (cas 1111-74-6). Pls Click Website Link as below: cas 1111-74-6 suppliers

Prev:Synthesis and cross-coupling reaction of alkenyl[(2-hydroxymethyl)phenyl]DIMETHYLSILANE (cas 1111-74-6)s
Next:Interaction of natural polyamines and DIMETHYLSILANE (cas 1111-74-6) analogues with membrane components)